Power Adaptors for IT Equipments are essential components used with computers, laptops, networking equipment, electronic information technology products and other IT systems. These adaptors convert electrical power from the mains supply into the voltage and current required by the connected equipment.<\/p>\n
Because power adaptors are directly connected to an electrical supply, their design must address important safety considerations such as protection against electric shock, electrical insulation, overcurrent protection, earthing, creepage and clearance distances, mechanical strength and protection against abnormal operating conditions.<\/p>\n
Power Adaptors for IT Equipments were covered under BIS CRS requirements with reference to IS 13252 (Part 1):2010 \u2014 Information Technology Equipment \u2014 Safety \u2014 Part 1: General Requirements.<\/strong> BIS’s official UTRF page lists “Power Adaptors for IT Equipments” against IS 13252 (Part 1):2010.<\/p>\n For manufacturers, importers and brand owners dealing in IT power adaptors, understanding the applicable BIS requirement, testing procedure and registration process is important for maintaining regulatory compliance in India.<\/p>\n Qualitance India provides end-to-end BIS certification consultancy, product testing coordination, documentation assistance and BIS registration support.<\/p>\n The Bureau of Indian Standards (BIS) operates the Compulsory Registration Scheme (CRS) for specified electronic and electrical products.<\/p>\n Under the applicable CRS framework, products covered by the relevant government notification must conform to the prescribed Indian Standard and complete the applicable BIS registration requirements before being placed on the Indian market.<\/p>\n The general process involves:<\/p>\n Power Adaptors for IT Equipments were specifically included in the Electronics and Information Technology Goods Compulsory Registration framework under IS 13252 (Part 1):2010.<\/p>\n The earlier applicable standard for Power Adaptors for IT Equipments was:<\/p>\n IS 13252 (Part 1):2010<\/strong><\/p>\n Title:<\/strong> Information Technology Equipment \u2014 Safety \u2014 Part 1: General Requirements<\/p>\n BIS laboratory records continue to show Power Adaptors for IT Equipments within the testing scope for IS 13252 (Part 1):2010.<\/p>\n The standard addresses safety requirements intended to reduce risks associated with electrical, mechanical and other hazards arising from the operation of information technology equipment and associated power equipment.<\/p>\n Manufacturers should pay particular attention to this point.<\/p>\n BIS’s current Scheme-II Registration Scheme page now lists Power Adaptors for IT Equipments under IS\/IEC 62368: Part 1:2023 \u2014 Audio\/Video, Information and Communication Technology Equipment \u2014 Part 1: Safety Requirements<\/strong>. The same BIS entry records the earlier IS 13252-based requirement and subsequent regulatory amendments.<\/p>\n Therefore, businesses preparing a new BIS application today should not automatically assume that IS 13252 (Part 1):2010 remains the applicable standard for every new application<\/strong>. The current BIS notification, implementation date, transition provisions and product classification should be verified before testing.<\/p>\n This distinction is particularly important when preparing website content, quotations, test plans and new certification applications.<\/p>\n Power adaptors are electrical devices designed to supply appropriate power to electronic equipment.<\/p>\n Depending on their construction and application, examples may include:<\/p>\n The exact regulatory classification depends on the product’s intended use, electrical design, output characteristics and applicable BIS requirements.<\/p>\n Power adaptors must be designed and tested to address several safety-related areas.<\/p>\n The adaptor should provide adequate protection against accidental contact with hazardous live parts.<\/p>\n The enclosure, insulation system and construction should prevent users from coming into contact with dangerous electrical potentials during normal operation.<\/p>\n Adequate insulation is essential between primary and secondary circuits and between hazardous live parts and accessible parts.<\/p>\n Testing may evaluate whether the insulation system can withstand the electrical stresses associated with the product.<\/p>\n Suitable creepage distances and clearances must be maintained between conductive parts.<\/p>\n Insufficient spacing can increase the risk of arcing, insulation breakdown and electrical failure.<\/p>\n Where applicable, suitable protective earthing and bonding provisions must be incorporated into the adaptor.<\/p>\n The design should ensure that accessible conductive parts are adequately protected against electrical hazards.<\/p>\n The adaptor should incorporate suitable protection against abnormal current conditions and relevant earth faults.<\/p>\n Protection may involve appropriate circuit protection components and suitable power supply design.<\/p>\n Depending on the design, the adaptor may contain circuits that fall within requirements relating to safety extra-low voltage or limited current circuits.<\/p>\n The relevant circuit characteristics should be evaluated during product testing.<\/p>\n Power adaptors can generate heat during normal operation. Components, enclosure materials, transformers, switching devices and insulation systems must be suitable for the expected operating temperatures.<\/p>\n The enclosure and other mechanical components should withstand the applicable mechanical stresses associated with normal use, handling and installation.<\/p>\n The product should carry appropriate ratings, identification and safety information.<\/p>\n The applicable requirements may include:<\/p>\n Depending on the current applicable notification and product classification, BIS requirements may affect:<\/p>\n The exact applicant structure should be evaluated before starting the certification process.<\/p>\n The first step is to determine the exact category of the power adaptor and identify the currently applicable Indian Standard.<\/p>\n For older CRS documentation, the relevant category was Power Adaptors for IT Equipments \u2014 IS 13252 (Part 1):2010<\/strong>.<\/p>\n For new applications, the latest BIS Scheme-II requirements should be checked because BIS currently lists the category under IS\/IEC 62368 Part 1:2023.<\/p>\n The product should be reviewed before sending samples for testing.<\/p>\n Important information includes:<\/p>\n Technical and manufacturer documents are prepared according to the applicable BIS registration requirements.<\/p>\n The product should be tested at a suitable BIS-recognized laboratory having the required scope.<\/p>\n BIS laboratory records show Power Adaptors for IT Equipments within the scope of laboratories testing under IS 13252 (Part 1):2010.<\/p>\n Testing may include areas such as:<\/p>\n BIS laboratory listings show these types of test clauses within current IS 13252 Part 1 laboratory scopes.<\/p>\n After testing, the report should be checked carefully for:<\/p>\n Any mismatch between the test report and the BIS application can lead to clarification or delay.<\/p>\n After the testing and documentation are completed, the applicable BIS registration application is prepared and submitted.<\/p>\n The application should contain accurate information regarding the manufacturer, factory, product, brand and test report.<\/p>\n BIS reviews the application and supporting documents. If the application fulfils the applicable requirements, registration can be granted under the relevant scheme.<\/p>\n After registration, the registration holder must maintain product conformity and comply with applicable BIS requirements, including marking and changes to registered products.<\/p>\n Common documents may include:<\/p>\n The exact document set depends on the applicant type and current BIS application requirements.<\/p>\n Testing charges vary according to the laboratory, product construction, applicable standard, test scope and number of models.<\/p>\n Current BIS LIMS listings provide examples of laboratory charges for Power Adaptors for IT Equipments under IS 13252 (Part 1):2010. One laboratory lists \u20b975,000<\/strong> for Power Adapters for IT Equipments along with several related products, while other laboratory listings show different charges.<\/p>\n Another current laboratory listing shows a combined product-category charge of \u20b950,000<\/strong> that includes Power Adaptors for IT Equipments.<\/p>\n These figures are laboratory-specific indicative charges, not a fixed BIS certification fee<\/strong>. The actual testing cost should be confirmed with the selected laboratory based on the product and current applicable standard.<\/p>\n Testing costs may vary because of:<\/p>\n A product with several significantly different variants may require additional evaluation.<\/p>\n Some common technical issues that may require correction include:<\/p>\n A pre-testing technical review can help identify many such issues before formal laboratory testing.<\/p>\n Yes, imported products can be subject to BIS requirements where the applicable CRS regulations cover them.<\/p>\n Foreign manufacturers and importers should review:<\/p>\n The correct applicant structure should be established before testing.<\/p>\n BIS CRS should not automatically be treated as identical to traditional BIS ISI Mark licensing.<\/p>\n CRS registration is primarily based on product conformity, laboratory testing and registration requirements. Whether any inspection or additional verification is required depends on the applicable scheme, product category, BIS instructions and current regulatory framework.<\/p>\n Therefore, applicants should verify the current requirements applicable to their specific product.<\/p>\n For businesses searching specifically for “BIS CRS Certification for Power Adaptors for IT Equipments | IS 13252 (Part 1):2010”<\/strong>, the historical association is supported by BIS’s official Gazette and UTRF records.<\/p>\n However, BIS’s current Scheme-II webpage lists the product against IS\/IEC 62368: Part 1:2023<\/strong>.<\/p>\n This means that manufacturers planning a new certification should verify:<\/p>\n This verification should be completed before laboratory testing.<\/p>\n Qualitance India provides BIS certification consultancy services for Power Adaptors for IT Equipments and other electronic and electrical products.<\/p>\n Our support can include:<\/p>\n Our team works with manufacturers, importers and brand owners to coordinate the certification process from technical assessment through BIS application support.<\/p>\nWhat Is BIS CRS Certification?<\/h2>\n
\n
Applicable Standard: IS 13252 (Part 1):2010<\/h2>\n
Important Current BIS Standard Update<\/h2>\n
What Are Power Adaptors for IT Equipments?<\/h2>\n
\n
Safety Requirements Covered Under the Standard<\/h2>\n
Protection Against Electric Shock<\/h3>\n
Electrical Insulation<\/h3>\n
Creepage and Clearance Distances<\/h3>\n
Earthing and Bonding<\/h3>\n
Overcurrent and Earth-Fault Protection<\/h3>\n
SELV and Limited Current Circuits<\/h3>\n
Thermal Safety<\/h3>\n
Mechanical Strength<\/h3>\n
Marking and Instructions<\/h3>\n
\n
Who Needs BIS Certification for Power Adaptors?<\/h2>\n
\n
BIS Certification Process for Power Adaptors<\/h2>\n
Step 1: Product Classification<\/h3>\n
Step 2: Technical Product Review<\/h3>\n
\n
Step 3: Documentation Preparation<\/h3>\n
Step 4: Selection of Laboratory<\/h3>\n
Step 5: Product Testing<\/h3>\n
\n
Step 6: Test Report Review<\/h3>\n
\n
Step 7: BIS Application<\/h3>\n
Step 8: BIS Scrutiny and Registration<\/h3>\n
Step 9: Post-Registration Compliance<\/h3>\n
Documents Required for BIS Certification<\/h2>\n
Manufacturer Documents<\/h3>\n
\n
Product Documents<\/h3>\n
\n
Brand and Applicant Documents<\/h3>\n
\n
BIS Testing Cost for Power Adaptors<\/h2>\n
What Can Increase Testing Cost?<\/h2>\n
\n
Common Reasons for Testing Failure<\/h2>\n
\n
Can Imported Power Adaptors Obtain BIS Registration?<\/h2>\n
\n
Is Factory Inspection Required Under BIS CRS?<\/h2>\n
IS 13252 (Part 1):2010 vs Current BIS Requirements<\/h2>\n
\n
How Qualitance India Can Help<\/h2>\n
\n