BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> is a mandatory product-certification requirement for covered aluminium foil products under the applicable Indian regulatory framework. The relevant Indian Standard is IS 15392:2003 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification<\/strong>. BIS’s current compulsory-certification listing identifies IS 15392<\/strong> under the Aluminium Foil (Quality Control) Order, 2020<\/strong>.<\/p>\n The BIS Product Manual for IS 15392:2003 provides guidance on product scope, raw material, sampling, grouping, testing equipment, Scheme of Inspection and Testing, and licensing scope.<\/p>\n Manufacturers of aluminium foil intended for food packaging should therefore assess their product against the applicable requirements of IS 15392<\/strong>, prepare the required technical documentation, complete testing through the appropriate laboratory and obtain the applicable BIS licence before using the Standard Mark.<\/p>\n Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> is aluminium foil manufactured for applications involving food packaging.<\/p>\n The product can be supplied in different forms and surface conditions according to the applicable specification.<\/p>\n The BIS Product Manual identifies the licence scope in terms of parameters such as:<\/p>\n \n Aluminium foil is widely used because of its lightweight nature, formability and suitability for various packaging applications.<\/p>\n BIS Certification<\/strong> is a conformity assessment mechanism administered by the Bureau of Indian Standards (BIS)<\/strong>.<\/p>\n For products covered under compulsory certification, manufacturers must demonstrate that their products conform to the applicable Indian Standard and satisfy the relevant certification requirements.<\/p>\n For aluminium foil covered by IS 15392, BIS currently lists the product under Scheme-I \/ ISI Mark Scheme<\/strong> and identifies the applicable Aluminium Foil (Quality Control) Order, 2020<\/strong>.<\/p>\n IS 15392:2003<\/strong> is titled:<\/p>\n \u201cAluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification.\u201d<\/strong><\/p>\n The BIS Product Manual confirms IS 15392:2003 as the applicable product standard and provides certification guidance for prospective applicants and existing licensees.<\/p>\n The standard covers requirements relating to the characteristics and quality of aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n The standard covers aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n The BIS Product Manual identifies certification scope using parameters such as:<\/p>\n \n The applicable scope should be finalized according to the manufacturer’s actual product range and the current BIS requirements.<\/p>\n An important point for manufacturers is that Amendment No. 1 to IS 15392:2003<\/strong> was issued in April 2022<\/strong>.<\/p>\n The amendment changed certain thickness-related provisions, including replacing 0.075 mm (75 \u00b5m)<\/strong> with 0.100 mm (100 \u00b5m)<\/strong> in specified clauses and adding preferred thicknesses of 80 \u00b5m, 90 \u00b5m and 100 \u00b5m<\/strong> in the relevant table. It also added corresponding tensile-breaking-load values.<\/p>\n Therefore, manufacturers should ensure that their technical documents and product specifications reflect the applicable amended requirements.<\/p>\n Depending on the applicable scope, the product category can include:<\/p>\n The exact certification scope should be determined according to the product specifications and BIS grouping requirements.<\/p>\n The BIS Product Manual specifies that the raw material should conform to the chemical composition of the relevant grades:<\/p>\n of IS 737<\/strong>.<\/p>\n It also states that the material shall be supplied in fully annealed \u201cO\u201d temper<\/strong>.<\/p>\n This makes raw-material control an important part of BIS compliance.<\/p>\n Yes. IS 15392 is included in BIS’s compulsory certification framework.<\/strong><\/p>\n BIS’s current Scheme-I listing shows:<\/p>\n IS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong><\/p>\n under:<\/p>\n Aluminium Foil (Quality Control) Order, 2020 \u2013 S.O. 687(E), dated 13 February 2020.<\/strong><\/p>\n Therefore, manufacturers covered by the applicable QCO should obtain the required BIS certification before supplying the regulated product in the Indian market.<\/p>\n The applicable regulatory order is:<\/p>\n Notification:<\/strong> S.O. 687(E)<\/p>\n Date:<\/strong> 13 February 2020<\/p>\n BIS’s current compulsory-certification page identifies this QCO against IS 15392<\/strong>.<\/p>\n Manufacturers should verify the latest applicable regulatory notification and any subsequent amendments\/exemptions before relying on the compliance position for a particular product.<\/p>\n BIS certification may be required for manufacturers producing covered aluminium and aluminium alloy bare foil for food packaging, including:<\/p>\n The exact applicability depends on the product and the latest QCO provisions.<\/p>\n A manufacturer should generally have:<\/p>\n The manufacturing facility should be capable of consistently producing foil conforming to IS 15392.<\/p>\n Identify the exact aluminium foil product manufactured for food packaging.<\/p>\n Confirm applicability of:<\/p>\n IS 15392:2003<\/strong><\/p>\n including applicable amendments.<\/p>\n Identify:<\/p>\n Determine the appropriate BIS product grouping.<\/p>\n The BIS Product Manual specifically provides grouping guidance in its annex.<\/p>\n Review manufacturing machinery, quality-control systems, testing arrangements and production facilities.<\/p>\n Prepare all technical, legal and quality documents.<\/p>\n Prepare samples according to the applicable BIS sampling requirements.<\/p>\n Submit samples to the appropriate BIS-recognized\/approved testing facility as applicable.<\/p>\n Submit the certification application along with the required documents and test information.<\/p>\n BIS reviews the submitted application and documentation.<\/p>\n The factory may be assessed for manufacturing and quality-control capabilities.<\/p>\n Address any technical or documentation observations raised during the certification process.<\/p>\n After successful completion of the requirements, BIS may grant the licence.<\/p>\n The licensee may use the BIS Standard Mark according to the applicable licence conditions.<\/p>\n Maintain ongoing production, inspection and testing compliance.<\/p>\n Commonly required documents may include:<\/p>\n The exact documents depend on the applicant and product scope.<\/p>\n Testing is a critical part of IS 15392 BIS certification.<\/p>\n BIS LIMS currently lists testing facilities for IS 15392:2003<\/strong> and identifies tests relating to various clauses of the standard.<\/p>\n Testing may include:<\/p>\n The foil is evaluated for pinholes according to the applicable requirement.<\/p>\n The product is checked for specified defects.<\/p>\n Relevant aluminium alloy\/material composition requirements are evaluated.<\/p>\n Average thickness is assessed.<\/p>\n Relevant dimensional requirements such as width and length are evaluated.<\/p>\n Tensile properties may be tested according to the applicable requirements.<\/p>\n The foil surface is assessed according to the relevant requirements.<\/p>\n Applicable lubricant requirements are evaluated where relevant.<\/p>\n BIS LIMS listings show individual test activities for IS 15392, including pinhole count, freedom from defects, material, average thickness, dimensions, surface condition and tensile properties.<\/p>\n BIS LIMS currently shows laboratories with testing scope for IS 15392:2003<\/strong>.<\/p>\n For example, BIS’s Central Laboratory lists IS 15392:2003 within its scope, while the BIS Eastern Regional Laboratory also lists testing for the standard.<\/p>\n Testing charges can vary depending on:<\/p>\n BIS LIMS currently shows different test charges\/packages for IS 15392, so manufacturers should obtain the latest applicable quotation rather than relying on an old fixed cost.<\/p>\n The BIS Product Manual contains specific sampling guidance.<\/p>\n For the product manual, the sampling information includes:<\/p>\n Sample Size: 20 metre coils \u2013 3 Nos.<\/strong><\/p>\n The manual also provides grouping guidance and test-equipment requirements in its annexes.<\/p>\n The exact sampling requirement should always be checked against the applicable current BIS certification documentation.<\/p>\n Product grouping is important where a manufacturer has multiple:<\/p>\n The BIS Product Manual provides grouping guidelines under Annex A<\/strong>.<\/p>\n Proper grouping can help manufacturers avoid unnecessary testing and delays.<\/p>\n During factory assessment, the following areas may be reviewed:<\/p>\n The manufacturer should demonstrate control over aluminium\/alloy raw materials.<\/p>\n The complete foil manufacturing process should be properly controlled.<\/p>\n Relevant production processes should be maintained consistently.<\/p>\n Applicable annealing conditions should be controlled.<\/p>\n Incoming, in-process and final-product inspections should be documented.<\/p>\n Required testing arrangements should be available.<\/p>\n Measuring and testing equipment should have valid calibration records.<\/p>\n Production and testing records should be properly maintained.<\/p>\n The BIS Product Manual includes a Scheme of Inspection and Testing (SIT)<\/strong> for IS 15392 under its relevant annex.<\/p>\n The manufacturer\/licensee needs to maintain appropriate inspection and testing controls to demonstrate continued conformity.<\/p>\n The SIT framework may address:<\/p>\n \n Some common problems include:<\/p>\n There is no single fixed BIS certification cost<\/strong> for every aluminium foil manufacturer.<\/p>\n The overall cost can depend on:<\/p>\n BIS LIMS currently shows separate testing charges for different IS 15392 test parameters, demonstrating why the laboratory-testing portion can vary according to scope.<\/p>\n The certification timeline depends on:<\/p>\n Therefore, manufacturers should avoid claiming a guaranteed fixed certification timeline.<\/p>\n Helps manufacturers comply with applicable mandatory BIS requirements.<\/p>\n Promotes consistent product quality and conformity.<\/p>\n Provides confidence to food-packaging companies and buyers.<\/p>\n Supports compliant supply of covered aluminium foil products.<\/p>\n The BIS certification adds credibility to the manufacturer’s product.<\/p>\n Encourages systematic raw-material, production and finished-product controls.<\/p>\n Qualitance India<\/strong> provides professional BIS Certification Consultancy for aluminium foil and other regulated products.<\/p>\n Our support can include:<\/p>\n \u2713 BIS Applicability Assessment Phone:<\/strong> +91-9310-615-170 QUALITANCE INDIA \u2013 IMPROVING QUALITY AND COMPETENCE<\/strong><\/p>\n Product Identification<\/strong> BIS Certification for Aluminium Foil is the conformity assessment process for aluminium foil products covered by the applicable BIS standard and Quality Control Order.<\/p>\n IS 15392:2003 is the Indian Standard for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification<\/strong>.<\/p>\n Yes, IS 15392 is listed under BIS compulsory certification and the Aluminium Foil (Quality Control) Order, 2020<\/strong>.<\/p>\n The applicable order is the Aluminium Foil (Quality Control) Order, 2020<\/strong>, notified through S.O. 687(E) dated 13 February 2020.<\/p>\n The standard covers aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n The BIS Product Manual references grades G 19000, G 19500, G 19600, G 31000 and G 40800 of IS 737.<\/p>\n The BIS Product Manual specifies 20 metre coils \u2013 3 Nos.<\/strong> under its sampling guidance.<\/p>\n Testing can include pinhole count, freedom from defects, material\/chemical composition, thickness, dimensions, tensile properties, surface condition and other applicable requirements.<\/p>\n Yes. Material\/chemical-composition requirements form part of the testing framework.<\/p>\n Yes. Average thickness and applicable thickness requirements are evaluated.<\/p>\n Pinhole count is one of the testing parameters identified in the BIS LIMS scope for IS 15392.<\/p>\n Product grouping determines how different product variants can be covered within a BIS certification scope.<\/p>\n Factory assessment is part of the applicable BIS certification process.<\/p>\n Documents generally include factory details, manufacturing process, product specifications, raw-material details, machinery information, testing arrangements and quality-control documents.<\/p>\n The cost varies according to testing scope, product variants, laboratory charges, inspection and other certification expenses.<\/p>\n The timeline depends on documentation, testing, factory readiness, BIS scrutiny, inspection and observation closure.<\/p>\n Yes, an eligible manufacturer producing products covered by the applicable QCO can apply for BIS certification.<\/p>\n Eligible foreign manufacturers may apply under the applicable BIS foreign manufacturer certification framework.<\/p>\n The BIS Standard Mark is used by a licensed manufacturer according to the conditions of the BIS licence.<\/p>\n Amendment No. 1 issued in April 2022 modified certain thickness provisions and added specified preferred thicknesses including 80 \u00b5m, 90 \u00b5m and 100 \u00b5m.<\/p>\n Yes. The standard specifically covers aluminium and aluminium alloy bare foil for food packaging.<\/p>\n Yes. BIS LIMS currently lists laboratories and testing scope for IS 15392:2003.<\/p>\n The BIS Product Manual identifies coil\/sheet<\/strong> among the licence-scope parameters.<\/p>\n Yes. Qualitance India can assist with product assessment, documentation, testing coordination, BIS application and factory inspection preparation.<\/p>\n You can start by assessing the aluminium grade, thickness, width, product form, surface condition and manufacturing location against the applicable IS 15392 requirements.<\/p>\n Use these questions in the visible FAQ section and FAQ structured data where eligible:<\/p>\n Service Name:<\/strong> BIS Certification Consultancy for Aluminium and Aluminium Alloy Bare Foil<\/p>\n Service Type:<\/strong> BIS Certification Consultancy<\/p>\n Applicable Standard:<\/strong> IS 15392:2003<\/p>\n Product:<\/strong> Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/p>\n
\nAbout the Product<\/h1>\n
\n
\nWhat is BIS Certification?<\/h1>\n
\nWhat is IS 15392:2003?<\/h1>\n
\nScope of IS 15392<\/h1>\n
\n
\nAmendment to IS 15392<\/h1>\n
\nProducts Covered<\/h1>\n
\n
\nRaw Material Requirements<\/h1>\n
\n
\nMandatory BIS Certification<\/h1>\n
\nApplicable QCO Details<\/h1>\n
Aluminium Foil (Quality Control) Order, 2020<\/h3>\n
\nWho Needs BIS Certification?<\/h1>\n
\n
\nEligibility Criteria<\/h1>\n
\n
\nComplete BIS Certification Process<\/h1>\n
Step 1 \u2013 Product Identification<\/h2>\n
Step 2 \u2013 Standard Assessment<\/h2>\n
Step 3 \u2013 Product Scope Assessment<\/h2>\n
\n
Step 4 \u2013 Grouping Assessment<\/h2>\n
Step 5 \u2013 Factory Assessment<\/h2>\n
Step 6 \u2013 Documentation<\/h2>\n
Step 7 \u2013 Sample Preparation<\/h2>\n
Step 8 \u2013 Laboratory Testing<\/h2>\n
Step 9 \u2013 BIS Application<\/h2>\n
Step 10 \u2013 Application Scrutiny<\/h2>\n
Step 11 \u2013 Factory Inspection<\/h2>\n
Step 12 \u2013 Observation Closure<\/h2>\n
Step 13 \u2013 Licence Grant<\/h2>\n
Step 14 \u2013 Standard Mark<\/h2>\n
Step 15 \u2013 Continued Compliance<\/h2>\n
\nRequired Documents<\/h1>\n
\n
\nTesting Requirements<\/h1>\n
Pinhole Count<\/h3>\n
Freedom from Defects<\/h3>\n
Chemical Composition<\/h3>\n
Thickness<\/h3>\n
Dimensions<\/h3>\n
Tensile Properties<\/h3>\n
Surface Condition<\/h3>\n
Lubricants<\/h3>\n
\nBIS Testing Laboratory<\/h1>\n
\n
\nBIS Product Sampling<\/h1>\n
\nProduct Grouping<\/h1>\n
\n
\nFactory Inspection Process<\/h1>\n
Raw Material Control<\/h3>\n
Manufacturing Process<\/h3>\n
Rolling\/Processing<\/h3>\n
Annealing<\/h3>\n
Quality Control<\/h3>\n
Testing Facilities<\/h3>\n
Calibration<\/h3>\n
Records<\/h3>\n
\nScheme of Inspection and Testing<\/h1>\n
\n
\nCommon Reasons for BIS Application Rejection or Delay<\/h1>\n
\n
\nBIS Certification Cost<\/h1>\n
\n
\nBIS Certification Timeline<\/h1>\n
\n
\nBenefits of BIS Certification<\/h1>\n
Regulatory Compliance<\/h2>\n
Product Quality<\/h2>\n
Customer Confidence<\/h2>\n
Market Acceptance<\/h2>\n
Brand Credibility<\/h2>\n
Better Quality Control<\/h2>\n
\nWhy Choose Qualitance India?<\/h1>\n
\u2713 IS 15392 Scope Assessment
\u2713 Product Grouping Guidance
\u2713 Documentation Support
\u2713 Testing Laboratory Coordination
\u2713 Sample Preparation Guidance
\u2713 BIS Application Assistance
\u2713 Factory Inspection Preparation
\u2713 Quality-Control Documentation
\u2713 Technical Observation Support
\u2713 Product Marking Guidance
\u2713 End-to-End BIS Certification Support<\/p>\nContact Qualitance India<\/h3>\n
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> qualitanceindia.com<\/p>\n
\nStep-by-Step Flow Chart<\/h1>\n
\u2193
IS 15392 Applicability Assessment<\/strong>
\u2193
Product Scope & Grade Identification<\/strong>
\u2193
Grouping Assessment<\/strong>
\u2193
Factory Readiness Assessment<\/strong>
\u2193
Documentation Preparation<\/strong>
\u2193
Sample Preparation<\/strong>
\u2193
Laboratory Testing<\/strong>
\u2193
BIS Application Submission<\/strong>
\u2193
Application Scrutiny<\/strong>
\u2193
Factory Inspection<\/strong>
\u2193
Observation Closure<\/strong>
\u2193
BIS Licence Grant<\/strong>
\u2193
ISI Mark Compliance<\/strong>
\u2193
Ongoing Compliance<\/strong><\/p>\n
\n25 SEO FAQs<\/h1>\n
1. What is BIS Certification for Aluminium Foil?<\/h3>\n
2. What is IS 15392:2003?<\/h3>\n
3. Is BIS Certification mandatory for Aluminium Foil?<\/h3>\n
4. What is the applicable QCO for Aluminium Foil?<\/h3>\n
5. What products are covered under IS 15392?<\/h3>\n
6. What raw materials are specified under IS 15392?<\/h3>\n
7. What is the sample size for IS 15392?<\/h3>\n
8. What tests are required for Aluminium Foil BIS Certification?<\/h3>\n
9. Is chemical composition tested?<\/h3>\n
10. Is thickness tested?<\/h3>\n
11. Is pinhole testing required?<\/h3>\n
12. What is product grouping?<\/h3>\n
13. Is factory inspection required?<\/h3>\n
14. What documents are required?<\/h3>\n
15. How much does BIS Certification for Aluminium Foil cost?<\/h3>\n
16. How long does BIS certification take?<\/h3>\n
17. Can an aluminium foil manufacturer apply for BIS Certification?<\/h3>\n
18. Can foreign manufacturers obtain BIS Certification?<\/h3>\n
19. What is the BIS Standard Mark?<\/h3>\n
20. What amendment was made to IS 15392?<\/h3>\n
21. Does IS 15392 cover food packaging foil?<\/h3>\n
22. Is BIS testing available for IS 15392?<\/h3>\n
23. What forms of foil can be covered?<\/h3>\n
24. Can Qualitance India help with IS 15392 certification?<\/h3>\n
25. How can I start Aluminium Foil BIS Certification?<\/h3>\n
\nFAQ Schema Content<\/h1>\n
\n
\nService Schema Suggestion<\/h1>\n