Asbestos cement building boards are cement-based building products manufactured using asbestos fibre along with cement and other permitted materials. They have historically been used for building applications where properties such as rigidity, fire resistance and moisture resistance are required.<\/p>\n
For manufacturers dealing with Asbestos Cement Building Boards<\/strong>, the applicable Indian Standard is IS 2098:1997 \u2013 Asbestos Cement Building Boards \u2013 Specification (First Revision)<\/strong>. BIS has issued Product Manual PM\/IS 2098\/1\/April 2020<\/strong> for this product, and certification is operated under Scheme-I<\/strong>.<\/p>\n IS 2098:1997 is also included in the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024<\/strong>. Under that order, the specified products must conform to the relevant Indian Standard and bear the Standard Mark under a BIS licence according to Scheme-I, subject to the exemptions stated in the order.<\/p>\n Qualitance India provides complete BIS Certification consultancy for Asbestos Cement Building Boards<\/strong>, covering product assessment, class and thickness scope, grouping, sample planning, testing coordination, documentation, factory inspection preparation, BIS application filing, licence processing and post-licence compliance.<\/p>\n Important health and safety note:<\/strong> Asbestos fibres can pose serious health risks when inhaled. BIS certification addresses conformity with the applicable product standard; it should not be interpreted as eliminating occupational or environmental health risks associated with asbestos. Manufacturers and handlers should comply with all applicable occupational-safety, environmental and legal requirements for asbestos.<\/p>\n<\/blockquote>\n IS 2098:1997<\/strong> is the Indian Standard for:<\/p>\n Asbestos Cement Building Boards \u2013 Specification<\/strong><\/p>\n The standard specifies requirements relating to:<\/p>\n The standard specifically distinguishes asbestos cement building boards from asbestos cement flat sheets and silica-asbestos-cement flat sheets, which are covered under other standards.<\/p>\n The current BIS Scheme-I page lists:<\/p>\n IS 2098:1997 \u2013 Asbestos Cement Building Boards<\/strong><\/p>\n under the product category Asbestos or Fibre Cement based Products<\/strong>. The same category currently references the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024<\/strong> and 2026 exemption orders relating to import and purchase.<\/p>\n The BIS Product Manual currently available for this product is:<\/p>\n PM\/IS 2098\/1\/April 2020<\/strong><\/p>\n The Product Manual records:<\/p>\n Yes, the product is included in the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024<\/strong>.<\/p>\n The order specifies that the listed products must conform to the corresponding Indian Standard and bear the Standard Mark under a BIS licence as per Scheme-I<\/strong>. It also states that the order does not apply to goods manufactured domestically for export.<\/p>\n The QCO was notified on 6 March 2024<\/strong> and provides that the order comes into force after six months from publication.<\/p>\n It also provides separate transition periods for small and micro enterprises:<\/p>\n These transition periods have already elapsed. Manufacturers should therefore comply with the applicable requirements unless a specific exemption applies.<\/p>\n The current BIS Scheme-I listing references:<\/p>\n The 2026 import exemption order provides a framework for certain goods covered by QCOs where the consignment was shipped before the implementation date and the Bill of Entry is filed within the prescribed period after implementation. The exact conditions depend on the applicable QCO and should be checked before relying on the exemption.<\/p>\n The BIS Product Manual identifies three classes of Asbestos Cement Building Boards:<\/p>\n The Product Manual also states that boards of other dimensions and thicknesses may be supplied by mutual agreement between manufacturer and purchaser.<\/p>\n Building boards are expected to maintain their specified dimensions and structural performance during handling and use.<\/p>\n The BIS certification framework for IS 2098:1997 provides control over:<\/p>\n Certification therefore gives manufacturers a structured system for demonstrating conformity with the specified Indian Standard.<\/p>\n The Product Manual identifies the following material categories for sampling:<\/p>\n The underlying standard specifies the composition requirements for asbestos cement building boards. Historical standard text identifies permitted cement types and asbestos fibre together with compatible pozzolanic materials, fillers and pigments.<\/p>\n Manufacturers should maintain proper incoming-material records and traceability for all materials used in production.<\/p>\n A typical manufacturing process may include:<\/p>\n Raw Material Receipt \u2192 Material Inspection \u2192 Fibre\/Cement Preparation \u2192 Mixing \u2192 Slurry Preparation \u2192 Sheet\/Board Formation \u2192 Layer Formation \u2192 Pressing\/Compaction \u2192 Cutting\/Trimming \u2192 Curing \u2192 Drying\/Conditioning \u2192 Surface Inspection \u2192 Dimensional Inspection \u2192 Load Testing \u2192 Water Absorption Testing \u2192 Marking \u2192 Packing<\/strong><\/p>\n The precise process depends on the manufacturing technology and plant configuration.<\/p>\n Production controls should be established to maintain:<\/p>\n IS 2098 requires the finished board to be free from visible defects that impair its appearance or serviceability.<\/p>\n The standard describes the surface as having uniform texture, with at least one smooth surface, and requires boards to be flat, rectangular, neatly trimmed and square at the corners.<\/p>\n The BIS Product Manual requires general appearance and finish testing on each board<\/strong>.<\/p>\n The BIS Product Manual specifies:<\/p>\n Sample Size: 2 Boards.<\/strong><\/p>\n The sample should be representative of the proposed product scope and should be selected according to the applicable class and thickness grouping.<\/p>\n Grouping is provided in Annex A<\/strong> of the Product Manual.<\/p>\n Because higher-thickness boards are considered more critical to manufacture, the grouping system allows a properly selected higher-thickness sample to cover lower thicknesses within the same class.<\/p>\n The Product Manual specifies:<\/p>\n The manufacturer must declare the intended varieties, and the final scope may be restricted based on manufacturing and testing capabilities. During operation of the licence, BIS may ensure that varieties in the scope are tested in rotation as far as possible.<\/p>\n Suppose a manufacturer produces:<\/p>\n Testing a Class A board at maximum thickness can potentially support inclusion of Classes B and C under the grouping provisions, subject to the manufacturer’s facilities and the applicable BIS approval.<\/p>\n Similarly, a Class B sample can support Class C coverage.<\/p>\n However, the final licence scope should always be approved against the actual manufacturer capability and declared product varieties.<\/p>\n Composition is controlled according to Clause 3 of IS 2098:1997.<\/p>\n Under the Product Manual, one sample is checked for each material consignment. Further testing is not required where the consignment is received with the manufacturer’s certificate or is ISI marked, subject to the stated requirements.<\/p>\n Where colouring matter is used, the applicable requirements of Clause 4 apply.<\/p>\n The Product Manual provides for one sample of colouring matter and notes that further testing is not required where the consignment is received with a manufacturer’s certificate.<\/p>\n Length and width must meet the dimensional requirements of the standard.<\/p>\n The Product Manual specifies testing of:<\/p>\n 1% of the control unit, subject to a minimum of 5 boards.<\/strong><\/p>\n If there is a failure, all boards are to be tested and defective boards rejected.<\/p>\n Thickness is checked as part of the dimensional control system.<\/p>\n The Product Manual includes thickness with length and width under the same control frequency:<\/p>\n 1% subject to a minimum of 5 boards per control unit.<\/strong><\/p>\n Each board is inspected for general appearance and finish.<\/p>\n The Product Manual specifies:<\/p>\n Each Board<\/strong>.<\/p>\n Load-bearing capacity is one of the most important performance tests.<\/p>\n The Product Manual requires:<\/p>\n Three samples from each control unit.<\/strong><\/p>\n The load-bearing requirements depend on the board class:<\/p>\n These values are given in the Product Manual’s grouping table.<\/p>\n Water absorption is an important physical property.<\/p>\n The Product Manual requires:<\/p>\n Three samples from each control unit.<\/strong><\/p>\n The test method references IS 5913<\/strong>, as stated in the Product Manual.<\/p>\n The load-bearing test evaluates the board’s ability to withstand the specified load under the prescribed test conditions.<\/p>\n The Product Manual identifies:<\/p>\n The testing frequency is three samples per control unit.<\/p>\n Where the factory operates in three shifts, the Product Manual requires at least one sample to be drawn from each shift for the load-bearing test.<\/p>\n If one sample fails, the manual prescribes additional testing of the same control unit according to the stated procedure; if any of the required samples fails, the control unit is rejected.<\/p>\n Water absorption testing evaluates the amount of water absorbed by the board under the prescribed conditions.<\/p>\n The Product Manual identifies equipment including:<\/p>\n The test is conducted on three samples from each control unit.<\/p>\n The Product Manual provides an indicative list of major testing equipment.<\/p>\n The BIS Product Manual specifically states that the equipment list is indicative and should not be treated as exhaustive<\/strong>.<\/p>\n The manufacturer must maintain a suitably equipped and staffed laboratory for carrying out the specified tests.<\/p>\n The Product Manual requires:<\/p>\n The manufacturer must prepare a calibration plan for testing equipment and maintain records of tests performed to establish conformity.<\/p>\n The Product Manual allows subcontracting to:<\/p>\n subject to the applicable provisions.<\/p>\n This can be useful when a manufacturer needs external support for specific testing activities, while still maintaining the required factory quality-control system.<\/p>\n The Product Manual defines the control unit as:<\/p>\n All Asbestos Cement Building Boards of the same class and thickness manufactured under similar production conditions in a day.<\/strong><\/p>\n This definition is important because several testing frequencies are linked directly to the control unit.<\/p>\n The manufacturer should therefore maintain proper traceability between:<\/p>\n The Scheme of Inspection and Testing establishes controls throughout production.<\/p>\n The Product Manual requires labelling and marking according to IS 2098:1997<\/strong>.<\/p>\n All production that:<\/p>\n should bear the Standard Mark<\/strong>.<\/p>\n Historical standard text also specifies board marking requirements and identifies the need for a warning relating to asbestos handling.<\/p>\n Manufacturers must ensure that the exact current marking artwork, wording and placement comply with the applicable standard and BIS licence conditions.<\/p>\n Because asbestos presents a recognized inhalation hazard, manufacturers should pay particular attention to legally required warnings, occupational controls and safe handling.<\/p>\n The BIS technical summary for IS 2098 notes that a warning sign is used to caution persons handling asbestos and asbestos-containing products about risks from exposure to asbestos dust.<\/p>\n BIS certification does not replace workplace safety controls. Cutting, drilling, breaking or otherwise disturbing asbestos-containing products can generate hazardous dust, so appropriate statutory precautions should be followed.<\/p>\n Packaging should protect the boards from breakage and damage during:<\/p>\n Marking and packaging requirements should be applied as specified by the standard and licence.<\/p>\n A manufacturer should maintain control over the following areas.<\/p>\n The formulation should be controlled to maintain consistent composition.<\/p>\n Thickness and uniformity should be monitored during production.<\/p>\n Curing conditions should be controlled to achieve the required board properties.<\/p>\n Edges should be straight and boards should remain square.<\/p>\n The finished board should be checked for:<\/p>\n A manufacturer applying for BIS certification should be able to demonstrate adequate production and quality-control capability.<\/p>\n Factory readiness may include:<\/p>\n Qualitance India assists manufacturers in reviewing these requirements before BIS assessment.<\/p>\n The typical process is:<\/p>\n Product Identification \u2192 IS 2098:1997 Applicability \u2192 Class & Thickness Selection \u2192 Grouping Review \u2192 Factory Assessment \u2192 Documentation \u2192 Sample Preparation \u2192 Laboratory Testing \u2192 BIS Application \u2192 Factory Inspection \u2192 Compliance \u2192 BIS Licence \u2192 Standard Marking \u2192 Post-Licence Compliance<\/strong><\/p>\n The exact process may vary according to the manufacturer’s factory setup and current BIS requirements.<\/p>\n Common documents may include:<\/p>\n The exact checklist should be finalized according to the BIS application and current product requirements.<\/p>\n Current BIS LIMS listings show testing facilities for IS 2098:1997 \u2013 Asbestos Cement Building Boards<\/strong>.<\/p>\n One current BIS LIMS listing displays:<\/p>\n \u20b913,000 excluding taxes<\/strong><\/p>\n for the listed testing scope. The displayed scope includes requirements such as length, width, thickness, load-bearing capacity, water absorption, appearance and marking.<\/p>\n Another current BIS Central Laboratory listing displays:<\/p>\n \u20b93,300 excluding taxes<\/strong><\/p>\n for the complete listed testing scope.<\/p>\n These figures demonstrate that laboratory charges can differ significantly by laboratory and scope. Therefore, the current BIS LIMS quotation should be confirmed before sample submission<\/strong>.<\/p>\n The total certification cost is not limited to testing.<\/p>\n It can include:<\/p>\n The total cost depends on the manufacturer’s proposed class\/thickness scope and existing factory facilities.<\/p>\n The certification timeline depends on:<\/p>\n The Product Manual states that general appearance\/finish and dimensions can be tested in a day, but the complete certification process can take longer because application processing, factory assessment and compliance activities occur separately.<\/p>\n The manufacturer may not correctly identify Class A, B or C.<\/p>\n The proposed licence scope may not match the actual production capability.<\/p>\n A sample should be selected according to the applicable grouping provisions.<\/p>\n Insufficient board strength can result in non-conformity.<\/p>\n Variation in composition, curing or production parameters may affect water absorption.<\/p>\n Poor board-forming control can cause thickness variation.<\/p>\n Length and width outside permitted tolerances can create rejection.<\/p>\n Visible defects or irregular finishing can result in non-conformity.<\/p>\n Testing equipment must have appropriate calibration records.<\/p>\n Quality-control records should be maintained systematically.<\/p>\n Only conforming production within the approved licence scope should carry the Standard Mark.<\/p>\n The requirements are particularly relevant to manufacturers of asbestos cement building boards intended for the Indian market and covered under the applicable QCO.<\/p>\n This may include manufacturers supplying boards for:<\/p>\n Businesses should verify all current legal, environmental and occupational requirements applicable to asbestos-containing products before manufacturing, handling or supplying them.<\/p>\n Certification supports compliance with the applicable QCO requirements.<\/p>\n The manufacturer operates against defined material, dimensional and performance requirements.<\/p>\n Routine testing helps maintain consistent board quality.<\/p>\n Certification demonstrates conformity to the applicable Indian Standard.<\/p>\n BIS certification can support supply where the product is required to comply with IS 2098.<\/p>\n The inspection and testing system establishes a structured production-control framework.<\/p>\n Qualitance India provides end-to-end consultancy for Asbestos Cement Building Boards as per IS 2098:1997<\/strong>.<\/p>\n We assess the product and confirm the applicable BIS standard and certification route.<\/p>\n We help determine the applicable:<\/p>\n We review the proposed scope and representative samples according to Annex A.<\/p>\n We assist with the required 2-board sample<\/strong> for certification testing.<\/p>\n We coordinate:<\/p>\n We assist in preparing the required certification documents.<\/p>\n We review manufacturing, testing and quality-control facilities.<\/p>\n We assist with application preparation and submission.<\/p>\n We help prepare the plant for BIS assessment.<\/p>\n We assist with responses to documentary and technical observations.<\/p>\n We support the certification process through licence approval.<\/p>\n We provide support for applicable renewal, scope changes and continuing compliance activities.<\/p>\n Before applying for BIS certification:<\/p>\n \u2611 IS 2098:1997 applicability confirmed IS 2098:1997 is the Indian Standard for Asbestos Cement Building Boards \u2013 Specification (First Revision)<\/strong>.<\/p>\n Yes. IS 2098:1997 is included in the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024.<\/p>\n Certification is under Scheme-I<\/strong>.<\/p>\n The current BIS Product Manual is PM\/IS 2098\/1\/April 2020<\/strong>.<\/p>\n The standard covers Class A, Class B and Class C<\/strong> building boards.<\/p>\n Class A is specified at 6 mm<\/strong> in the Product Manual’s classification table.<\/p>\n Class B is specified at 5 mm<\/strong>.<\/p>\n Class C is specified at 4 mm<\/strong>.<\/p>\n The Product Manual identifies 2440 mm, 1830 mm and 1220 mm.<\/p>\n The specified width is 1220 mm<\/strong>.<\/p>\n The minimum average load-bearing capacity is 20 kg<\/strong>.<\/p>\n The minimum individual load-bearing capacity is 15 kg<\/strong>.<\/p>\n The minimum average load-bearing capacity is 15 kg<\/strong>.<\/p>\n The minimum individual load-bearing capacity is 10 kg<\/strong>.<\/p>\n The minimum average load-bearing capacity is 15 kg<\/strong>.<\/p>\n The minimum individual load-bearing capacity is 10 kg<\/strong>.<\/p>\n The Product Manual specifies 2 boards<\/strong>.<\/p>\n Yes. Grouping is provided in Annex A.<\/p>\n Yes, the grouping guideline states that when Class A is tested, Classes B and C may be included in the scope, subject to the specified conditions.<\/p>\n Yes, the grouping guideline states that when Class B is tested, Class C may be included in the scope.<\/p>\n The Product Manual states that boards of other dimensions and thicknesses may be supplied by mutual agreement between manufacturer and supplier.<\/p>\n The main conformity areas are composition, colouring matter where applicable, length, width, thickness, general appearance and finish, load-bearing capacity and water absorption.<\/p>\n Dimensions and thickness are checked at 1% subject to a minimum of 5 boards per control unit<\/strong> under the Product Manual.<\/p>\n General appearance and finish are checked on each board<\/strong>.<\/p>\n Three samples are tested from each control unit.<\/p>\n Three samples are tested from each control unit.<\/p>\n All boards of the same class and thickness manufactured under similar production conditions in a day constitute a control unit.<\/p>\n A suitably equipped and staffed laboratory must be maintained for the specified testing arrangements.<\/p>\n The Product Manual permits subcontracting to BIS-recognized or Government laboratories empanelled by BIS, subject to applicable conditions.<\/p>\n The Product Manual identifies a steel scale, thickness gauge, thermostatically controlled water bath, air conditioner, room heater, sheet cutter and load-applying arrangement according to IS 5913.<\/p>\n Equipment includes a steel scale, water bath, weighing balance, hot-air oven, damp cloth, desiccator and sheet cutter.<\/p>\n Yes. The manufacturer must prepare a calibration plan for testing equipment.<\/p>\n Yes. The manufacturer must maintain test records used to establish conformity.<\/p>\n Yes. Production conforming to the Indian Standard and covered by the licence should bear the Standard Mark.<\/p>\n BIS technical material notes a warning sign for persons handling asbestos and asbestos-containing products to caution them about exposure to asbestos dust.<\/p>\n No. BIS certification demonstrates conformity with the applicable product standard. It does not eliminate the occupational or environmental risks associated with asbestos exposure.<\/p>\n The applicable order is the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024<\/strong>.<\/p>\n The 2024 order was notified on 6 March 2024 and states that it comes into force after six months from publication.<\/p>\n The order specifically states that it does not apply to goods or articles manufactured domestically for export.<\/p>\n Yes. The BIS Scheme-I listing references 2026 orders concerning exemptions against import and purchase.<\/p>\n Current BIS LIMS entries display testing charges such as \u20b913,000 excluding taxes<\/strong> in one laboratory and \u20b93,300 excluding taxes<\/strong> in another for the listed IS 2098 scope.<\/p>\n No. Laboratory charges vary by laboratory, scope, applicable tests and other conditions.<\/p>\n Under the grouping guideline, a sample at maximum thickness for a class can cover boards up to and including the tested thickness for that class, subject to the applicable conditions.<\/p>\n Testing Class A can allow Classes B and C to be included under the grouping provisions, subject to manufacturing and testing capability.<\/p>\n The Product Manual states that all boards in the control unit shall be tested and defective boards rejected.<\/p>\n The Product Manual specifies additional sampling and retesting procedures for failures; if the prescribed retest conditions are not satisfied, the control unit is rejected.<\/p>\n Other dimensions and thicknesses may be supplied by mutual agreement between manufacturer and supplier, subject to the applicable standard requirements.<\/p>\n The manufacturer must demonstrate suitable manufacturing, testing and quality-control capability as part of the BIS certification process.<\/p>\n Manufacturers capable of meeting the applicable product, factory, testing and quality requirements can apply for BIS certification.<\/p>\n Yes. Qualitance India provides complete consultancy covering product assessment, class\/thickness scope, grouping, sample planning, testing, documentation, factory inspection preparation, BIS application, licence processing and post-licence compliance.<\/p>\n Qualitance India also provides consultancy for:<\/p>\n Manufacturers dealing with asbestos or fibre-cement-based products may also need to evaluate:<\/p>\n Qualitance India provides complete BIS Certification consultancy for regulated construction and building-material products.<\/p>\n We identify the correct Indian Standard and certification route.<\/p>\n We help determine the applicable class and thickness scope.<\/p>\n We assist with representative sample selection and licence-scope planning.<\/p>\n We coordinate laboratory testing for dimensions, load-bearing capacity, water absorption and other applicable requirements.<\/p>\n We assist in preparing and organizing BIS application documents.<\/p>\n We review manufacturing, testing, calibration and quality-control arrangements.<\/p>\n We support application preparation and submission.<\/p>\n We help prepare the manufacturing unit for BIS assessment.<\/p>\n We assist with technical and documentary observations.<\/p>\n We support the certification process through the applicable licence stage.<\/p>\n We provide ongoing support for renewal, scope and other applicable BIS requirements.<\/p>\n Qualitance India \u2013 Your Certification & Compliance Partner<\/strong><\/p>\n Phone:<\/strong> +91 93106 15170 For BIS Certification of Asbestos Cement Building Boards as per IS 2098:1997<\/strong>, Qualitance India provides complete consultancy covering product assessment, class and thickness selection, grouping, sample preparation, testing, documentation, factory inspection preparation, BIS application, licence processing and post-licence compliance.<\/p>\n IS 2098:1997 \u2013 Asbestos Cement Building Boards<\/strong> establishes requirements for composition, dimensions, appearance, finish, load-bearing capacity, water absorption and other quality characteristics. BIS Product Manual PM\/IS 2098\/1\/April 2020<\/strong> provides the Scheme-I certification framework, including a 2-board sample<\/strong>, product grouping, testing equipment and the Scheme of Inspection and Testing.<\/p>\n The product is included in the Asbestos or Fibre Cement based Products (Quality Control) Order, 2024<\/strong>, which requires the specified products to conform to the relevant Indian Standard and bear the Standard Mark under a BIS licence according to Scheme-I, subject to applicable exemptions.<\/p>\n The main product classes are \n
What is IS 2098:1997?<\/h2>\n
\n
Current BIS Certification Status<\/h2>\n
\n
Is BIS Certification Mandatory for Asbestos Cement Building Boards?<\/h2>\n
Implementation Timeline<\/h3>\n
\n
2026 Import and Purchase Exemptions<\/h2>\n
\n
Product Classification Under IS 2098:1997<\/h2>\n
Class A<\/h3>\n
\n
Class B<\/h3>\n
\n
Class C<\/h3>\n
\n
Why BIS Certification is Important<\/h2>\n
\n
Composition Requirements<\/h2>\n
\n
Manufacturing Process for Asbestos Cement Building Boards<\/h2>\n
\n
General Appearance and Finish<\/h2>\n
BIS Sample Size<\/h2>\n
BIS Grouping Guidelines<\/h2>\n
Class-Based Grouping<\/h3>\n
\n
Example of Practical Scope Planning<\/h2>\n
\n
Main BIS Tests for Asbestos Cement Building Boards<\/h2>\n
1. Composition<\/h3>\n
2. Colouring Matter<\/h3>\n
3. Length and Width<\/h3>\n
4. Thickness<\/h3>\n
5. General Appearance and Finish<\/h3>\n
6. Load-Bearing Capacity<\/h3>\n
\n\n
\n Class<\/th>\n Minimum Average Load<\/th>\n Minimum Individual Load<\/th>\n<\/tr>\n \n A<\/td>\n 20 kg<\/td>\n 15 kg<\/td>\n<\/tr>\n \n B<\/td>\n 15 kg<\/td>\n 10 kg<\/td>\n<\/tr>\n \n C<\/td>\n 15 kg<\/td>\n 10 kg<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n 7. Water Absorption<\/h3>\n
Load-Bearing Capacity Test<\/h2>\n
\n
Three-Shift Production<\/h3>\n
Water Absorption Test<\/h2>\n
\n
BIS Testing Equipment<\/h2>\n
For Length, Width and Thickness<\/h3>\n
\n
For Load-Bearing Capacity<\/h3>\n
\n
For Water Absorption<\/h3>\n
\n
Laboratory Requirements<\/h2>\n
\n
External Laboratory Testing<\/h2>\n
\n
Control Unit for Asbestos Cement Building Boards<\/h2>\n
\n
Scheme of Inspection and Testing<\/h2>\n
Composition<\/h3>\n
\n
Colouring Matter<\/h3>\n
\n
Dimensions and Thickness<\/h3>\n
\n
Appearance and Finish<\/h3>\n
\n
Load-Bearing Capacity<\/h3>\n
\n
Water Absorption<\/h3>\n
\n
Marking Requirements<\/h2>\n
\n
Warning and Safe Handling<\/h2>\n
Packaging<\/h2>\n
\n
Manufacturing Controls<\/h2>\n
Raw Materials<\/h3>\n
\n
Mixing<\/h3>\n
Board Formation<\/h3>\n
Curing<\/h3>\n
Trimming<\/h3>\n
Final Inspection<\/h3>\n
\n
Factory Inspection for BIS Certification<\/h2>\n
Raw Material Area<\/h3>\n
\n
Production Area<\/h3>\n
\n
Testing Laboratory<\/h3>\n
\n
Quality Control<\/h3>\n
\n
BIS Certification Process for Asbestos Cement Building Boards<\/h2>\n
Documents Required for BIS Certification<\/h2>\n
\n
Current BIS Testing Charges for IS 2098:1997<\/h2>\n
Cost of BIS Certification<\/h2>\n
\n
How Long Does BIS Certification Take?<\/h2>\n
\n
Common Reasons for BIS Certification Delays<\/h2>\n
Incorrect Class Selection<\/h3>\n
Incorrect Thickness Scope<\/h3>\n
Wrong Sample Selection<\/h3>\n
Load-Bearing Failure<\/h3>\n
Water Absorption Failure<\/h3>\n
Thickness Variation<\/h3>\n
Dimensional Non-Conformity<\/h3>\n
Poor Surface Finish<\/h3>\n
Missing Calibration<\/h3>\n
Incomplete Test Records<\/h3>\n
Incorrect Marking<\/h3>\n
Who Needs BIS Certification for Asbestos Cement Building Boards?<\/h2>\n
\n
Benefits of BIS Certification<\/h2>\n
Regulatory Compliance<\/h3>\n
Product Quality<\/h3>\n
Consistency<\/h3>\n
Buyer Confidence<\/h3>\n
Government and Institutional Supply<\/h3>\n
Documented Quality Control<\/h3>\n
BIS Certification Consultancy by Qualitance India<\/h2>\n
Product & Standard Identification<\/h3>\n
Class & Thickness Assessment<\/h3>\n
\n
Grouping Guidance<\/h3>\n
Sample Planning<\/h3>\n
Testing Coordination<\/h3>\n
\n
Documentation Support<\/h3>\n
Factory Preparation<\/h3>\n
BIS Application Filing<\/h3>\n
Factory Inspection Assistance<\/h3>\n
Query & Compliance Support<\/h3>\n
Licence Processing<\/h3>\n
Post-Licence Compliance<\/h3>\n
Quick BIS Certification Checklist<\/h2>\n
\n\u2611 Product class identified
\n\u2611 Thickness finalized
\n\u2611 Grouping reviewed
\n\u2611 Cement\/material requirements checked
\n\u2611 Raw-material records available
\n\u2611 Manufacturing machinery available
\n\u2611 Testing equipment available
\n\u2611 Calibration records available
\n\u2611 Load-bearing test facility available
\n\u2611 Water absorption test facility available
\n\u2611 2 representative boards prepared
\n\u2611 Testing completed
\n\u2611 Test reports reviewed
\n\u2611 Control-unit procedure established
\n\u2611 Quality-control records maintained
\n\u2611 Marking requirements reviewed
\n\u2611 Warning\/safety requirements addressed
\n\u2611 Factory ready for inspection
\n\u2611 BIS documentation prepared<\/p>\nFrequently Asked Questions<\/h2>\n
1. What is IS 2098:1997?<\/h3>\n
2. Is BIS certification mandatory for Asbestos Cement Building Boards?<\/h3>\n
3. Which BIS scheme applies?<\/h3>\n
4. What is the current Product Manual?<\/h3>\n
5. What classes are covered?<\/h3>\n
6. What is the thickness for Class A?<\/h3>\n
7. What is the thickness for Class B?<\/h3>\n
8. What is the thickness for Class C?<\/h3>\n
9. What are the standard lengths?<\/h3>\n
10. What is the standard width?<\/h3>\n
11. What is the minimum average load for Class A?<\/h3>\n
12. What is the minimum individual load for Class A?<\/h3>\n
13. What is the minimum average load for Class B?<\/h3>\n
14. What is the minimum individual load for Class B?<\/h3>\n
15. What is the minimum average load for Class C?<\/h3>\n
16. What is the minimum individual load for Class C?<\/h3>\n
17. What is the sample size for BIS certification?<\/h3>\n
18. Is product grouping available?<\/h3>\n
19. Can Class A testing cover Classes B and C?<\/h3>\n
20. Can Class B testing cover Class C?<\/h3>\n
21. Can other dimensions be supplied?<\/h3>\n
22. What are the main tests?<\/h3>\n
23. How frequently are dimensions checked?<\/h3>\n
24. How frequently is general appearance checked?<\/h3>\n
25. How frequently is the load-bearing test performed?<\/h3>\n
26. How frequently is water absorption tested?<\/h3>\n
27. What is the control unit?<\/h3>\n
28. Is an in-house laboratory required?<\/h3>\n
29. Can testing be outsourced?<\/h3>\n
30. What equipment is required for load-bearing testing?<\/h3>\n
31. What equipment is required for water absorption testing?<\/h3>\n
32. Is calibration required?<\/h3>\n
33. Are test records required?<\/h3>\n
34. Is BIS Standard Marking required?<\/h3>\n
35. Are there asbestos-related warnings?<\/h3>\n
36. Does BIS certification make asbestos safe to handle without precautions?<\/h3>\n
37. What is the current QCO?<\/h3>\n
38. When did the QCO become effective?<\/h3>\n
39. Does the QCO apply to exports?<\/h3>\n
40. Are there current 2026 exemption orders?<\/h3>\n
41. What is the current BIS testing cost?<\/h3>\n
42. Is the testing cost fixed?<\/h3>\n
43. Can one sample cover multiple thicknesses?<\/h3>\n
44. Can one sample cover Classes A, B and C?<\/h3>\n
45. What happens if dimensional testing fails?<\/h3>\n
46. What happens if load-bearing testing fails?<\/h3>\n
47. Can a manufacturer produce boards in non-standard dimensions?<\/h3>\n
48. Is factory inspection required?<\/h3>\n
49. Who can apply for BIS certification?<\/h3>\n
50. Can Qualitance India help with IS 2098:1997 certification?<\/h3>\n
Related BIS Certification Services<\/h2>\n
\n
Related Standards<\/h2>\n
\n
Why Choose Qualitance India?<\/h2>\n
Product Assessment<\/h3>\n
Scope Planning<\/h3>\n
Grouping Guidance<\/h3>\n
Testing Coordination<\/h3>\n
Documentation Support<\/h3>\n
Factory Preparation<\/h3>\n
BIS Application Filing<\/h3>\n
Factory Inspection Assistance<\/h3>\n
Query & Compliance Support<\/h3>\n
Licence Processing<\/h3>\n
Post-Licence Compliance<\/h3>\n
Contact Qualitance India<\/h2>\n
\nEmail:<\/strong> info@qualitanceindia.com<\/a>
\nWebsite:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\nConclusion<\/h2>\n