Jute bags are widely used for packaging, storing and transporting foodgrains. Their strength, construction and dimensional consistency are important for handling and storage operations in agricultural supply chains.<\/p>\n
For manufacturers supplying these bags in India, IS 16372:2015 \u2013 Textiles: Jute Bags for Packing up to 30 kg Foodgrains \u2014 Specification<\/strong> is the relevant Indian Standard. The standard specifies constructional details and other requirements for jute bags intended for packing foodgrains in quantities up to 30 kg. <Cite refs={[“turn979998search16″,”turn979998search18”]}\/><\/p>\n The Bureau of Indian Standards (BIS) has published a dedicated product manual for certification under Scheme-I. Qualitance India supports manufacturers with BIS certification consultancy, technical documentation, testing coordination and factory-readiness assistance. <Cite refs={[“turn979998search15”]}\/><\/p>\n IS 16372:2015 specifies constructional and performance requirements for jute bags used to pack up to 30 kg of foodgrains.<\/p>\n The standard addresses product characteristics such as:<\/p>\n The BIS Laboratory Information Management System (LIMS) identifies these parameters in its testing information for IS 16372:2015. <Cite refs={[“turn979998search7”]}\/><\/p>\n Manufacturers should obtain the official standard, including applicable amendments, before finalising their production specifications and internal quality-control procedures.<\/p>\n Yes. IS 16372:2015 is listed under the Jute Bags (Quality Control) Order, 2022<\/strong>, notified through S.O. 2601(E), dated 6 June 2022. The order requires covered jute bags to conform to the corresponding Indian Standard and bear the Standard Mark under a BIS licence through Scheme-I of the BIS (Conformity Assessment) Regulations, 2018. <Cite refs={[“turn979998search17″,”turn979998search0”]}\/><\/p>\n The order excludes jute bags intended for export from its application. Businesses should review the full notification and any subsequent amendments before relying on an exemption. <Cite refs={[“turn979998search17”]}\/><\/p>\n Manufacturers and businesses should verify:<\/p>\n A manufacturer should not assume that all jute bags fall under IS 16372:2015. Other products, such as bags designed for 50 kg of foodgrains, sugar bags and other jute bag types, may be covered by separate standards. <Cite refs={[“turn979998search0″,”turn979998search17”]}\/><\/p>\n The standard covers jute bags for packing foodgrains up to 30 kg. Manufacturers should ensure that the product description, construction and intended capacity align with the standard.<\/p>\n The BIS product manual identifies the raw-material and grouping guidelines relevant to certification. It states that bags of any type may be tested to cover all types intended to be included in the licence scope<\/strong>, subject to the manual’s requirements. <Cite refs={[“turn979998search15”]}\/><\/p>\n Before applying, manufacturers should prepare a product specification sheet covering:<\/p>\n Where the manufacturer intends to include an ECO Mark claim, the additional environmental labelling requirements identified in the product manual must also be met. <Cite refs={[“turn979998search15”]}\/><\/p>\n The BIS product manual states that the bags are to be made from a single piece of plain-woven jute hessian of uniform construction, with a nominal mass of 267 g\/m\u00b2<\/strong>. <Cite refs={[“turn979998search15”]}\/><\/p>\n Raw-material conformity may be established through one of the evidence routes identified in the manual:<\/p>\n Manufacturers should maintain records supporting the conformity of incoming jute hessian.<\/p>\n A practical raw-material control system should include:<\/p>\n The exact acceptance criteria should be confirmed from the applicable clauses of IS 16372:2015 and its amendments.<\/p>\n Testing is necessary to demonstrate conformity with the applicable requirements of IS 16372:2015. The BIS product manual and LIMS identify the relevant inspection and testing parameters. <Cite refs={[“turn979998search15″,”turn979998search7”]}\/><\/p>\n Fabric mass and corrected mass per bag are important characteristics for verifying material quantity and consistency.<\/p>\n Testing should follow the applicable methods and acceptance criteria in the standard.<\/p>\n Dimensional inspection verifies the bag’s specified measurements. The BIS testing information identifies outside length and outside width among the relevant checks. <Cite refs={[“turn979998search7”]}\/><\/p>\n Ends and picks per unit length are fabric construction parameters used to assess weaving consistency.<\/p>\n Breaking strength testing evaluates the mechanical strength of the jute sacking. The applicable test method and acceptance limits must be followed.<\/p>\n Seam strength is important because the stitched portions must withstand the loads encountered during normal handling and use.<\/p>\n Moisture regain is identified in the testing information as a relevant parameter, with a maximum limit specified by the standard. The applicable test method and limit should be confirmed from the official specification. <Cite refs={[“turn979998search7”]}\/><\/p>\n The BIS LIMS identifies safety stitch, hemming at the mouth and freedom from defects among the inspection and testing parameters. <Cite refs={[“turn979998search7”]}\/><\/p>\n The manufacturer should maintain suitable in-process inspection and finished-bag inspection records.<\/p>\n Important:<\/strong> This list summarises relevant test parameters. The complete testing programme, acceptance limits, test methods and sampling arrangements must be established from the official standard, applicable amendments and current BIS product manual.<\/p>\n The August 2022 BIS product manual provides sampling and grouping guidelines for IS 16372:2015. It specifies the construction and raw-material characteristics to be checked and allows any bag type to be tested to cover the types intended for the licence scope, subject to the manual’s requirements. <Cite refs={[“turn979998search15”]}\/><\/p>\n A numerical finished-bag sample quantity should be confirmed from the complete current product manual and applicable BIS sampling instructions before preparing samples.<\/p>\n Manufacturers should establish the following before dispatch:<\/p>\n Do not assume a sample quantity based solely on another jute bag standard; different products can have different sampling requirements.<\/p>\n Manufacturers should review production and testing arrangements before applying for BIS certification.<\/p>\n A factory-readiness review should cover:<\/p>\n The BIS product manual allows raw-material conformity to be supported by supplier test certificates, NABL or third-party laboratory reports, or in-house testing. This provision relates to raw-material conformity and should not be interpreted as automatically allowing every finished-product test to be outsourced. <Cite refs={[“turn979998search15”]}\/><\/p>\n The applicable testing scheme should be reviewed to determine which tests must be conducted in-house and which external testing arrangements are accepted by BIS.<\/p>\n The following checklist can help manufacturers prepare for the application. The final document list should be confirmed against the current BIS application procedure.<\/p>\n This checklist supports preparation but does not replace the official BIS application requirements.<\/p>\n The following steps describe a general preparation workflow. The exact procedure should be confirmed against current BIS requirements.<\/p>\n Step 1: Confirm the applicable standard and QCO<\/strong><\/p>\n Verify that the product falls under IS 16372:2015 and check the Jute Bags Quality Control Order and applicable amendments.<\/p>\n Step 2: Review the product construction<\/strong><\/p>\n Confirm the type of jute hessian, nominal fabric mass, bag dimensions and stitching arrangements.<\/p>\n Step 3: Assess factory readiness<\/strong><\/p>\n Review raw-material sourcing, manufacturing facilities, testing arrangements, inspection procedures and recordkeeping.<\/p>\n Step 4: Prepare the application documents<\/strong><\/p>\n Compile business, factory, product, raw-material and quality-control documentation.<\/p>\n Step 5: Arrange samples and testing<\/strong><\/p>\n Confirm the current sampling instructions and testing requirements. Ensure that the samples represent the product scope proposed for certification.<\/p>\n Step 6: Complete BIS assessment<\/strong><\/p>\n Address application scrutiny, factory assessment, testing and any observations or corrective actions required by BIS.<\/p>\n Step 7: Obtain the licence before using the Standard Mark<\/strong><\/p>\n The ISI mark may be used only after the required BIS authorisation has been granted and in accordance with the licence conditions.<\/p>\n Step 8: Maintain ongoing conformity<\/strong><\/p>\n Continue the prescribed production controls, inspection, testing, recordkeeping and marking requirements.<\/p>\n The total cost depends on the current BIS fee schedule, testing requirements, factory readiness and scope of the application.<\/p>\n Potential cost components include:<\/p>\n The BIS LIMS page for IS 16372:2015 lists testing parameters and individual charge fields, but the accessible listing does not provide a single complete testing total. The applicable charges should therefore be obtained directly from the current laboratory listing or laboratory quotation. <Cite refs={[“turn979998search7”]}\/><\/p>\n A project-specific estimate should be prepared after reviewing the product construction, proposed scope, testing requirements and current BIS fees.<\/p>\n The certification timeline depends on application completeness, factory readiness, testing availability, sample conformity and BIS processing.<\/p>\n No single completion period can be guaranteed for every manufacturer. Delays may occur if documentation is incomplete, samples fail the applicable tests, material conformity evidence is insufficient or the factory needs to address assessment observations.<\/p>\n A realistic timeline should be developed after reviewing the manufacturing facility and proposed product scope.<\/p>\n Manufacturers may experience delays or additional costs when:<\/p>\n A pre-application technical review can help identify these gaps before formal assessment and testing.<\/p>\n IS 16372:2015 is the Indian Standard titled Textiles \u2013 Jute Bags for Packing up to 30 kg Foodgrains \u2013 Specification<\/em>. It specifies constructional and other requirements for these bags. <Cite refs={[“turn979998search16”]}\/><\/p>\n Yes. IS 16372:2015 is listed under the Jute Bags (Quality Control) Order, 2022, which requires covered bags to conform to the Indian Standard and bear the BIS Standard Mark under a licence. The order excludes bags intended for export. <Cite refs={[“turn979998search17″,”turn979998search0”]}\/><\/p>\n The manual specifies a single piece of plain-woven jute hessian of uniform construction with a nominal mass of 267 g\/m\u00b2. <Cite refs={[“turn979998search15”]}\/><\/p>\n The product manual allows conformity to be established through a supplier test certificate, a NABL or third-party laboratory report, or in-house testing. <Cite refs={[“turn979998search15”]}\/><\/p>\n Relevant parameters include fabric mass, dimensions, ends and picks, corrected mass per bag, breaking strength, seam strength, moisture regain, stitching, hemming and freedom from defects. The complete requirements must be confirmed from the official standard and current testing scheme. <Cite refs={[“turn979998search7”]}\/><\/p>\n The BIS product manual states that bags of any type may be tested to cover all types intended to be included in the licence scope, subject to the manual’s requirements. The proposed scope should be confirmed with BIS. <Cite refs={[“turn979998search15”]}\/><\/p>\n The total cost depends on current BIS fees, laboratory charges, product scope, factory readiness and other project-specific expenses. A complete estimate should be prepared after reviewing the proposed application.<\/p>\n Planning to apply for BIS certification for jute bags for packing up to 30 kg of foodgrains? Qualitance India<\/strong> can support your certification preparation through product-standard applicability review, documentation assistance, factory-readiness assessment, testing coordination and BIS application support.<\/p>\n Our consultancy approach focuses on your bag construction, raw-material specifications, manufacturing process, quality-control arrangements and applicable regulatory requirements.<\/p>\n Qualitance India \u2013 Improving Quality & Competence<\/strong><\/p>\n Contact us to discuss your jute bag specifications, factory facilities and BIS certification requirements.<\/p>\n Regulatory note: Indian Standards, amendments, QCOs, exemptions, testing requirements, fees and application procedures may change. Verify the latest official BIS requirements before making certification or market-placement decisions.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":" BIS Certification for Jute Bags for Packing up to 30 kg of Foodgrains \u2013 IS 16372:2015 Jute bags are widely used for packaging, storing and transporting foodgrains. Their strength, construction and dimensional consistency are important for handling and storage operations in agricultural supply chains. For manufacturers supplying these bags in India, IS 16372:2015 \u2013 Textiles: […]<\/p>\n","protected":false},"author":1,"featured_media":4333,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification for Jute Bags for Packing up to 30 kg of Foodgrains | IS 16372:2015 - Qualitance India","description":"BIS Certification for Jute Bags for Packing up to 30 kg of Foodgrains \u2013 IS 16372:2015 Jute bags are widely used for packaging, storing and transporting foodgrai"},"_slim_seo_primary_term_category":46,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[46,1,47],"tags":[],"class_list":["post-4332","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bis-certification","category-blog","category-manufacturers"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4332","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=4332"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4332\/revisions"}],"predecessor-version":[{"id":4334,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4332\/revisions\/4334"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/4333"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=4332"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=4332"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=4332"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}1. What Is IS 16372:2015?<\/h2>\n
\n
2. Is BIS Certification Mandatory for Jute Bags Under IS 16372:2015?<\/h2>\n
\n
3. Product Scope Under IS 16372:2015<\/h2>\n
\n
4. Raw-Material Requirements<\/h2>\n
\n
\n
5. BIS Testing Requirements for Jute Bags<\/h2>\n
5.1 Fabric mass and corrected mass per bag<\/h3>\n
5.2 Dimensions<\/h3>\n
5.3 Ends and picks<\/h3>\n
5.4 Breaking strength of sacking<\/h3>\n
5.5 Seam strength<\/h3>\n
5.6 Moisture regain<\/h3>\n
5.7 Stitching, hemming and defects<\/h3>\n
6. Sample Requirements for BIS Certification<\/h2>\n
\n
7. Factory and Laboratory Requirements<\/h2>\n
\n
8. Documents Required for BIS Certification<\/h2>\n
A. Business and factory documents<\/h3>\n
\n
B. Product and technical documents<\/h3>\n
\n
C. Raw-material and quality-control documents<\/h3>\n
\n
D. Application-related documents<\/h3>\n
\n
9. BIS Certification Process for IS 16372:2015<\/h2>\n
10. BIS Certification Fees and Testing Costs<\/h2>\n
\n
11. How Long Does BIS Certification Take?<\/h2>\n
12. Common Challenges During Certification<\/h2>\n
\n
13. Frequently Asked Questions<\/h2>\n
Q1. What is IS 16372:2015?<\/h3>\n
Q2. Is BIS certification mandatory for these jute bags?<\/h3>\n
Q3. What raw material is specified in the BIS product manual?<\/h3>\n
Q4. How can raw-material conformity be demonstrated?<\/h3>\n
Q5. Which tests are relevant to IS 16372:2015?<\/h3>\n
Q6. Can the same licence scope cover different types of bags?<\/h3>\n
Q7. What is the total cost of BIS certification?<\/h3>\n
Get BIS Certification Consultancy for IS 16372:2015<\/h2>\n
\n
Official References<\/h2>\n
\n