Aluminium Composite Panel (ACP) is a multi-layer panel widely used for building fa\u00e7ades, exterior cladding, interior wall applications, partitions, signage, architectural features and other construction-related applications. Its performance depends on the quality of the aluminium sheets, polymer core, adhesive and protective surface coating.<\/p>\n
To provide consistent product performance, manufacturers need to control important parameters such as dimensions, core density, tensile properties, peel strength, coating thickness, coating adhesion, pencil hardness, gloss, weather resistance and chemical resistance. For certain grades, fire-retardance characteristics are also applicable.<\/p>\n
In India, Aluminium Composite Panel<\/strong> is covered under IS 17682:2021 \u2013 Aluminium Composite Panel<\/strong>. The product is covered under the BIS Scheme-I<\/strong> certification framework, and the current BIS Scheme-I product list continues to identify IS 17682:2021.<\/p>\n The current BIS Product Manual is PM\/IS 17682\/3\/Mar 2025<\/strong>, which records one amendment<\/strong> and provides the current certification guidance for applicants and licensees.<\/p>\n Qualitance India provides end-to-end BIS Certification consultancy for Aluminium Composite Panel manufacturers, including product-scope assessment, documentation, laboratory testing coordination, factory inspection preparation, technical compliance and BIS licence support.<\/p>\n Aluminium Composite Panel is an engineered panel consisting of aluminium alloy sheets combined with a core material and bonded through an appropriate manufacturing process.<\/p>\n The panel normally includes:<\/p>\n ACP is commonly selected because of its combination of low weight, flatness, appearance, ease of fabrication and suitability for architectural applications.<\/p>\n Depending on the grade and construction, ACP can also be designed to meet additional fire-performance or functional requirements.<\/p>\n The applicable standard is:<\/p>\n IS 17682:2021 \u2013 Aluminium Composite Panel<\/strong><\/p>\n The current BIS Product Manual is:<\/p>\n PM\/IS 17682\/3\/Mar 2025<\/strong><\/p>\n The current manual states:<\/p>\n Yes. IS 17682:2021 \u2013 Aluminium Composite Panel<\/strong> is included in the current BIS compulsory certification listing under the Aluminium and Aluminium Alloy Products category.<\/p>\n The applicable regulatory framework requires covered products to conform to the relevant Indian Standard and carry the Standard Mark under the applicable BIS certification scheme.<\/p>\n The aluminium-product Quality Control Order framework also states that the latest version of the applicable Indian Standard, including amendments notified by BIS, applies.<\/p>\n Therefore, manufacturers should ensure that their products, raw materials, testing arrangements and production controls correspond to the current BIS requirements.<\/p>\n The current Product Manual PM\/IS 17682\/3\/Mar 2025<\/strong> is especially important for certification planning.<\/p>\n It specifies a sample quantity of:<\/p>\n 5 Panels<\/strong><\/p>\n for laboratory testing for grant of licence, change in scope and applicable factory-surveillance activities.<\/p>\n The Product Manual also requires certain parameters to be declared in the test request. These include:<\/p>\n As per the current grouping provisions, Aluminium Composite Panels are classified into:<\/p>\n The exact characteristics of each grade and the applicable requirements should be assessed against the current version of IS 17682:2021 and the applicable amendment.<\/p>\n The Product Manual identifies the following nominal dimensions:<\/p>\n Length \u00d7 Width<\/strong><\/p>\n The nominal thicknesses listed are:<\/p>\n Other dimensions may also be used where agreed between the manufacturer and purchaser.<\/p>\n The current Product Manual identifies the licence scope as:<\/p>\n Product:<\/strong> Aluminium Composite Panel<\/p>\n Grade:<\/strong> 1 \/ 2 \/ 3 \/ 4 \/ 5<\/p>\n Size:<\/strong> Length \u00d7 Width \u00d7 Thickness<\/p>\n Optional Requirements:<\/strong> With \/ Without<\/p>\n The actual licence scope is subject to the tested varieties and the manufacturing and testing capabilities demonstrated by the manufacturer.<\/p>\n Grouping is a major part of the BIS certification process because it determines which varieties need to be tested to establish a particular licence scope.<\/p>\n The current Product Manual identifies:<\/p>\n Each grade must be tested for all applicable requirements to cover that grade in the licence scope.<\/p>\n The highest nominal size and highest thickness<\/strong> are to be tested for all requirements to cover sizes and thicknesses up to and including the tested nominal size and thickness, subject to the applicable grouping conditions.<\/p>\n Where optional requirements are selected, one sample from each grade<\/strong> is required to be tested for the applicable optional requirements to cover them in the licence scope.<\/p>\n The manufacturer must declare the type of protective coating used for each grade. The revised Product Manual also requires the coating type and number of coats<\/strong> to be declared in the test request.<\/p>\n BIS may restrict the final scope according to the manufacturer’s actual manufacturing and testing capabilities.<\/p>\n The current Product Manual identifies the following major raw-material requirements:<\/p>\n Polymer granules must comply with Clause 5.1 of IS 17682.<\/p>\n Aluminium alloy sheets must comply with Clause 5.2 of IS 17682.<\/p>\n The manufacturer is required to obtain a test certificate for the adhesive according to Clause 5.3 of IS 17682.<\/p>\n The manufacturer must declare the type of coating for each grade according to Clause 5.4 of IS 17682.<\/p>\n The current Scheme of Inspection and Testing classifies these raw-material checks as subcontractable tests.<\/p>\n The Product Manual specifies testing of:<\/p>\n No further testing is required for polymer granules where the material is received with the specified test certificate or is ISI Marked, according to the Product Manual.<\/p>\n A typical ACP manufacturing process can involve:<\/p>\n Aluminium sheets, polymer granules, adhesive and coating materials are checked before use.<\/p>\n The polymer core is produced or prepared according to the manufacturer’s process.<\/p>\n The aluminium sheets are processed and prepared for bonding.<\/p>\n The required protective coating system is applied to the aluminium surface.<\/p>\n The aluminium sheets and core are bonded through the specified manufacturing process.<\/p>\n The individual layers are consolidated into a composite panel.<\/p>\n Panels are stabilized under controlled manufacturing conditions.<\/p>\n Panels are cut to the required dimensions and finished.<\/p>\n Finished panels undergo dimensional, mechanical, coating and other applicable testing.<\/p>\n Conforming panels are marked and packed according to BIS requirements.<\/p>\n The current BIS Product Manual identifies physical, mechanical, coating, fire-retardance and optional performance requirements.<\/p>\n Dimensions are checked for conformity with the applicable requirements.<\/p>\n The Product Manual specifically identifies:<\/p>\n as production-control parameters.<\/p>\n The density of the panel core is checked against the applicable requirement.<\/p>\n The specified testing arrangement references IS 13360 (Part 3\/Sec 10)<\/strong>.<\/p>\n Tensile strength of the applicable aluminium component is assessed using the relevant test method.<\/p>\n The Product Manual references IS 1608 (Part 1)<\/strong> for tensile strength, yield strength and elongation testing.<\/p>\n Yield strength is evaluated as part of the mechanical-property requirements.<\/p>\n Elongation is measured as part of the tensile-property evaluation.<\/p>\n Peel strength is an important performance parameter because the bonding between the aluminium skin and core directly affects the durability of the panel.<\/p>\n The Product Manual references testing according to the applicable provisions of IS 17682.<\/p>\n The thickness of the protective coating is measured to verify conformity.<\/p>\n The Product Manual references IS 6012<\/strong> for coating-thickness testing.<\/p>\n Cross-hatch adhesion is evaluated to determine whether the coating remains properly bonded to the substrate.<\/p>\n The current Product Manual references IS 101 (Part 5\/Sec 2)<\/strong> for the test facility.<\/p>\n The surface coating is tested for pencil hardness.<\/p>\n The Product Manual references IS 101 (Part 5\/Sec 1)<\/strong>.<\/p>\n Surface gloss is measured using a glossmeter.<\/p>\n The current Product Manual includes colour-retention assessment, with a spectrophotometer identified in the equipment list.<\/p>\n Chalk resistance is evaluated using the applicable method in IS 17682.<\/p>\n Weather performance includes:<\/p>\n The Product Manual identifies weatherometer-related testing as part of the coating-performance requirements.<\/p>\n Chemical resistance is tested against applicable chemicals and agents including:<\/p>\n The current Product Manual identifies these requirements under the coating tests.<\/p>\n Fire-retardance requirements under Table 4 apply specifically to:<\/p>\n Grade 3, Grade 4 and Grade 5<\/strong> ACPs.<\/p>\n The applicable tests include:<\/p>\n The limiting oxygen index is determined using the applicable test method.<\/p>\n Smoke generation is assessed using the relevant test method.<\/p>\n Ignitability is evaluated according to the applicable test procedure.<\/p>\n The flame-spread characteristics are evaluated where applicable.<\/p>\n Non-combustibility is assessed according to the prescribed test method.<\/p>\n The gross calorific performance is assessed using the applicable oxygen bomb calorimeter procedure.<\/p>\n The current Product Manual identifies test facilities for these requirements with reference to relevant Indian Standards.<\/p>\n The standard also provides optional performance requirements.<\/p>\n These include:<\/p>\n Where these optional requirements are included in the licence, the applicable tests must be completed according to the grouping provisions.<\/p>\n The current Product Manual provides an indicative list of equipment.<\/p>\n The test arrangement may include:<\/p>\n Depending on the grade and scope:<\/p>\n The current Product Manual provides the relevant test-equipment references in Annex-C.<\/p>\n The Product Manual requires manufacturers and licensees to implement a Quality Assurance Plan<\/strong> consisting of regular testing and in-process controls to ensure that Standard Mark-bearing products conform to the Indian Standard.<\/p>\n The manufacturer must define:<\/p>\n The Quality Assurance Plan is to be submitted to the BIS Branch Office for information.<\/p>\n The current Product Manual recommends that a control unit consist of Aluminium Composite Panels having:<\/p>\n This definition is important for routine testing and production control.<\/p>\n The current Scheme of Inspection and Testing identifies several routine tests.<\/p>\n The following are identified as routine requirements:<\/p>\n The Product Manual specifies one sample per control unit for these applicable routine parameters.<\/p>\n One sample is tested once a week for each applicable combination of:<\/p>\n One sample is tested once every six months, with each grade and coating type\/number of coats tested in rotation.<\/p>\n One sample is tested once a year, with grades, coating types and numbers of coats tested in rotation.<\/p>\n One sample is tested once a month for each applicable grade and protective coating type.<\/p>\n For Grades 3, 4 and 5<\/strong>, the Product Manual identifies the following:<\/p>\n Where optional requirements are included:<\/p>\n The Product Manual expects manufacturers to establish a suitably equipped and staffed in-house laboratory for the routine tests required to maintain product quality.<\/p>\n The manual distinguishes between:<\/p>\n R \u2013 Testing required in-house<\/strong><\/p>\n and<\/p>\n S \u2013 Subcontracting permitted<\/strong><\/p>\n For subcontracted tests, testing may be carried out through:<\/p>\n The corresponding reports must remain available for BIS inspection.<\/p>\n For MSME manufacturers, maintaining an in-house facility for routine tests marked \u201cR\u201d is optional under the Product Manual.<\/p>\n MSME manufacturers may use:<\/p>\n Large-scale manufacturers are expected to maintain an in-house laboratory with facilities for routine tests.<\/p>\n The Product Manual also provides an alternative through the permitted sharing-of-testing-facilities mechanism. Manufacturers must maintain an appropriate calibration plan for relevant in-house equipment.<\/p>\n The current Product Manual specifies:<\/p>\n 5 Panels<\/strong><\/p>\n as the sample quantity for Aluminium Composite Panel certification activities.<\/p>\n Manufacturers should ensure that samples are representative of the proposed grade, size, thickness, coating system and other declared characteristics.<\/p>\n During factory inspection, BIS or the authorized auditor may assess:<\/p>\n The manufacturer should demonstrate control over:<\/p>\n The manufacturing process should match the declared scope.<\/p>\n The required in-house testing facilities, calibration and technical personnel should be available as applicable.<\/p>\n Records should be maintained for:<\/p>\n BIS marking should be applied correctly only to conforming production covered under the licence.<\/p>\n The current Product Manual states that the Standard Mark<\/strong> is to be incorporated indelibly and clearly on each ACP, provided the marked material conforms to the requirements of the specification.<\/p>\n The Product Manual additionally requires the packing boxes to carry:<\/p>\n \u201cFor BIS certification details please visit <\/strong>www.bis.gov.in\u201d<\/strong><\/a><\/p>\n Only production conforming to the standard and covered under the licence should bear the Standard Mark.<\/p>\n BIS LIMS currently shows active laboratory scopes for Aluminium Composite Panel under IS 17682:2021<\/strong>. The current listings show laboratories with different combinations of grade\/scope and testing charges.<\/p>\n Because some laboratories have exclusions for certain tests and others have different scope coverage, the laboratory should be selected according to the exact product scope and test requirements.<\/p>\n Current BIS LIMS listings show significant variation depending on laboratory and scope.<\/p>\n Examples include:<\/p>\n These are laboratory testing charges<\/strong>, not the complete BIS certification cost.<\/p>\n The cost can increase substantially where the scope includes extensive weathering, fire-performance or optional acoustic\/thermal tests.<\/p>\n The total certification expenditure can depend on:<\/p>\n Therefore, a single fixed amount cannot be applied to every Aluminium Composite Panel manufacturer.<\/p>\n Typical documents may include:<\/p>\n The final list depends on the proposed product scope and factory structure.<\/p>\n The general process is:<\/p>\n Factory Assessment \u2192 Product Scope Finalization \u2192 Documentation \u2192 BIS Application \u2192 Sample Preparation \u2192 Laboratory Testing \u2192 Factory Inspection \u2192 Compliance Closure \u2192 BIS Licence \u2192 Standard Marking<\/strong><\/p>\n Scope should be finalized before testing because the grouping rules are linked to grade, size, thickness, coating and optional requirements.<\/p>\n ACP manufacturers may face delays because of:<\/p>\n Proper technical preparation before application can significantly reduce avoidable delays.<\/p>\n Manufacturers supplying covered Aluminium Composite Panels in India generally require the applicable BIS certification.<\/p>\n This can include ACP manufacturers supplying panels for:<\/p>\n The applicability of specific regulatory exemptions should be checked against the current Quality Control Order.<\/p>\n BIS certification can help manufacturers achieve:<\/p>\n Manufacturer Assessment \u2192 Product Scope \u2192 Documentation \u2192 BIS Application \u2192 Testing \u2192 Factory Inspection \u2192 Compliance \u2192 BIS Licence \u2192 Standard Mark<\/strong><\/p>\n Qualitance India provides professional BIS Certification consultancy for Aluminium Composite Panel manufacturers.<\/p>\n Our support can include:<\/p>\n We help manufacturers organize their technical, documentation and testing requirements before approaching BIS.<\/p>\n It is the BIS conformity assessment process through which an ACP manufacturer demonstrates compliance with IS 17682:2021 and obtains authorization to use the Standard Mark within the approved scope.<\/p>\n The applicable product standard is IS 17682:2021 \u2013 Aluminium Composite Panel<\/strong>.<\/p>\n Yes. IS 17682:2021 is included in the current BIS compulsory certification listing.<\/p>\n The current Product Manual is issued under Scheme-I<\/strong> of the BIS Conformity Assessment Regulations, 2018.<\/p>\n The current Product Manual is PM\/IS 17682\/3\/Mar 2025<\/strong> and records one amendment.<\/p>\n The current Product Manual specifies 5 panels<\/strong>.<\/p>\n The grouping provisions identify:<\/p>\n Nominal dimensions include 1200 \u00d7 2400 mm, 1200 \u00d7 3050 mm and 1200 \u00d7 3660 mm, with nominal thicknesses of 2, 3, 4, 5 and 6 mm.<\/p>\n Yes. The Product Manual states that other dimensions may be used as agreed between the manufacturer and purchaser.<\/p>\n Major controlled inputs include polymer granules, aluminium alloy sheets, adhesive and surface coating.<\/p>\n Yes. The manufacturer must declare the protective-coating type for each grade, and the test request also requires the coating type and number of coats to be declared.<\/p>\n Important tests include density of core, tensile strength, yield strength, elongation, peel strength, coating thickness, adhesion, pencil hardness, gloss, weathering and chemical resistance.<\/p>\n The Product Manual applies the fire-retardance requirements under Table 4 to Grades 3, 4 and 5<\/strong>.<\/p>\n The applicable fire requirements include limiting oxygen index, smoke density rating, ignitability, flame spread, non-combustibility and oxygen bomb calorimeter testing.<\/p>\n Optional tests include sound transmission class, sound absorption coefficient, coefficient of linear thermal expansion and thermal conductivity.<\/p>\n The recommended control unit consists of ACP of the same grade, protective-coating type, number of coats and size, produced under similar conditions in one day from the same raw-material consignment.<\/p>\n Routine testing facilities are generally expected, with specific provisions for subcontracting and shared testing facilities.<\/p>\n Yes. For applicable routine tests, MSME manufacturers may use common cluster facilities, shared facilities, BIS-recognized\/empanelled laboratories or valid NABL-accredited laboratories according to the Product Manual.<\/p>\n The Product Manual provides for sharing-of-testing-facilities arrangements as an alternative to maintaining certain in-house facilities, subject to the applicable BIS provisions.<\/p>\n Current BIS LIMS listings show different charges depending on the scope and laboratory, ranging from approximately \u20b942,000 to \u20b9230,000 or more for displayed scopes.<\/p>\n No. Laboratory testing charges are separate from BIS certification-related costs.<\/p>\n Documents generally include company and factory details, product specifications, machinery, manufacturing process, raw-material information, testing facilities, calibration records, quality documents and proposed marking information.<\/p>\n Factory assessment\/inspection is an important part of the BIS licensing process.<\/p>\n The Standard Mark must be incorporated indelibly and clearly on conforming ACP covered under the licence. The packing boxes must additionally carry the statement \u201cFor BIS certification details please visit <\/strong>www.bis.gov.in\u201d<\/strong><\/a>.<\/p>\n The manufacturer should investigate the root cause, implement corrective action and follow the applicable BIS retesting\/compliance procedure.<\/p>\n The grouping provisions allow the highest tested nominal size and thickness to cover lower sizes and thicknesses up to the tested values, subject to the applicable conditions.<\/p>\n No. Each grade must be considered under the Product Manual’s grouping provisions, and each grade is required to be tested for all applicable requirements to establish coverage of that grade.<\/p>\n Routine frequencies vary. For example, coating thickness, pencil hardness and gloss are tested each control unit; adhesion is tested weekly for each applicable combination; weatherometer tests occur at six-month and annual frequencies as specified; and chemical resistance is tested monthly.<\/p>\n For Grades 3, 4 and 5, the Product Manual specifies different frequencies for LOI, smoke density, ignitability, flame spread, non-combustibility and oxygen bomb calorimeter.<\/p>\n Yes. Qualitance India provides end-to-end assistance covering application preparation, technical documentation, scope planning, laboratory testing coordination, factory inspection preparation and BIS licence support.<\/p>\n Qualitance India also provides consultancy for manufacturers of products covered by Indian Standards and mandatory Quality Control Orders.<\/p>\n Our services include:<\/p>\n BIS Certification Consultancy | BIS Licence | ISI Mark Certification | Product Testing | Documentation Support | Factory Inspection Assistance | Quality Plan Preparation | Technical Compliance Support | Scope Extension | Licence Renewal | End-to-End BIS Support<\/strong><\/p>\n Qualitance India<\/strong> Phone:<\/strong> +91 93106 15170 Manufacturers of Aluminium Composite Panels can contact Qualitance India for assistance with IS 17682:2021 certification, product testing, product grouping, technical documentation, factory inspection preparation and BIS licence support.<\/p>\n Aluminium Composite Panels are widely used in modern construction and architectural applications, making product consistency, coating durability, mechanical performance and, for applicable grades, fire performance important considerations.<\/p>\n IS 17682:2021 \u2013 Aluminium Composite Panel<\/strong> is included in the BIS compulsory certification framework. The current PM\/IS 17682\/3\/Mar 2025<\/strong> Product Manual specifies 5 panels<\/strong> as the sample quantity and provides detailed requirements for grades, dimensions, grouping, raw materials, testing equipment, routine inspection, quality assurance, marking and licence scope.<\/p>\n The licence scope is particularly important because the Product Manual considers grade, size, thickness, protective coating, number of coats and optional requirements<\/strong>. Proper planning of these parameters before testing can help manufacturers avoid unnecessary testing and certification delays.<\/p>\n For manufacturers planning BIS certification for Aluminium Composite Panel, Qualitance India provides professional support for documentation, laboratory testing coordination, product-scope planning, technical compliance, factory inspection preparation and BIS licence processing.<\/p>\n","protected":false},"excerpt":{"rendered":" Introduction Aluminium Composite Panel (ACP) is a multi-layer panel widely used for building fa\u00e7ades, exterior cladding, interior wall applications, partitions, signage, architectural features and other construction-related applications. Its performance depends on the quality of the aluminium sheets, polymer core, adhesive and protective surface coating. To provide consistent product performance, manufacturers need to control important parameters […]<\/p>\n","protected":false},"author":1,"featured_media":3655,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification Consultancy for Aluminium Composite Panel | IS 17682:2021 - Qualitance India","description":"Introduction Aluminium Composite Panel (ACP) is a multi-layer panel widely used for building fa\u00e7ades, exterior cladding, interior wall applications, partitions,"},"_slim_seo_primary_term_category":0,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3654","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3654","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=3654"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3654\/revisions"}],"predecessor-version":[{"id":3656,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3654\/revisions\/3656"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/3655"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=3654"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=3654"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=3654"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}What is Aluminium Composite Panel?<\/h2>\n
\n
BIS Standard for Aluminium Composite Panel<\/h2>\n
\n
Is BIS Certification Mandatory for Aluminium Composite Panel?<\/h2>\n
Current BIS Product Manual for IS 17682:2021<\/h2>\n
\n
Grades of Aluminium Composite Panel<\/h2>\n
\n
Standard Sizes Covered<\/h2>\n
\n
\n
BIS Licence Scope for Aluminium Composite Panel<\/h2>\n
BIS Grouping Guidelines for ACP<\/h2>\n
Grade<\/h3>\n
Size and Thickness<\/h3>\n
Optional Requirements<\/h3>\n
Protective Coating<\/h3>\n
Raw Materials for Aluminium Composite Panel<\/h2>\n
1. Polymer Granules<\/h3>\n
2. Aluminium Alloy Sheets<\/h3>\n
3. Adhesive<\/h3>\n
4. Surface Coating<\/h3>\n
Raw-Material Testing and Control<\/h2>\n
\n
Manufacturing Process of Aluminium Composite Panel<\/h2>\n
1. Raw-Material Inspection<\/h3>\n
2. Core Preparation<\/h3>\n
3. Aluminium Sheet Preparation<\/h3>\n
4. Coating<\/h3>\n
5. Bonding<\/h3>\n
6. Lamination<\/h3>\n
7. Cooling and Conditioning<\/h3>\n
8. Cutting and Finishing<\/h3>\n
9. Inspection and Testing<\/h3>\n
10. Packing and Marking<\/h3>\n
Major Tests for Aluminium Composite Panel<\/h2>\n
1. Dimensions<\/h2>\n
\n
2. Density of Core<\/h2>\n
3. Tensile Strength<\/h2>\n
4. Yield Strength<\/h2>\n
5. Elongation<\/h2>\n
6. Peel Strength<\/h2>\n
7. Coating Thickness<\/h2>\n
8. Coating Adhesion<\/h2>\n
9. Pencil Hardness<\/h2>\n
10. Gloss<\/h2>\n
11. Colour Retention<\/h2>\n
12. Chalk Resistance<\/h2>\n
13. Weatherometer Testing<\/h2>\n
\n
14. Chemical Resistance<\/h2>\n
\n
Fire Retardance Requirements<\/h2>\n
Limiting Oxygen Index<\/h3>\n
Smoke Density Rating<\/h3>\n
Ignitability<\/h3>\n
Flame Spread<\/h3>\n
Non-Combustibility<\/h3>\n
Oxygen Bomb Calorimeter<\/h3>\n
Optional Tests for Aluminium Composite Panel<\/h2>\n
\n
Testing Equipment Required for ACP<\/h2>\n
For Dimensions, Squareness and Straightness<\/h3>\n
\n
For Core Density<\/h3>\n
\n
For Tensile Properties<\/h3>\n
\n
For Peel Strength<\/h3>\n
\n
For Coating<\/h3>\n
\n
For Weathering<\/h3>\n
\n
For Fire Performance<\/h3>\n
\n
For Optional Tests<\/h3>\n
\n
Quality Assurance Plan for ACP Manufacturers<\/h2>\n
\n
Control Unit for Aluminium Composite Panel<\/h2>\n
\n
Routine Testing Requirements<\/h2>\n
Every Control Unit<\/h3>\n
\n
Adhesion<\/h3>\n
\n
Weatherometer \u2013 Humidity and Neutral Salt Spray<\/h3>\n
Accelerated Weathering<\/h3>\n
Chemical Resistance<\/h3>\n
Fire-Test Routine Requirements<\/h2>\n
\n
Optional-Test Frequency<\/h2>\n
\n
In-House Laboratory Requirements<\/h2>\n
\n
MSME Testing Facility Provisions<\/h2>\n
\n
Large Manufacturer Laboratory Requirements<\/h2>\n
BIS Sample Size<\/h2>\n
Factory Inspection for BIS Certification<\/h2>\n
Raw Materials<\/h3>\n
\n
Production<\/h3>\n
Testing Facility<\/h3>\n
Quality Records<\/h3>\n
\n
Product Marking<\/h3>\n
BIS Marking Requirements for Aluminium Composite Panel<\/h2>\n
BIS Testing Laboratories for IS 17682:2021<\/h2>\n
Current BIS Testing Charges for Aluminium Composite Panel<\/h2>\n
\n
Total Cost of BIS Certification for ACP<\/h2>\n
\n
Documents Required for BIS Certification<\/h2>\n
\n
BIS Certification Process for Aluminium Composite Panel<\/h2>\n
Common Reasons for BIS Certification Delays<\/h2>\n
\n
Who Needs BIS Certification for Aluminium Composite Panel?<\/h2>\n
\n
Benefits of BIS Certification for ACP Manufacturers<\/h2>\n
\n
BIS Certification for Aluminium Composite Panel \u2013 Quick Process<\/h2>\n
Why Choose Qualitance India for ACP BIS Certification?<\/h2>\n
\n
Frequently Asked Questions<\/h2>\n
1. What is BIS Certification for Aluminium Composite Panel?<\/h3>\n
2. Which standard applies to Aluminium Composite Panel?<\/h3>\n
3. Is BIS certification mandatory for ACP?<\/h3>\n
4. What certification scheme applies?<\/h3>\n
5. What is the current Product Manual?<\/h3>\n
6. What is the sample quantity for ACP BIS certification?<\/h3>\n
7. What grades are covered?<\/h3>\n
\n
8. What standard dimensions are listed?<\/h3>\n
9. Can other ACP dimensions be manufactured?<\/h3>\n
10. What raw materials are controlled?<\/h3>\n
11. Is coating information required?<\/h3>\n
12. What are the main ACP tests?<\/h3>\n
13. Which grades require fire-retardance tests?<\/h3>\n
14. What are the fire tests for ACP?<\/h3>\n
15. What optional tests are available?<\/h3>\n
16. What is the control unit for ACP?<\/h3>\n
17. Is an in-house laboratory required?<\/h3>\n
18. Can MSME manufacturers use external testing facilities?<\/h3>\n
19. Can large manufacturers use shared testing facilities?<\/h3>\n
20. What is the ACP testing cost?<\/h3>\n
21. Does the laboratory fee include the BIS licence fee?<\/h3>\n
22. What documents are required?<\/h3>\n
23. Is factory inspection required?<\/h3>\n
24. What marking is required on ACP?<\/h3>\n
25. What happens if ACP fails testing?<\/h3>\n
26. Can one tested ACP size cover other sizes?<\/h3>\n
27. Can one grade cover another grade automatically?<\/h3>\n
28. How frequently are coating tests performed after certification?<\/h3>\n
29. How frequently are fire tests performed?<\/h3>\n
30. Can Qualitance India provide complete ACP BIS consultancy?<\/h3>\n
Frequently Searched Topics<\/h2>\n
\n
Related BIS Certification Services<\/h2>\n
Contact Qualitance India<\/h2>\n
\nBIS Certification Consultancy for Manufacturers<\/p>\n
\nEmail:<\/strong> info@qualitanceindia.com<\/a>
\nWebsite:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\nConclusion<\/h2>\n