{"id":4294,"date":"2026-10-27T10:40:47","date_gmt":"2026-10-27T10:40:47","guid":{"rendered":"https:\/\/qualitanceindia.com\/?p=4294"},"modified":"2026-10-27T10:40:47","modified_gmt":"2026-10-27T10:40:47","slug":"bis-certification-for-non-ferrous-metal-butt-hinges-is-2051992-qualitance-india","status":"publish","type":"post","link":"https:\/\/qualitanceindia.com\/bis-certification-for-non-ferrous-metal-butt-hinges-is-2051992-qualitance-india\/","title":{"rendered":"BIS Certification for Non-Ferrous Metal Butt Hinges | IS 205:1992 – Qualitance India"},"content":{"rendered":"

Introduction: BIS Certification for Non-Ferrous Metal Butt Hinges<\/h2>\n

Non-ferrous metal butt hinges are widely used in doors, cabinets, furniture and other building hardware applications. These hinges are manufactured using materials such as aluminium alloys and brass, offering a combination of mechanical functionality, appearance and corrosion resistance.<\/p>\n

For manufacturers supplying non-ferrous metal butt hinges in India, compliance with the applicable Indian Standard and BIS certification requirements is an important part of product regulatory compliance.<\/p>\n

The relevant Indian Standard is IS 205:1992 \u2014 Non-Ferrous Metal Butt Hinges (Fourth Revision)<\/strong>. The standard specifies requirements for different types of non-ferrous metal butt hinges, including extruded aluminium alloy and brass hinges. BIS has also published a product manual explaining the certification-related sampling, testing equipment, grouping and inspection requirements for this product. <Cite refs={[“turn427224search34″,”turn427224search35”]}\/><\/p>\n

Importantly, non-ferrous metal butt hinges are included in the Hinges Quality Control Order<\/strong>, making BIS certification a regulatory requirement for products covered by the order, subject to the applicable exemptions and subsequent notifications. <Cite refs={[“turn885056view1″,”turn427224search3”]}\/><\/p>\n

Qualitance India provides consultancy support for BIS ISI Mark certification, documentation, testing coordination, factory-readiness assessment and product compliance.<\/p>\n

1. What Is IS 205:1992?<\/h2>\n

IS 205:1992 is the Indian Standard titled Non-Ferrous Metal Butt Hinges \u2014 Specification<\/em>. It is the fourth revision of the standard and covers non-ferrous metal butt hinges manufactured using specified materials and designs. <Cite refs={[“turn427224search34″,”turn427224search35”]}\/><\/p>\n

A butt hinge generally consists of two leaves or flaps connected by a hinge pin. It allows a door, cabinet shutter or similar component to rotate relative to its frame.<\/p>\n

The standard addresses relevant product characteristics, including:<\/p>\n

    \n
  • Material requirements.<\/li>\n
  • Hinge type and designation.<\/li>\n
  • Dimensions and dimensional tolerances.<\/li>\n
  • Manufacturing requirements.<\/li>\n
  • Workmanship and finish.<\/li>\n
  • Applicable surface-finish requirements.<\/li>\n<\/ul>\n

    The manufacturer’s product range must be assessed against the applicable standard and its current amendments before applying for a BIS licence.<\/p>\n

    2. Types of Non-Ferrous Metal Butt Hinges Covered Under IS 205<\/h2>\n

    The BIS product manual identifies four principal hinge types under IS 205:1992. <Cite refs={[“turn885056view2″]}\/><\/p>\n

    <box gap={3}>
    \n<row align=start gap={3}>
    \n<AsyncImage query=”extruded aluminium alloy butt hinges hardware flat leaf tapered leaf” aspectRatio=”4:3″ width=”112px” \/>
    \n<box flex=”1″ gap={1}>
    \n**Extruded aluminium alloy butt hinges**<\/p>\n

      These hinges are manufactured from specified aluminium alloy material. The standard includes flat-flap and tapered-flap designs.\r\n<\/box><\/code><\/pre>\n
    <\/row>
    \n<divider color=”subtle” \/>
    \n<row align=start gap={3}>
    \n<AsyncImage query=”extruded brass butt hinges polished brass door hardware” aspectRatio=”4:3″ width=”112px” \/>
    \n<box flex=”1″ gap={1}>
    \n**Extruded brass butt hinges**<\/p>\n
      These hinges use specified brass material and may have flat or tapered flaps according to the standard's classification.\r\n<\/box><\/code><\/pre>\n
    <\/row>
    \n<divider color=”subtle” \/>
    \n<row align=start gap={3}>
    \n<AsyncImage query=”cast brass butt hinge traditional brass door hinge hardware” aspectRatio=”4:3″ width=”112px” \/>
    \n<box flex=”1″ gap={1}>
    \n**Cast brass butt hinges**<\/p>\n
      These hinges are produced using casting and must meet the relevant material, dimensional and manufacturing requirements.\r\n<\/box><\/code><\/pre>\n
    <\/row>
    \n<divider color=”subtle” \/>
    \n<row align=start gap={3}>
    \n<AsyncImage query=”sheet brass cabinet butt hinge cranked leaf uncranked leaf” aspectRatio=”4:3″ width=”112px” \/>
    \n<box flex=”1″ gap={1}>
    \n**Sheet brass butt hinges**<\/p>\n
      These hinges are manufactured from sheet brass and include cranked and uncranked flap designs used for cabinet applications.\r\n<\/box><\/code><\/pre>\n
    <\/row>
    \n<\/box><\/p>\n
    The precise product designation, size and proposed licence scope should be established using the relevant tables in IS 205:1992 and its current amendments.<\/p>\n
    3. Is BIS Certification Mandatory for Non-Ferrous Metal Butt Hinges?<\/h2>\n
    Yes. BIS certification is required for non-ferrous metal butt hinges covered by the Hinges Quality Control Order, subject to the applicable exemptions and current government notifications.<\/strong><\/p>\n
    The Ministry of Commerce and Industry notified the Hinges (Quality Control) Order, 2023 through S.O. 5294(E), dated 8 December 2023. The order lists non-ferrous metal butt hinges against IS 205:1992 and requires covered products to conform to the relevant Indian Standard and bear the Standard Mark under a BIS licence in accordance with Scheme-I. <Cite refs={[“turn885056view1”]}\/><\/p>\n
    The original order provided implementation periods for general, small and micro enterprises. Subsequent amendments and notifications have also been issued for the hinges category. The BIS Scheme-I listing records the Hinges QCO 2023, QCO 2024, QCO 2025 and the Transition Facilitation (Quality Control) Order, 2026. <Cite refs={[“turn427224search1″,”turn516831search0”]}\/><\/p>\n
    Therefore, manufacturers should check the latest applicable QCO, amendments, transition provisions and exemptions before making a decision about a particular manufacturing or supply arrangement.<\/p>\n
    Important points for manufacturers<\/h3>\n
      \n
    • A valid BIS licence is required where the product falls within the applicable compulsory certification requirements.<\/li>\n
    • The product must comply with IS 205:1992, including applicable amendments.<\/li>\n
    • The licence scope must cover the relevant hinge types and designations.<\/li>\n
    • Products must be marked in accordance with BIS licence conditions.<\/li>\n
    • The original QCO provides an exemption for goods manufactured domestically for export; confirm the exact conditions and current legal position before relying on an exemption. <Cite refs={[“turn885056view1”]}\/><\/li>\n<\/ul>\n
      The existence of an Indian Standard alone does not make certification compulsory; in this case, the applicable QCO is the key regulatory instrument.<\/p>\n
      4. Latest Amendment to IS 205:1992<\/h2>\n
      BIS issued implementation guidelines on 22 July 2025 for Amendment No. 3 to IS 205:1992. The circular specified 22 November 2025<\/strong> as the last date for implementation of that amendment. <Cite refs={[“turn885056view0”]}\/><\/p>\n
      The principal changes identified in the BIS circular include:<\/p>\n
        \n
      • Addition of aluminium alloy material designation 63400WP<\/strong>, alongside existing designations 64430WP and 65032WP.<\/li>\n
      • Addition of hinge designation 150B22<\/strong> for extruded aluminium alloy butt hinges.<\/li>\n
      • Revision of the specified aluminium alloy hinge finish requirement from AC10 to AC5 under IS 1868. The circular states that a finish conforming to AC10 also conforms to AC5. <Cite refs={[“turn885056view0”]}\/><\/li>\n<\/ul>\n
        For the new aluminium alloy designation, the circular indicates that a test certificate is required where the manufacturer uses material designation 63400WP. If a manufacturer wants to add designation 150B22 to an existing licence scope, the circular directs that the applicable Change in Scope of Licence (CSoL) procedure be followed. <Cite refs={[“turn885056view0”]}\/><\/p>\n
        Practical recommendation:<\/strong> Manufacturers should work with the current revised product manual, rather than relying solely on the May 2020 product manual, which predates Amendment No. 3.<\/p>\n
        5. BIS Product Manual for IS 205:1992<\/h2>\n
        BIS published the product manual PM\/IS 205\/1\/May 2020<\/em> for non-ferrous metal butt hinges. BIS subsequently stated that the product manual was revised in July 2025 as PM\/IS 205\/2\/July 2025<\/strong> to incorporate Amendment No. 3 and update the document format. <Cite refs={[“turn885056view2″,”turn885056view0”]}\/><\/p>\n
        The older manual remains useful for understanding the general structure of the certification process, but the latest applicable product manual and amendment must be used for a current application.<\/p>\n
        Product grouping<\/h3>\n
        The May 2020 manual groups the product according to:<\/p>\n
          \n
        • Hinge type.<\/li>\n
        • Hinge size, as defined in the relevant standard tables.<\/li>\n<\/ul>\n
          It indicates that samples representing the minimum and maximum hinge lengths for each type should be tested to support coverage of the relevant size range. The manufacturer must declare the varieties intended to be covered by the licence. BIS may restrict the scope according to manufacturing and testing capabilities. <Cite refs={[“turn885056view2”]}\/><\/p>\n
          The final grouping and scope must be confirmed against the revised July 2025 manual and current BIS instructions.<\/p>\n
          6. Sample Size and Product Testing Requirements<\/h2>\n
          The May 2020 BIS product manual specifies the following historical sample quantities for IS 205:1992. These figures should be confirmed against the current July 2025 manual before samples are prepared. <Cite refs={[“turn885056view2″,”turn885056view0”]}\/><\/p>\n\n\n\n\n\n
          Testing purpose<\/th>\nSample quantity in the May 2020 manual<\/th>\n<\/tr>\n
          Mechanical and product assessment tests<\/td>\n6 hinges<\/td>\n<\/tr>\n
          Chemical testing<\/td>\n5 pieces of material, each approximately 5 cm \u00d7 5 cm, or approximately 50 g of drillings<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
          The actual sample selection depends on the type of hinge, material, size range and proposed scope of certification.<\/p>\n
          Tests and inspections<\/h3>\n
          The older product manual identifies the following test areas:<\/p>\n
          Dimensions and tolerances:<\/strong> The hinge dimensions must conform to the relevant requirements in IS 205:1992.<\/p>\n
          Manufacture:<\/strong> The hinge must meet the applicable manufacturing and construction requirements.<\/p>\n
          Workmanship and finish:<\/strong> The product must comply with the applicable workmanship and surface-finish requirements.<\/p>\n
          Material requirements:<\/strong> The material used for the hinge leaves and associated components must meet the applicable material specification.<\/p>\n
          Anodized finish:<\/strong> For aluminium alloy hinges, the specified anodized finish must meet the applicable requirements. The current amendment and revised manual must be followed for the relevant finish grade. <Cite refs={[“turn885056view2″,”turn885056view0”]}\/><\/p>\n
          Testing should be performed using the methods and acceptance criteria specified in the current standard and applicable BIS certification documents.<\/p>\n
          7. Factory, Machinery and In-House Laboratory Requirements<\/h2>\n
          A manufacturer applying for BIS certification should demonstrate that the factory can consistently produce hinges meeting the applicable standard.<\/p>\n
          The May 2020 product manual provides an indicative list of testing equipment and inspection requirements. Because the product manual was revised in July 2025, the current equipment list should be confirmed before purchasing or installing equipment. <Cite refs={[“turn885056view2″,”turn885056view0”]}\/><\/p>\n
          Indicative testing equipment<\/h3>\n
          The older manual identifies equipment including:<\/p>\n