Domestic gas stoves designed for use with Piped Natural Gas (PNG)<\/strong> are commonly used in residential kitchens and are required to meet important requirements relating to safety, gas consumption, combustion, thermal efficiency, flame stability and other performance characteristics.<\/p>\n IS 17153:2019<\/strong> specifies requirements for Domestic Gas Stoves for Use with Piped Natural Gas (PNG)<\/strong>. BIS has a product-specific manual for this standard, and certification is operated under Scheme-I of the BIS Conformity Assessment Regulations, 2018<\/strong>.<\/p>\n The Domestic Gas Stoves for Use with PNG (Quality Control) Order, 2023<\/strong> requires the covered products to conform to the relevant Indian Standard and bear the BIS Standard Mark under a BIS licence. The QCO was notified on 9 August 2023.<\/p>\n Important current update:<\/strong> IS 17153:2019 has since been revised and published as IS 17153:2025 \u2013 Domestic Gas Stove and Built-in Hob for Use with PNG<\/strong>. BIS issued implementation guidelines stating 10 May 2026<\/strong> as the last date for implementation of the revised standard. Therefore, manufacturers starting a new application now should verify the applicable current standard and transition requirements with BIS rather than relying only on the 2019 version.<\/p>\n Domestic PNG gas stoves are cooking appliances designed to operate using Piped Natural Gas<\/strong> supplied through a pipeline network.<\/p>\n These stoves may be available in different configurations, such as:<\/p>\n BIS’s published first-licence information for IS 17153:2019 demonstrates that the standard was used for multiple burner configurations and both stainless-steel and toughened-glass-top designs.<\/p>\n IS 17153:2019<\/strong> is the Indian Standard for:<\/p>\n Domestic Gas Stoves for Use with Piped Natural Gas (PNG)<\/strong><\/p>\n The standard provides technical requirements intended to ensure safe and satisfactory performance of domestic PNG gas stoves.<\/p>\n The BIS Product Manual identifies IS 17153:2019 as a product covered under Scheme-I<\/strong> and provides requirements for raw materials, product grouping, sample size, testing equipment, Scheme of Inspection and Testing and licence scope.<\/p>\n Manufacturers should pay particular attention to the recent revision.<\/p>\n BIS issued implementation guidelines on 24 February 2026<\/strong> stating that:<\/p>\n IS 17153:2019 has been revised and published as IS 17153:2025.<\/strong><\/p>\n The revised standard is titled:<\/p>\n Domestic Gas Stove and Built-in Hob for Use with PNG<\/strong><\/p>\n BIS specified 10 May 2026<\/strong> as the last date for implementation of the revised standard. The revision also enlarged the scope to cover certain designs involving a metallic or plastic frame with a glass top.<\/p>\n Therefore, if you are preparing a new BIS application today, the applicable version should be confirmed based on the latest BIS implementation requirements.<\/p>\n Under the 2019 standard, the product category covers domestic gas stoves designed for use with Piped Natural Gas (PNG)<\/strong>.<\/p>\n The certification scope can vary depending on:<\/p>\n The BIS Product Manual states that each type of domestic gas stove for use with PNG shall be tested for GOL\/CSoL<\/strong> under the applicable grouping guidance.<\/p>\n Depending on the applicable standard and approved licence scope, products can include:<\/p>\n Domestic stove with one burner designed for PNG.<\/p>\n Two-burner domestic PNG stove.<\/p>\n Three-burner configuration for domestic cooking.<\/p>\n Four-burner domestic PNG cooking appliance.<\/p>\n Five-burner configuration.<\/p>\n Gas stoves manufactured using stainless-steel body construction.<\/p>\n Gas stoves incorporating a glass cooking surface, subject to the applicable requirements.<\/p>\n BIS laboratory information for IS 17153:2019 identifies several important tests and characteristics, including gas connections, flame visibility, gas taps, flame-failure devices, accidental overheating, gas soundness, water soundness, thermal efficiency, combustion-related parameters, gas consumption, ignition and flame travel, flame stability, noise, flash-back and fire hazards.<\/p>\n The gas-carrying system must be suitably checked to ensure that the appliance does not have unacceptable gas leakage.<\/p>\n The relevant components and construction are assessed for water soundness as specified by the standard.<\/p>\n Thermal efficiency is an important performance characteristic for domestic gas stoves.<\/p>\n Gas consumption is measured to verify that the appliance operates within the applicable requirements.<\/p>\n The flame should remain stable during the specified operating conditions.<\/p>\n Where applicable, the flame-failure arrangement is evaluated as part of the safety requirements.<\/p>\n The ignition system and flame travel are assessed under the relevant test conditions.<\/p>\n The appliance is evaluated against flash-back conditions.<\/p>\n Combustion performance includes assessment of carbon monoxide\/carbon dioxide parameters under the applicable test conditions.<\/p>\n The appliance is evaluated for fire hazards and temperature-related safety requirements.<\/p>\n Noise generated during operation is also addressed by the test programme.<\/p>\n The BIS Product Manual states that materials and components are to comply with the requirements specified under Clause 5 of IS 17153:2019<\/strong>.<\/p>\n Depending on the construction, manufacturers may use components such as:<\/p>\n The exact requirements should be checked against the applicable current standard.<\/p>\n A typical manufacturing process for a domestic PNG gas stove may include:<\/p>\n Materials and components are sourced according to approved specifications.<\/p>\n Raw materials and purchased components are checked.<\/p>\n The stove body is fabricated, formed or assembled.<\/p>\n Where applicable, the glass top is prepared according to the product design.<\/p>\n Burners and associated components are assembled.<\/p>\n Gas taps, injectors, connections and other gas-carrying components are installed.<\/p>\n The ignition mechanism is installed where provided.<\/p>\n Where applicable, the flame-failure device is installed.<\/p>\n All components are assembled into the completed stove.<\/p>\n The finished stove is inspected for appearance, construction and functionality.<\/p>\n Representative products undergo the required tests.<\/p>\n The finished products are packed and labelled according to applicable requirements.<\/p>\n Testing is one of the most important stages of BIS certification.<\/p>\n The BIS laboratory scope for IS 17153:2019 includes tests such as:<\/p>\n \n The exact testing programme should be confirmed against the applicable standard version and product configuration.<\/p>\n BIS LIMS currently lists IS 17153:2019<\/strong> laboratory testing scopes.<\/p>\n One BIS laboratory listing shows a total listed charge of \u20b928,000 excluding taxes<\/strong> for the specified scope, with individual test charges shown separately. Another BIS laboratory listing provides different charges based on stove configuration.<\/p>\n For example, one listed laboratory gives configuration-specific charges for the burner test, with different amounts for:<\/p>\n \n These figures should not be treated as a fixed certification cost because laboratory charges, applicable standards and test scopes can change.<\/p>\n Product grouping is particularly important for PNG gas stoves.<\/p>\n The BIS Product Manual for IS 17153:2019 states that:<\/p>\n Each type of Domestic Gas Stove for use with PNG shall be tested for GOL\/CSoL.<\/strong><\/p>\n Manufacturers should therefore carefully identify their:<\/p>\n before finalising the BIS licence scope.<\/p>\n The BIS Product Manual specifies:<\/p>\n Sample Size: One Gas Stove with additional components.<\/strong><\/p>\n It also specifies no separate product sampling guideline in the manual.<\/p>\n The actual sample submitted should represent the product configuration for which certification is being sought.<\/p>\n The BIS Product Manual directs applicants to Annex A<\/strong> for the list of testing equipment applicable to IS 17153:2019.<\/p>\n Depending on the applicable testing requirements, suitable arrangements may be required for checking:<\/p>\n Testing and measuring equipment should be appropriately maintained and calibrated.<\/p>\n During BIS factory assessment, the manufacturing unit may be reviewed for:<\/p>\n Verification of incoming material and component quality.<\/p>\n Inspection of relevant fabrication, assembly and finishing machinery.<\/p>\n Review of the complete manufacturing process.<\/p>\n Verification of gas taps, burners, injectors and gas-carrying components.<\/p>\n Assessment of required in-house testing arrangements.<\/p>\n Checking applicable calibration records.<\/p>\n Review of incoming, in-process and finished-product inspection.<\/p>\n Verification of production and batch records.<\/p>\n Checking product labels, packaging and applicable BIS marking arrangements.<\/p>\n Common documents may include:<\/p>\n The exact documents depend on the product and current BIS application requirements.<\/p>\n The Domestic Gas Stoves for Use with Piped Natural Gas (PNG) Quality Control Order, 2023<\/strong> covers:<\/p>\n Domestic Gas Stoves for use with Piped Natural Gas (PNG)<\/strong><\/p>\n against:<\/p>\n IS 17153:2019<\/strong><\/p>\n The QCO requires covered goods to conform to the relevant Indian Standard and bear the Standard Mark under a BIS licence. It also states that the latest version of the Indian Standard, including amendments notified by BIS, applies from the relevant date of notification.<\/p>\n BIS’s current compulsory-certification listing also includes this product category under IS 17153:2019 and references the 2023 QCO.<\/p>\n Because BIS has subsequently revised IS 17153 to IS 17153:2025<\/strong>, manufacturers should verify the current transition requirements before applying. BIS’s February 2026 implementation guideline specified 10 May 2026<\/strong> as the last date for implementation of the revised standard.<\/p>\n BIS certification requirements can apply to manufacturers producing domestic PNG gas stoves covered under the applicable standard and QCO.<\/p>\n This may include:<\/p>\n Importers and overseas manufacturers should separately verify the applicable BIS requirements for their products.<\/p>\n A manufacturer should generally have:<\/p>\n Some common issues include:<\/p>\n After successful grant of the BIS licence, the manufacturer can use the applicable BIS Standard Mark and licence number (CM\/L)<\/strong> according to the certification conditions.<\/p>\n The mark should only be used on products covered under the approved licence scope and in the manner specified by BIS.<\/p>\n BIS has published All India First Licence information for domestic PNG gas stoves under IS 17153:2019, demonstrating implementation of the certification scheme for this product.<\/p>\n The total cost depends on several factors:<\/p>\n Laboratory testing costs can vary substantially depending on the stove configuration and testing scope. Current BIS LIMS listings show different charges for different burner and body\/glass-top configurations.<\/p>\n Therefore, a manufacturer should obtain the current test quotation after finalising the product configuration.<\/p>\n The certification timeline depends on:<\/p>\n For new applications, checking the current standard version before testing is particularly important because BIS has already issued implementation guidelines for IS 17153:2025.<\/p>\n Testing helps verify important gas-appliance safety characteristics.<\/p>\n Helps manufacturers meet applicable BIS and QCO requirements.<\/p>\n BIS certification can increase confidence among distributors and customers.<\/p>\n Certification supports supply where BIS certification is mandatory.<\/p>\n Testing evaluates important performance characteristics such as gas consumption, thermal efficiency and flame stability.<\/p>\n Quality-control requirements help maintain consistency between production batches.<\/p>\n A BIS-certified product can strengthen the manufacturer’s credibility in the Indian market.<\/p>\n Qualitance India<\/strong> provides BIS certification consultancy for gas appliances and products covered under Indian Standards.<\/p>\n For Domestic Gas Stoves for Use with PNG<\/strong>, assistance can include:<\/p>\n Qualitance India<\/strong><\/p>\n Phone:<\/strong> +91-9310-615-170 Product Identification<\/strong> IS 17153:2019 is the Indian Standard for Domestic Gas Stoves for Use with Piped Natural Gas (PNG)<\/strong>.<\/p>\n Domestic Gas Stoves for Use with PNG are covered by the 2023 QCO requiring conformity to the applicable Indian Standard and BIS licensing.<\/p>\n The original standard is IS 17153:2019<\/strong>. BIS subsequently revised it to IS 17153:2025<\/strong>.<\/p>\n BIS published IS 17153:2025 \u2013 Domestic Gas Stove and Built-in Hob for Use with PNG<\/strong> as the revised standard.<\/p>\n BIS’s implementation guideline specified 10 May 2026<\/strong> as the last date for implementation of the revised standard.<\/p>\n Testing can include gas soundness, water soundness, thermal efficiency, gas consumption, combustion, flame stability, flash-back, ignition, temperature rise and other applicable safety tests.<\/p>\n Yes. Thermal efficiency is specifically included in the BIS laboratory scope for IS 17153:2019.<\/p>\n Yes. Gas soundness is one of the listed test requirements.<\/p>\n Yes. Gas consumption is included among the applicable performance tests.<\/p>\n Yes. Flame stability is included in the laboratory test scope.<\/p>\n Combustion-related carbon monoxide\/carbon dioxide requirements are included in the BIS laboratory scope.<\/p>\n Glass-top configurations have been included in BIS certification examples, and the 2025 revision further enlarged the scope concerning metallic or plastic frames with glass tops.<\/p>\n Yes, BIS’s published licence information includes single-burner PNG gas stove configurations.<\/p>\n Yes, five-burner configurations are included in the applicable laboratory information for IS 17153:2019.<\/p>\n The Product Manual for IS 17153:2019 specifies one gas stove with additional components<\/strong>.<\/p>\n Yes. The Product Manual provides specific grouping requirements and states that each type is to be tested for GOL\/CSoL.<\/p>\n Documents generally include factory details, product specifications, drawings, manufacturing process, machinery details, raw-material information, testing documents, calibration records and quality-control records.<\/p>\n BIS LIMS currently lists different charges depending on the applicable test scope and stove configuration. One listed scope shows \u20b928,000 excluding taxes, while another laboratory provides configuration-specific charges.<\/p>\n Factory assessment is part of the applicable BIS certification process under Scheme-I.<\/p>\n Yes. Qualitance India can assist manufacturers with standard assessment, documentation, laboratory coordination, BIS application and factory inspection preparation.<\/p>\n It is the BIS conformity assessment process for domestic gas stoves designed for use with Piped Natural Gas.<\/p>\n The original standard is IS 17153:2019<\/strong>, which has subsequently been revised to IS 17153:2025<\/strong>.<\/p>\n Domestic Gas Stoves for Use with PNG are covered by the Domestic Gas Stoves for Use with PNG QCO, 2023.<\/p>\n Tests include gas soundness, thermal efficiency, gas consumption, combustion, flame stability, ignition, flash-back, temperature-related safety and other applicable requirements.<\/p>\n Yes, glass-top configurations have been included in BIS certification, subject to the applicable requirements and current standard.<\/p>\n The timeline depends on testing, documentation, BIS processing, factory readiness and assessment. The transition to the revised IS 17153:2025 should also be considered.<\/p>\n The manufacturer generally needs to identify the applicable standard, prepare the product and factory, complete testing, submit the BIS application and undergo the applicable conformity-assessment process.<\/p>\n DOMESTIC GAS STOVES FOR PNG<\/strong><\/p>\n IS 17153:2019<\/strong><\/p>\n BIS CERTIFICATION CONSULTANCY<\/strong><\/p>\n PIPED NATURAL GAS (PNG)<\/strong><\/p>\n Qualitance India<\/strong><\/p>\n +91-9310-615-170<\/strong> If you manufacture Domestic Gas Stoves for Use with Piped Natural Gas<\/strong>, it is important to verify the applicable BIS standard, product configuration, testing requirements and current transition requirements.<\/p>\n Since IS 17153:2019 has been revised to IS 17153:2025<\/strong>, manufacturers should ensure that their application and testing strategy is based on the currently applicable BIS requirements.<\/p>\n Qualitance India<\/strong> can assist with:<\/p>\n Qualitance India<\/strong> Domestic Gas Stoves for Use with Piped Natural Gas (PNG)<\/strong> are subject to important safety and performance requirements under the applicable BIS framework. IS 17153:2019<\/strong> provided the original specification for these products, while BIS has subsequently published IS 17153:2025 \u2013 Domestic Gas Stove and Built-in Hob for Use with PNG<\/strong>.<\/p>\n The certification process involves assessment of the product design, gas components, manufacturing process, testing facilities, product performance and quality-control arrangements. Important testing areas include gas soundness, thermal efficiency, gas consumption, combustion, flame stability, ignition, flash-back and temperature-related safety<\/strong>.<\/p>\n The Domestic Gas Stoves for Use with PNG QCO, 2023 provides the regulatory framework for BIS certification of covered products, while the latest standard version and BIS transition instructions need to be considered for current applications.<\/p>\n For manufacturers, proper preparation of technical documents, representative samples, testing arrangements, product grouping and factory facilities<\/strong> can make the certification process more efficient.<\/p>\n Qualitance India<\/strong> provides BIS certification consultancy for domestic PNG gas stoves, including product assessment, documentation, testing coordination, application support and factory inspection preparation.<\/p>\n","protected":false},"excerpt":{"rendered":" Introduction Domestic gas stoves designed for use with Piped Natural Gas (PNG) are commonly used in residential kitchens and are required to meet important requirements relating to safety, gas consumption, combustion, thermal efficiency, flame stability and other performance characteristics. IS 17153:2019 specifies requirements for Domestic Gas Stoves for Use with Piped Natural Gas (PNG). BIS […]<\/p>\n","protected":false},"author":1,"featured_media":3491,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification Consultancy for Domestic Gas Stoves for Use with PNG | IS 17153:2019 - Qualitance India","description":"Introduction Domestic gas stoves designed for use with Piped Natural Gas (PNG) are commonly used in residential kitchens and are required to meet important requ"},"_slim_seo_primary_term_category":0,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3490","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3490","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=3490"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3490\/revisions"}],"predecessor-version":[{"id":3492,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3490\/revisions\/3492"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/3491"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=3490"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=3490"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=3490"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nAbout Domestic Gas Stoves for PNG<\/h1>\n
\n
\nWhat is IS 17153:2019?<\/h1>\n
\nCurrent Standard Update: IS 17153:2025<\/h1>\n
\nScope of IS 17153<\/h1>\n
\n
\nProducts Covered<\/h1>\n
Single Burner PNG Gas Stove<\/h3>\n
Double Burner PNG Gas Stove<\/h3>\n
Three Burner PNG Gas Stove<\/h3>\n
Four Burner PNG Gas Stove<\/h3>\n
Five Burner PNG Gas Stove<\/h3>\n
Stainless Steel Body Gas Stove<\/h3>\n
Glass Top Gas Stove<\/h3>\n
\nMain Safety and Performance Requirements<\/h1>\n
Gas Soundness<\/h2>\n
Water Soundness<\/h2>\n
Thermal Efficiency<\/h2>\n
Gas Consumption<\/h2>\n
Flame Stability<\/h2>\n
Flame Failure Device<\/h2>\n
Ignition and Flame Travel<\/h2>\n
Flash-Back<\/h2>\n
Carbon Monoxide and Carbon Dioxide<\/h2>\n
Fire Hazards and Limiting Temperatures<\/h2>\n
Noise<\/h2>\n
\nRaw Material and Components<\/h1>\n
\n
\nManufacturing Process<\/h1>\n
1. Raw Material Procurement<\/h3>\n
2. Incoming Inspection<\/h3>\n
3. Body Manufacturing<\/h3>\n
4. Glass Top Processing<\/h3>\n
5. Burner Assembly<\/h3>\n
6. Gas Train Assembly<\/h3>\n
7. Ignition System<\/h3>\n
8. Flame-Failure System<\/h3>\n
9. Final Assembly<\/h3>\n
10. Inspection<\/h3>\n
11. Performance Testing<\/h3>\n
12. Packing<\/h3>\n
\nTesting Requirements<\/h1>\n
\n
\nLaboratory Testing Cost<\/h1>\n
\n
\nProduct Grouping<\/h1>\n
\n
\nSample Requirement<\/h1>\n
\nTesting Equipment<\/h1>\n
\n
\nFactory Inspection<\/h1>\n
Raw Material Control<\/h3>\n
Manufacturing Machinery<\/h3>\n
Production Process<\/h3>\n
Gas Components<\/h3>\n
Testing Facilities<\/h3>\n
Calibration<\/h3>\n
Quality Control<\/h3>\n
Production Records<\/h3>\n
Packing and Marking<\/h3>\n
\nDocuments Required<\/h1>\n
\n
\nQCO Requirement<\/h1>\n
\nWho Needs BIS Certification?<\/h1>\n
\n
\nEligibility Requirements<\/h1>\n
\n
\nCommon Reasons for Certification Delays<\/h1>\n
\n
\nBIS Standard Mark<\/h1>\n
\nCost of BIS Certification<\/h1>\n
\n
\nCertification Timeline<\/h1>\n
\n
\nBenefits of BIS Certification<\/h1>\n
Safety<\/h3>\n
Regulatory Compliance<\/h3>\n
Customer Confidence<\/h3>\n
Market Acceptance<\/h3>\n
Product Reliability<\/h3>\n
Better Manufacturing Control<\/h3>\n
Business Credibility<\/h3>\n
\nWhy Choose Qualitance India?<\/h1>\n
\n
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
\nBIS Certification Process<\/h1>\n
\u2193
Applicable IS Standard Review<\/strong>
\u2193
IS 17153 Product Requirement Assessment<\/strong>
\u2193
Product Configuration & Grouping Review<\/strong>
\u2193
Raw Material & Component Assessment<\/strong>
\u2193
Testing Requirement Review<\/strong>
\u2193
Sample Preparation<\/strong>
\u2193
Laboratory Testing<\/strong>
\u2193
Technical Documentation<\/strong>
\u2193
BIS Application<\/strong>
\u2193
BIS Scrutiny<\/strong>
\u2193
Factory Assessment<\/strong>
\u2193
Test Report Evaluation<\/strong>
\u2193
Observation Closure<\/strong>
\u2193
BIS Licence Grant<\/strong>
\u2193
BIS Standard Mark<\/strong><\/p>\n
\nFrequently Asked Questions<\/h1>\n
1. What is IS 17153:2019?<\/h3>\n
2. Is BIS certification required for PNG gas stoves?<\/h3>\n
3. What is the BIS standard for PNG gas stoves?<\/h3>\n
4. What is the latest standard for PNG gas stoves?<\/h3>\n
5. What was the implementation date for IS 17153:2025?<\/h3>\n
6. What tests are conducted for PNG gas stoves?<\/h3>\n
7. Is thermal efficiency tested?<\/h3>\n
8. Is gas leakage tested?<\/h3>\n
9. Is gas consumption tested?<\/h3>\n
10. Is flame stability tested?<\/h3>\n
11. Is carbon monoxide tested?<\/h3>\n
12. Are glass-top PNG gas stoves covered?<\/h3>\n
13. Can single-burner gas stoves be certified?<\/h3>\n
14. Can five-burner gas stoves be certified?<\/h3>\n
15. What is the sample size?<\/h3>\n
16. Is product grouping applicable?<\/h3>\n
17. What documents are needed?<\/h3>\n
18. How much does laboratory testing cost?<\/h3>\n
19. Is factory inspection required?<\/h3>\n
20. Can Qualitance India help with BIS certification for PNG gas stoves?<\/h3>\n
\nPeople Also Ask<\/h1>\n
What is BIS certification for PNG gas stoves?<\/h3>\n
What is the BIS code for PNG gas stove?<\/h3>\n
Is IS 17153 mandatory?<\/h3>\n
What are the tests for PNG gas stoves?<\/h3>\n
Can a glass-top PNG stove get BIS certification?<\/h3>\n
How long does BIS certification for PNG gas stoves take?<\/h3>\n
How can a manufacturer apply for a BIS licence for PNG gas stoves?<\/h3>\n
\nWebsite Image Text<\/h1>\n
info@qualitanceindia.com<\/a><\/strong>
qualitanceindia.com<\/strong><\/p>\n
\nImage Text Suggestions<\/h1>\n
\n
\nRelated Services<\/h1>\n
\n
\nRelated Topics for Your Website<\/h1>\n
\n
\nNeed BIS Certification for Domestic PNG Gas Stoves?<\/h1>\n
\n
Phone:<\/strong> +91-9310-615-170
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
\nConclusion<\/h1>\n