BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> is a mandatory compliance requirement for products covered under the Aluminium Foil (Quality Control) Order, 2020<\/strong>. BIS’s current compulsory-certification listing identifies IS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> under this QCO.<\/p>\n

The applicable Indian Standard is IS 15392:2003 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification<\/strong>. The standard covers annealed aluminium and aluminium alloy bare foil intended for food packaging. The BIS standard preview states that the original scope covered thicknesses from 0.011 mm (11 \u00b5m) to 0.075 mm (75 \u00b5m)<\/strong>, while Amendment No. 1, April 2022<\/strong> extended the upper limit to 0.100 mm (100 \u00b5m)<\/strong> and added preferred thicknesses of 80, 90 and 100 \u00b5m.<\/p>\n

BIS certification involves assessment of the manufacturer’s production and quality-control capabilities, product testing, documentation, sampling, factory assessment and compliance with the applicable Scheme-I requirements.<\/p>\n

For manufacturers supplying aluminium foil for food packaging in India, obtaining the applicable BIS licence and complying with the Aluminium Foil QCO is therefore an important regulatory requirement.<\/p>\n

\n
\n<\/div>\n
About the Product<\/h1>\n
Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> is thin aluminium foil used in packaging applications where aluminium’s barrier, formability and protective characteristics are required.<\/p>\n
The product can be supplied in different forms and surface conditions according to the applicable specification.<\/p>\n
Common applications include:<\/p>\n
\n
Food packaging<\/li>\n
Household food wrapping<\/li>\n
Food container applications<\/li>\n
Flexible packaging<\/li>\n
Packaging components<\/li>\n
Bakery and confectionery packaging<\/li>\n
Dairy and food-product packaging<\/li>\n
Industrial food packaging applications<\/li>\n<\/ul>\n
The exact applicability of BIS certification depends on the product specification, intended application and scope of IS 15392.<\/p>\n
\n
\n<\/div>\n
What is BIS Certification?<\/h1>\n
BIS Certification<\/strong> is a conformity-assessment mechanism operated by the Bureau of Indian Standards (BIS)<\/strong>.<\/p>\n
Under compulsory certification\/QCO requirements, manufacturers of specified products must demonstrate conformity with the applicable Indian Standard and obtain the required BIS licence before using the Standard Mark and supplying the covered product as permitted by the applicable regulation.<\/p>\n
BIS currently lists Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 IS 15392<\/strong> under the Aluminium Foil (Quality Control) Order, 2020<\/strong>.<\/p>\n
The certification framework for this product operates under Scheme-I<\/strong> of the BIS conformity-assessment framework, with the Product Manual providing guidance on sampling, grouping, testing equipment, inspection and testing requirements.<\/p>\n
\n
\n<\/div>\n
What is IS 15392:2003?<\/h1>\n
IS 15392:2003<\/strong> is titled:<\/p>\n
Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification<\/strong><\/p>\n
The standard specifies requirements for annealed aluminium and aluminium alloy bare foil used for food packaging. The BIS standard record shows that IS 15392:2003 is active and was reaffirmed in 2022.<\/p>\n
The standard addresses important product characteristics including:<\/p>\n
\n
Material<\/li>\n
Chemical composition<\/li>\n
Thickness<\/li>\n
Dimensions<\/li>\n
Tolerances<\/li>\n
Pinhole count<\/li>\n
Freedom from defects<\/li>\n
Surface condition<\/li>\n
Tensile properties<\/li>\n
Lubricants<\/li>\n
Other applicable physical characteristics<\/li>\n<\/ul>\n
The BIS Product Manual identifies the relevant testing and sampling framework for certification.<\/p>\n
\n
\n<\/div>\n
Scope of IS 15392<\/h1>\n
IS 15392 covers annealed aluminium and aluminium alloy bare foil for food packaging<\/strong>.<\/p>\n
The BIS standard preview identifies the original thickness range as 0.011 mm to 0.075 mm<\/strong>. Following Amendment No. 1 issued in April 2022, the upper thickness limit was changed to 0.100 mm<\/strong>, with additional preferred thicknesses of:<\/p>\n
\n
0.080 mm<\/li>\n
0.090 mm<\/li>\n
0.100 mm<\/li>\n<\/ul>\n
The amendment also introduced corresponding tensile breaking-load values for these thicknesses.<\/p>\n
Therefore, when preparing a BIS application, manufacturers should define their proposed licence scope accurately according to the current standard and amendment.<\/p>\n
\n
\n<\/div>\n
Products Covered<\/h1>\n
Depending on the applicable scope, products can include:<\/p>\n
\n
Aluminium Bare Foil<\/li>\n
Aluminium Alloy Bare Foil<\/li>\n
Food Packaging Aluminium Foil<\/li>\n
Annealed Aluminium Foil<\/li>\n
Aluminium Foil in Coil Form<\/li>\n
Aluminium Foil in Sheet Form<\/li>\n
Aluminium Packaging Foil<\/li>\n
Food-Grade Aluminium Foil<\/li>\n
Aluminium Foil for Packaging Applications<\/li>\n<\/ul>\n
The BIS Product Manual indicates that the licence scope can include parameters such as:<\/p>\n
\n
Nominal thickness<\/li>\n
Width<\/li>\n
Form of product<\/li>\n
Coil\/Sheet<\/li>\n
Surface condition<\/li>\n
Dry annealed condition<\/li>\n
Slick annealed condition<\/li>\n<\/ul>\n
The exact scope should be finalized based on the manufacturer’s actual product range and the applicable BIS requirements.<\/p>\n
\n
\n<\/div>\n
Aluminium Foil Forms Covered Under BIS<\/h1>\n
The Product Manual specifically refers to product forms such as:<\/p>\n
Coil<\/h3>\n
Aluminium foil supplied in coil form for further packaging or converting applications.<\/p>\n
Sheet<\/h3>\n
Aluminium foil supplied in sheet form.<\/p>\n
The manufacturer should clearly define the form of product included within the proposed BIS licence scope.<\/p>\n
\n
\n<\/div>\n
Surface Conditions<\/h1>\n
The BIS Product Manual identifies surface-condition options within the licence scope, including:<\/p>\n
\n
Dry annealed<\/li>\n
Slick annealed<\/li>\n<\/ul>\n
The applicable surface condition should be declared and controlled according to the product specification and manufacturing process.<\/p>\n
\n
\n<\/div>\n
Aluminium Foil Quality Control Order, 2020<\/h1>\n
The Aluminium Foil (Quality Control) Order, 2020<\/strong> is the regulatory framework under which the specified aluminium foil product is subject to compulsory BIS certification.<\/p>\n
BIS’s current compulsory-certification listing identifies:<\/p>\n
Product:<\/strong> Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/p>\n
Indian Standard:<\/strong> IS 15392<\/p>\n
QCO:<\/strong> Aluminium Foil (Quality Control) Order, 2020<\/p>\n
Notification:<\/strong> S.O. 687 (E), dated 13 February 2020.<\/p>\n
Manufacturers should check the latest applicable QCO notifications, amendments and BIS directions before making compliance decisions.<\/p>\n
\n
\n<\/div>\n
Enforcement \/ Implementation<\/h1>\n
The product is covered under the Aluminium Foil (Quality Control) Order, 2020<\/strong>.<\/p>\n
For website content, it is preferable to refer to the official QCO and current BIS compulsory-certification listing rather than relying on an old implementation-date statement, because regulatory notifications and transition provisions can be updated.<\/p>\n
BIS’s current listing continues to show IS 15392 under the Aluminium Foil QCO.<\/p>\n
\n
\n<\/div>\n
Applicable QCO Details<\/h1>\n\n\n\n\n\n\n\n\n\n\n\n\n
Particular<\/th>\n Details<\/th>\n<\/tr>\n
Product<\/td>\n Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/td>\n<\/tr>\n
Indian Standard<\/td>\n IS 15392:2003<\/td>\n<\/tr>\n
QCO<\/td>\n Aluminium Foil (Quality Control) Order, 2020<\/td>\n<\/tr>\n
Certification Framework<\/td>\n BIS Scheme-I<\/td>\n<\/tr>\n
Standard Mark<\/td>\n Applicable as per BIS licence<\/td>\n<\/tr>\n
Standard Status<\/td>\n Active \/ Reaffirmed 2022<\/td>\n<\/tr>\n
Original Scope<\/td>\n 0.011 mm to 0.075 mm<\/td>\n<\/tr>\n
Current Amended Upper Limit<\/td>\n 0.100 mm<\/td>\n<\/tr>\n
Amendment<\/td>\n Amendment No. 1, April 2022<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
BIS’s official standard record and amendment document support the current standard and amended thickness range.<\/p>\n
\n
\n<\/div>\n
Who Needs BIS Certification?<\/h1>\n
BIS certification can be relevant to manufacturers producing covered aluminium and aluminium alloy bare foil for food packaging.<\/p>\n
This may include:<\/p>\n
\n
Aluminium Foil Manufacturers<\/li>\n
Aluminium Foil Rolling Mills<\/li>\n
Aluminium Foil Converters<\/li>\n
Aluminium Packaging Material Manufacturers<\/li>\n
Food Packaging Foil Manufacturers<\/li>\n
Aluminium Alloy Foil Manufacturers<\/li>\n
Packaging Material Manufacturers<\/li>\n
Export-oriented Manufacturers<\/li>\n
OEM Manufacturers<\/li>\n
Eligible Foreign Manufacturers<\/li>\n<\/ul>\n
The actual applicability should be confirmed based on the product, manufacturing process and current QCO scope.<\/p>\n
\n
\n<\/div>\n
Eligibility Criteria<\/h1>\n
A manufacturer seeking BIS certification should generally have:<\/p>\n
\n
Suitable manufacturing premises<\/li>\n
Aluminium foil production facilities<\/li>\n
Appropriate rolling\/annealing facilities<\/li>\n
Quality-control arrangements<\/li>\n
Testing facilities or applicable testing arrangements<\/li>\n
Calibrated measuring equipment<\/li>\n
Qualified technical personnel<\/li>\n
Raw-material control system<\/li>\n
Production process documentation<\/li>\n
Finished-product inspection system<\/li>\n
Batch\/control-unit records<\/li>\n
Product specifications<\/li>\n
Required BIS documentation<\/li>\n<\/ul>\n
The BIS Product Manual provides guidance on raw material, sampling, product grouping, test equipment and Scheme of Inspection and Testing.<\/p>\n
\n
\n<\/div>\n
Raw Material Requirements<\/h1>\n
The BIS Product Manual states that the raw material should conform to specified chemical-composition requirements of relevant grades of IS 737<\/strong>.<\/p>\n
It also specifies that the material is to be supplied in fully annealed ‘O’ temper<\/strong> for the applicable certification framework.<\/p>\n
Therefore, manufacturers should maintain appropriate:<\/p>\n
\n
Raw-material specifications<\/li>\n
Supplier certificates<\/li>\n
Chemical composition records<\/li>\n
Incoming inspection records<\/li>\n
Batch traceability<\/li>\n
Material test reports<\/li>\n<\/ul>\n
\n
\n<\/div>\n
Complete BIS Certification Process<\/h1>\n
Step 1 \u2013 Product Applicability Assessment<\/h2>\n
Identify whether the product falls under:<\/p>\n
IS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging.<\/strong><\/p>\n
Step 2 \u2013 Product Specification Review<\/h2>\n
Review:<\/p>\n
\n
Alloy\/grade<\/li>\n
Thickness<\/li>\n
Width<\/li>\n
Length<\/li>\n
Form<\/li>\n
Surface condition<\/li>\n
Annealing condition<\/li>\n<\/ul>\n
Step 3 \u2013 Product Grouping<\/h2>\n
Determine the applicable product grouping according to the BIS Product Manual.<\/p>\n
Step 4 \u2013 Factory Readiness<\/h2>\n
Assess:<\/p>\n
\n
Production machinery<\/li>\n
Testing equipment<\/li>\n
Quality-control system<\/li>\n
Raw-material control<\/li>\n
Calibration<\/li>\n
Manufacturing process<\/li>\n<\/ul>\n
Step 5 \u2013 Documentation<\/h2>\n
Prepare all required technical and legal documents.<\/p>\n
Step 6 \u2013 Sample Preparation<\/h2>\n
Prepare samples according to BIS sampling requirements.<\/p>\n
The Product Manual specifies a sample size of three 20-metre coils<\/strong> for the referenced sampling arrangement.<\/p>\n
Step 7 \u2013 Product Testing<\/h2>\n
Conduct the applicable tests against IS 15392.<\/p>\n
Step 8 \u2013 BIS Application<\/h2>\n
Submit the application through the applicable BIS process.<\/p>\n
Step 9 \u2013 Application Scrutiny<\/h2>\n
BIS reviews the application and supporting documents.<\/p>\n
Step 10 \u2013 Factory Inspection<\/h2>\n
BIS assesses the manufacturing and quality-control facilities.<\/p>\n
Step 11 \u2013 Sample \/ Test Verification<\/h2>\n
Applicable test results and production controls are evaluated.<\/p>\n
Step 12 \u2013 Observation Closure<\/h2>\n
Any BIS observations must be addressed.<\/p>\n
Step 13 \u2013 Grant of Licence<\/h2>\n
After successful completion of applicable requirements, BIS may grant the licence.<\/p>\n
Step 14 \u2013 Standard Mark Compliance<\/h2>\n
The manufacturer follows applicable BIS marking requirements.<\/p>\n
Step 15 \u2013 Continuous Compliance<\/h2>\n
The manufacturer maintains ongoing conformity through inspection, testing and quality-control procedures.<\/p>\n
\n
\n<\/div>\n
Required Documents<\/h1>\n
Common documents can include:<\/p>\n
\n
Company registration documents<\/li>\n
Factory registration documents<\/li>\n
Factory address proof<\/li>\n
Manufacturing process flow chart<\/li>\n
Factory layout<\/li>\n
Machinery list<\/li>\n
Testing equipment list<\/li>\n
Calibration certificates<\/li>\n
Product specifications<\/li>\n
Product drawings<\/li>\n
Alloy\/grade details<\/li>\n
Raw-material specifications<\/li>\n
Raw-material test certificates<\/li>\n
Chemical composition reports<\/li>\n
Quality-control plan<\/li>\n
Internal test reports<\/li>\n
Finished-product inspection records<\/li>\n
Product marking details<\/li>\n
Packaging details<\/li>\n
Trademark documents<\/li>\n
Authorized signatory documents<\/li>\n
Manufacturing records<\/li>\n
Applicable declarations and undertakings<\/li>\n
BIS application documents<\/li>\n<\/ul>\n
The exact document list should be finalized according to the current BIS application requirements.<\/p>\n
\n
\n<\/div>\n
Testing Requirements Under IS 15392<\/h1>\n
Testing is a critical component of BIS certification for aluminium foil.<\/p>\n
BIS laboratory listings currently show testing facilities for IS 15392 and identify tests including pinhole count, freedom from defects, material, preferred thickness, average thickness, surface condition, dimensions and tolerances and tensile properties.<\/p>\n
Important testing areas include:<\/h3>\n
1. Pinhole Count<\/h2>\n
The foil is checked for permissible pinholes according to the standard.<\/p>\n
2. Freedom from Defects<\/h2>\n
The product is assessed for applicable surface\/product defects.<\/p>\n
3. Chemical Composition<\/h2>\n
Applicable alloying elements and chemical-composition requirements are evaluated.<\/p>\n
BIS laboratory listings include parameters such as:<\/p>\n
\n
Copper<\/li>\n
Magnesium<\/li>\n
Silicon<\/li>\n
Iron<\/li>\n
Manganese<\/li>\n
Zinc<\/li>\n
Titanium<\/li>\n
Chromium<\/li>\n<\/ul>\n
and applicable combined-element requirements.<\/p>\n
4. Thickness<\/h2>\n
Testing can include:<\/p>\n
\n
Preferred thickness<\/li>\n
Average thickness<\/li>\n<\/ul>\n
5. Width<\/h2>\n
The foil width is checked against applicable dimensional tolerances.<\/p>\n
6. Length<\/h2>\n
Applicable length requirements are verified.<\/p>\n
7. Surface Condition<\/h2>\n
Surface characteristics are evaluated according to the standard.<\/p>\n
8. Tensile Properties<\/h2>\n
Tensile\/breaking-load requirements are evaluated according to the applicable provisions.<\/p>\n
BIS LIMS identifies tensile-property testing with reference to IS 13237<\/strong> for IS 15392 testing.<\/p>\n
9. Lubricants<\/h2>\n
Applicable requirements relating to lubricants are also addressed.<\/p>\n
\n
\n<\/div>\n
Factory Inspection Process<\/h1>\n
During BIS factory assessment, the manufacturer may need to demonstrate control over:<\/p>\n
Raw Material<\/h3>\n
\n
Aluminium ingots\/slabs<\/li>\n
Aluminium alloy material<\/li>\n
Chemical composition<\/li>\n
Supplier control<\/li>\n
Incoming inspection<\/li>\n<\/ul>\n
Production<\/h3>\n
\n
Rolling<\/li>\n
Annealing<\/li>\n
Slitting<\/li>\n
Cutting<\/li>\n
Finishing<\/li>\n
Packaging<\/li>\n<\/ul>\n
Testing<\/h3>\n
\n
Thickness measurement<\/li>\n
Width measurement<\/li>\n
Surface inspection<\/li>\n
Chemical analysis<\/li>\n
Tensile testing<\/li>\n
Pinhole testing<\/li>\n
Other applicable tests<\/li>\n<\/ul>\n
Quality Control<\/h3>\n
\n
Incoming inspection<\/li>\n
In-process inspection<\/li>\n
Finished-product inspection<\/li>\n
Batch records<\/li>\n
Rejection records<\/li>\n
Corrective actions<\/li>\n
Calibration<\/li>\n<\/ul>\n
Traceability<\/h3>\n
The manufacturer should maintain appropriate traceability between:<\/p>\n
Raw Material \u2192 Production Batch \u2192 Testing \u2192 Finished Product \u2192 Dispatch<\/strong><\/p>\n
\n
\n<\/div>\n
Sampling Requirements<\/h1>\n
The BIS Product Manual provides specific sampling guidance.<\/p>\n
For IS 15392 certification, the Product Manual identifies:<\/p>\n
Sample Size: 20 metre coils \u2013 3 Nos.<\/strong><\/p>\n
It also provides product-grouping guidelines through its annexure.<\/p>\n
The manufacturer should therefore plan samples according to the proposed licence scope and applicable grouping requirements.<\/p>\n
\n
\n<\/div>\n
Product Grouping<\/h1>\n
Product grouping can be important for manufacturers with multiple:<\/p>\n
\n
Grades<\/li>\n
Thicknesses<\/li>\n
Widths<\/li>\n
Forms<\/li>\n
Surface conditions<\/li>\n<\/ul>\n
The BIS Product Manual provides grouping guidance in its annexure.<\/p>\n
Proper grouping can help the manufacturer structure the BIS application and certification scope more efficiently.<\/p>\n
\n
\n<\/div>\n
Common Reasons for BIS Certification Rejection<\/h1>\n
Common compliance issues may include:<\/p>\n
\n
Incorrect standard identification<\/li>\n
Wrong product scope<\/li>\n
Incomplete documents<\/li>\n
Incorrect product grouping<\/li>\n
Failed chemical composition test<\/li>\n
Failed thickness test<\/li>\n
Failed tensile test<\/li>\n
Excessive pinholes<\/li>\n
Surface defects<\/li>\n
Dimensional non-conformity<\/li>\n
Inadequate testing equipment<\/li>\n
Calibration issues<\/li>\n
Poor raw-material control<\/li>\n
Incomplete production records<\/li>\n
Inadequate quality-control procedures<\/li>\n
Incorrect sample preparation<\/li>\n
Incomplete BIS application<\/li>\n
Factory inspection observations<\/li>\n
Incorrect product marking<\/li>\n
Failure to close BIS observations<\/li>\n<\/ul>\n
\n
\n<\/div>\n
BIS Certification Cost for Aluminium Foil<\/h1>\n
There is no universal fixed cost for BIS certification of aluminium foil.<\/p>\n
The total cost can depend on:<\/p>\n
\n
BIS application fees<\/li>\n
Product testing<\/li>\n
Number of product groups<\/li>\n
Number of grades<\/li>\n
Number of thicknesses<\/li>\n
Laboratory charges<\/li>\n
Factory inspection<\/li>\n
Testing equipment<\/li>\n
Calibration<\/li>\n
Documentation<\/li>\n
Consultancy<\/li>\n
Re-testing, if applicable<\/li>\n<\/ul>\n
BIS LIMS currently provides laboratory-specific testing charges for IS 15392 and shows individual charges for several tests. Therefore, actual testing cost depends on the laboratory and testing scope.<\/p>\n
A product-specific quotation is therefore more accurate than publishing a single generic certification price.<\/p>\n
\n
\n<\/div>\n
BIS Certification Timeline<\/h1>\n
The timeline can vary according to:<\/p>\n
\n
Product scope<\/li>\n
Number of grades<\/li>\n
Product grouping<\/li>\n
Testing requirements<\/li>\n
Laboratory availability<\/li>\n
Factory readiness<\/li>\n
Documentation<\/li>\n
BIS scrutiny<\/li>\n
Factory inspection<\/li>\n
Test results<\/li>\n
Technical observations<\/li>\n
Re-testing<\/li>\n<\/ul>\n
Manufacturers can reduce avoidable delays by preparing the factory, testing system and documents before submitting the application.<\/p>\n
\n
\n<\/div>\n
Benefits of BIS Certification<\/h1>\n
Regulatory Compliance<\/h2>\n
Helps manufacturers comply with applicable mandatory BIS requirements.<\/p>\n
Product Quality<\/h2>\n
Encourages consistent control of aluminium foil specifications.<\/p>\n
Food Packaging Market Acceptance<\/h2>\n
BIS certification supports compliance for covered food-packaging foil products.<\/p>\n
Customer Confidence<\/h2>\n
Certification can increase confidence among customers and buyers.<\/p>\n
Quality Control<\/h2>\n
The certification process encourages systematic testing and inspection.<\/p>\n
Better Manufacturing Practices<\/h2>\n
Manufacturers establish documented production and quality-control processes.<\/p>\n
Market Credibility<\/h2>\n
The applicable BIS Standard Mark can strengthen product credibility when used according to the licence conditions.<\/p>\n
\n
\n<\/div>\n
Why Choose Qualitance India?<\/h1>\n
Qualitance India<\/strong> provides professional BIS Certification Consultancy for aluminium foil manufacturers and packaging-material manufacturers.<\/p>\n
Our Services Include:<\/h3>\n
\u2713 Product Applicability Assessment
\n\u2713 IS 15392 Requirement Guidance
\n\u2713 Product Scope & Grouping Support
\n\u2713 BIS Documentation Support
\n\u2713 Testing Coordination
\n\u2713 Laboratory Coordination
\n\u2713 Sample Preparation Guidance
\n\u2713 BIS Application Assistance
\n\u2713 Factory Inspection Preparation
\n\u2713 Quality-Control Documentation
\n\u2713 Technical Query Assistance
\n\u2713 ISI Mark Compliance Guidance
\n\u2713 End-to-End BIS Certification Support<\/p>\n
Contact Qualitance India<\/h3>\n
Phone:<\/strong> +91-9310-615-170
\nEmail:<\/strong> info@qualitanceindia.com<\/a>
\nWebsite:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
Qualitance India \u2013 Improving Quality and Competence<\/strong><\/p>\n
\n
\n<\/div>\n
Step-by-Step BIS Certification Flow Chart<\/h1>\n
Product Identification<\/strong>
\n\u2193
\nIS 15392 Applicability Check<\/strong>
\n\u2193
\nGrade & Alloy Identification<\/strong>
\n\u2193
\nThickness \/ Width \/ Form Identification<\/strong>
\n\u2193
\nProduct Grouping<\/strong>
\n\u2193
\nFactory Readiness Assessment<\/strong>
\n\u2193
\nDocumentation Preparation<\/strong>
\n\u2193
\nSample Preparation<\/strong>
\n\u2193
\nProduct Testing<\/strong>
\n\u2193
\nBIS Application Submission<\/strong>
\n\u2193
\nApplication Scrutiny<\/strong>
\n\u2193
\nFactory Inspection<\/strong>
\n\u2193
\nTechnical Observation Closure<\/strong>
\n\u2193
\nBIS Licence Grant<\/strong>
\n\u2193
\nStandard Mark Compliance<\/strong>
\n\u2193
\nContinuous Inspection & Testing<\/strong><\/p>\n
\n
\n<\/div>\n
25 SEO FAQs<\/h1>\n
1. What is BIS Certification for Aluminium Foil?<\/h2>\n
BIS Certification for Aluminium Foil is the conformity-assessment process for covered aluminium and aluminium alloy bare foil products to demonstrate compliance with IS 15392 and applicable QCO requirements.<\/p>\n
2. Is BIS Certification mandatory for aluminium foil used for food packaging?<\/h2>\n
Covered aluminium and aluminium alloy bare foil for food packaging is listed by BIS under the Aluminium Foil (Quality Control) Order, 2020.<\/p>\n
3. What is IS 15392?<\/h2>\n
IS 15392:2003 is the Indian Standard for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification.<\/p>\n
4. What is the thickness range under IS 15392?<\/h2>\n
The original standard scope covered 0.011 mm to 0.075 mm. Amendment No. 1, April 2022, extended the upper limit to 0.100 mm.<\/p>\n
5. Is IS 15392 still active?<\/h2>\n
Yes. The BIS standard record identifies IS 15392:2003 as active and reaffirmed in 2022.<\/p>\n
6. What products are covered under IS 15392?<\/h2>\n
The standard covers annealed aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n
7. Are aluminium foil coils covered?<\/h2>\n
Yes. The BIS Product Manual includes coil as one of the product forms within the certification scope.<\/p>\n
8. Are aluminium foil sheets covered?<\/h2>\n
Sheet form is also identified within the Product Manual’s licence-scope parameters.<\/p>\n
9. What tests are required for IS 15392?<\/h2>\n
Testing can include pinhole count, freedom from defects, material\/chemical composition, thickness, dimensions, surface condition and tensile properties, depending on the applicable requirements.<\/p>\n
10. Is chemical composition testing required?<\/h2>\n
Yes, applicable material and chemical-composition requirements form part of IS 15392 testing.<\/p>\n
11. What aluminium grades are relevant?<\/h2>\n
The BIS Product Manual refers to applicable grades of IS 737, including specified grades such as G 19000, G 19500, G 19600, G 31000 and G 40800.<\/p>\n
12. What is the sample size for BIS testing?<\/h2>\n
The Product Manual identifies three 20-metre coils<\/strong> under the stated sampling arrangement.<\/p>\n
13. Is factory inspection required?<\/h2>\n
Factory assessment forms part of the applicable BIS certification process under Scheme-I.<\/p>\n
14. Who needs BIS Certification for aluminium foil?<\/h2>\n
Manufacturers producing covered aluminium and aluminium alloy bare foil for food packaging may require BIS certification under the applicable QCO.<\/p>\n
15. Can a trader obtain a BIS manufacturing licence?<\/h2>\n
BIS certification is generally linked to the manufacturer and manufacturing premises rather than simply the trader or distributor.<\/p>\n
16. What documents are required for IS 15392 certification?<\/h2>\n
Documents can include factory details, manufacturing process, machinery, testing equipment, calibration records, product specifications, raw-material records, quality-control documents and product marking details.<\/p>\n
17. How much does BIS certification for aluminium foil cost?<\/h2>\n
The cost depends on the product scope, testing requirements, laboratory charges, inspection, documentation and other applicable certification expenses.<\/p>\n
18. How long does BIS certification take?<\/h2>\n
The timeline depends on factory readiness, testing, documentation, BIS scrutiny, inspection and closure of observations.<\/p>\n
19. What is Aluminium Foil QCO 2020?<\/h2>\n
The Aluminium Foil (Quality Control) Order, 2020 is the regulatory order under which covered aluminium foil products are subject to compulsory BIS certification.<\/p>\n
20. What is pinhole testing in aluminium foil?<\/h2>\n
Pinhole testing evaluates the foil for the presence of pinholes according to the applicable requirements of IS 15392.<\/p>\n
21. What is freedom-from-defects testing?<\/h2>\n
It is the evaluation of the foil for applicable visible\/product defects specified by the standard.<\/p>\n
22. Is tensile testing required?<\/h2>\n
Applicable tensile properties are part of the IS 15392 testing framework. BIS laboratory listings identify tensile-property testing for the standard.<\/p>\n
23. Does IS 15392 specify surface condition?<\/h2>\n
Yes. Surface condition is among the product characteristics covered in the BIS testing and licensing framework.<\/p>\n
24. Is ISI Mark required for BIS-certified aluminium foil?<\/h2>\n
Where the applicable compulsory certification framework requires the Standard Mark, the manufacturer must comply with the BIS licence and applicable marking requirements.<\/p>\n
25. How can I get BIS Certification for aluminium foil?<\/h2>\n
Start by confirming product applicability, grade, thickness, form and scope; then prepare the factory and documents, conduct applicable testing, submit the BIS application, complete factory assessment and satisfy all applicable BIS requirements.<\/p>\n
\n
\n<\/div>\n
FAQ Schema Content<\/h1>\n
Recommended Schema Type:<\/strong> FAQPage<\/p>\n
Use the 25 FAQs above as visible FAQ content on the webpage and create matching FAQ structured data.<\/p>\n
The FAQ answers in the structured data should match the visible webpage answers.<\/p>\n
\n
\n<\/div>\n
Service Schema Suggestion<\/h1>\n
Schema Type:<\/strong> Service<\/p>\n
Service Name:<\/strong> BIS Certification Consultancy for Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/p>\n
Service Type:<\/strong> BIS Certification Consultancy<\/p>\n
Provider:<\/strong> Qualitance India<\/p>\n
Area Served:<\/strong> India<\/p>\n
Description:<\/strong> BIS certification consultancy for aluminium and aluminium alloy bare foil manufacturers as per IS 15392, including product applicability, documentation, testing coordination, BIS application and factory inspection support.<\/p>\n
\n
\n<\/div>\n
Organization Schema Suggestion<\/h1>\n
Schema Type:<\/strong> Organization<\/p>\n
Organization Name:<\/strong> Qualitance India<\/p>\n
Tagline:<\/strong> Improving Quality and Competence<\/p>\n
Telephone:<\/strong> +91-9310-615-170<\/p>\n
Email:<\/strong> info@qualitanceindia.com<\/a><\/p>\n
Website:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
\n
\n<\/div>\n
Breadcrumb Schema Suggestion<\/h1>\n
Home<\/strong>
\n\u2192 BIS Certification<\/strong>
\n\u2192 Aluminium Foil Certification<\/strong>
\n\u2192 Food Packaging Foil<\/strong>
\n\u2192 IS 15392<\/strong><\/p>\n
\n
\n<\/div>\n
Article Schema Suggestion<\/h1>\n
Schema Type:<\/strong> Article \/ BlogPosting<\/p>\n
Headline:<\/strong> BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 IS 15392:2003<\/p>\n
Author:<\/strong> Qualitance India<\/p>\n
Publisher:<\/strong> Qualitance India<\/p>\n
Article Section:<\/strong> BIS Certification \/ Aluminium Packaging<\/p>\n
Keywords:<\/strong> BIS Certification for Aluminium Foil, IS 15392, Aluminium Foil BIS Licence, Food Packaging Foil Certification<\/p>\n
\n
\n<\/div>\n
Image ALT Tags \u2013 15<\/h1>\n
\n
BIS Certification for Aluminium Foil<\/li>\n
IS 15392 BIS Certification<\/li>\n
Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/li>\n
BIS Licence for Aluminium Foil Manufacturer<\/li>\n
Aluminium Foil BIS Certification India<\/li>\n
IS 15392 Aluminium Foil Testing<\/li>\n
Food Packaging Aluminium Foil Certification<\/li>\n
Aluminium Foil Quality Control Order 2020<\/li>\n
BIS Testing for Aluminium Foil<\/li>\n
BIS Factory Inspection Aluminium Foil<\/li>\n
Aluminium Foil ISI Mark Certification<\/li>\n
Aluminium Alloy Bare Foil BIS Certification<\/li>\n
Food Packaging Foil BIS Licence<\/li>\n
IS 15392 Testing Laboratory<\/li>\n
Qualitance India BIS Certification Consultancy<\/li>\n<\/ol>\n
\n
\n<\/div>\n
Internal Linking Strategy<\/h1>\n
Is blog ko website ke relevant pages se internally link karein.<\/p>\n
Recommended Internal Links<\/h3>\n
\n
BIS Certification Consultancy<\/li>\n
BIS Certification Process<\/li>\n
BIS Certification Cost<\/li>\n
BIS Certification Documents<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection<\/li>\n
BIS ISI Mark Certification<\/li>\n
BIS QCO Services<\/li>\n
BIS Certification for Packaging Products<\/li>\n
BIS Certification for Aluminium Products<\/li>\n
BIS Certification for Food Packaging Materials<\/li>\n
Testing Laboratory Coordination<\/li>\n<\/ul>\n
Recommended Anchor Text<\/h3>\n
\n
BIS Certification Process<\/li>\n
BIS Certification Cost<\/li>\n
BIS Certification Documents<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection<\/li>\n
BIS ISI Mark Certification<\/li>\n
BIS QCO Compliance<\/li>\n
Food Packaging BIS Certification<\/li>\n
Aluminium Product BIS Certification<\/li>\n<\/ul>\n
\n
\n<\/div>\n
External Authority References \u2013 BIS\/QCO<\/h1>\n
For E-E-A-T and compliance credibility, official BIS sources ko primary references rakhein:<\/p>\n
\n
BIS Scheme-I \/ Compulsory Certification List<\/li>\n
BIS Product Manual for IS 15392<\/li>\n
BIS Standard Record for IS 15392:2003<\/li>\n
BIS Amendment No. 1 \u2013 April 2022<\/li>\n
BIS LIMS \u2013 IS 15392 Testing Scope<\/li>\n
Aluminium Foil (Quality Control) Order, 2020<\/li>\n
BIS Scheme of Inspection and Testing<\/li>\n<\/ol>\n
BIS’s current compulsory-certification listing specifically places IS 15392 under the Aluminium Foil QCO 2020.<\/p>\n
\n
\n<\/div>\n
Related BIS Services<\/h1>\n
\n
BIS Certification for Aluminium Foil<\/li>\n
BIS Certification for Aluminium Products<\/li>\n
BIS Certification for Food Packaging Materials<\/li>\n
BIS Certification for Packaging Products<\/li>\n
BIS ISI Mark Certification<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection Assistance<\/li>\n
BIS Documentation Support<\/li>\n
BIS Application Assistance<\/li>\n
BIS QCO Compliance<\/li>\n
BIS Testing Coordination<\/li>\n
BIS Certification Consultancy<\/li>\n<\/ul>\n
\n
\n<\/div>\n
Related Blog Suggestions<\/h1>\n
\n
BIS Certification for Aluminium Foil \u2013 Complete Guide<\/li>\n
IS 15392:2003 \u2013 Complete Guide for Aluminium Foil Manufacturers<\/li>\n
Aluminium Foil Quality Control Order 2020 Explained<\/li>\n
BIS Certification Process for Aluminium Foil<\/li>\n
BIS Certification Cost for Aluminium Foil<\/li>\n
Documents Required for Aluminium Foil BIS Certification<\/li>\n
IS 15392 Testing Requirements<\/li>\n
Aluminium Foil Pinhole Testing<\/li>\n
Aluminium Foil Chemical Composition Testing<\/li>\n
Aluminium Foil Tensile Strength Testing<\/li>\n
Aluminium Foil Thickness Testing<\/li>\n
Aluminium Foil Surface Condition Testing<\/li>\n
BIS Factory Inspection for Aluminium Foil Manufacturers<\/li>\n
BIS Licence for Aluminium Foil Manufacturers<\/li>\n
ISI Mark Requirements for Aluminium Foil<\/li>\n
BIS Certification for Food Packaging Materials<\/li>\n
BIS Certification for Aluminium Packaging Products<\/li>\n
BIS Certification for Aluminium Alloy Products<\/li>\n
Aluminium Foil Product Grouping for BIS Certification<\/li>\n
Common Reasons for Aluminium Foil BIS Application Rejection<\/li>\n
BIS Testing Laboratory for IS 15392<\/li>\n
How to Prepare Factory for BIS Inspection<\/li>\n
BIS Certification for Packaging Material Manufacturers<\/li>\n
BIS Certification for Food Contact Packaging Products<\/li>\n
BIS Compliance Guide for Aluminium Foil Manufacturers<\/li>\n<\/ol>\n
\n
\n<\/div>\n
Strong Lead Generation CTA<\/h1>\n
Need BIS Certification for Aluminium Foil?<\/h2>\n
Are you an Aluminium Foil Manufacturer, Aluminium Alloy Foil Manufacturer, Food Packaging Foil Manufacturer or Packaging Material Manufacturer<\/strong> looking for BIS certification support?<\/p>\n
Qualitance India<\/strong> can assist you with:<\/p>\n
\u2713 IS 15392 Applicability Assessment
\n\u2713 Product Scope Identification
\n\u2713 Grade & Thickness Assessment
\n\u2713 Product Grouping Support
\n\u2713 BIS Documentation
\n\u2713 Testing Coordination
\n\u2713 Laboratory Coordination
\n\u2713 Sample Preparation Guidance
\n\u2713 BIS Application Assistance
\n\u2713 Factory Inspection Preparation
\n\u2713 Quality-Control Documentation
\n\u2713 Technical Query Support
\n\u2713 ISI Mark Compliance
\n\u2713 End-to-End BIS Certification Consultancy<\/p>\n
Get Expert BIS Certification Support<\/h3>\n
Call \/ WhatsApp:<\/strong> +91-9310-615-170
\nEmail:<\/strong> info@qualitanceindia.com<\/a>
\nWebsite:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
Qualitance India \u2013 Improving Quality and Competence<\/strong><\/p>\n
\n
\n<\/div>\n
SEO-Optimized Conclusion<\/h1>\n
BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging<\/strong> is an important mandatory compliance requirement for covered products under the Aluminium Foil (Quality Control) Order, 2020<\/strong>. BIS’s current compulsory-certification listing identifies IS 15392<\/strong> for aluminium and aluminium alloy bare foil for food packaging.<\/p>\n
IS 15392:2003<\/strong> specifies requirements for annealed aluminium and aluminium alloy bare foil used for food packaging. The standard addresses important parameters such as material, chemical composition, thickness, dimensions, pinhole count, freedom from defects, surface condition and tensile properties.<\/p>\n
The standard was reaffirmed in 2022, and its 2022 amendment extended the upper thickness limit to 0.100 mm (100 \u00b5m)<\/strong>. Manufacturers should therefore use the current standard together with applicable amendments while determining their certification scope.<\/p>\n
The BIS certification process generally involves product applicability assessment, product grouping, documentation, sampling, testing, BIS application, factory inspection and ongoing quality-control compliance.<\/p>\n
With professional support from Qualitance India<\/strong>, manufacturers can receive end-to-end assistance for documentation, testing coordination, BIS application, factory inspection preparation and compliance requirements.<\/p>\n
\n
\n<\/div>\n
\n
\n
\n<\/div>\n
\n
\n<\/div>\n
Table of Contents<\/h1>\n
\n
Introduction<\/li>\n
About the Product<\/li>\n
What is BIS Certification?<\/li>\n
What is IS 15392?<\/li>\n
Scope of IS 15392<\/li>\n
Products Covered<\/li>\n
Aluminium Foil Forms<\/li>\n
Surface Conditions<\/li>\n
Aluminium Foil QCO 2020<\/li>\n
Applicable QCO Details<\/li>\n
Who Needs BIS Certification?<\/li>\n
Eligibility Criteria<\/li>\n
Raw Material Requirements<\/li>\n
Complete BIS Certification Process<\/li>\n
Required Documents<\/li>\n
Testing Requirements<\/li>\n
Factory Inspection<\/li>\n
Sampling Requirements<\/li>\n
Product Grouping<\/li>\n
Common Reasons for Rejection<\/li>\n
BIS Certification Cost<\/li>\n
BIS Certification Timeline<\/li>\n
Benefits<\/li>\n
Why Choose Qualitance India?<\/li>\n
FAQs<\/li>\n
Conclusion<\/li>\n<\/ul>\n
\n
\n<\/div>\n
\n
\n<\/div>\n
Featured Snippet Optimized Answers<\/h1>\n
What is BIS Certification for Aluminium Foil?<\/h3>\n
BIS Certification for Aluminium Foil is the conformity-assessment process for covered aluminium and aluminium alloy bare foil used for food packaging. BIS currently lists IS 15392 under the Aluminium Foil (Quality Control) Order, 2020.<\/strong><\/p>\n
What is IS 15392?<\/h3>\n
IS 15392:2003 is the Indian Standard titled \u201cAluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification.\u201d It specifies requirements for annealed aluminium and aluminium alloy bare foil intended for food packaging.<\/strong><\/p>\n
What is the thickness range of IS 15392?<\/h3>\n
The original IS 15392 scope covered foil from 0.011 mm to 0.075 mm. Amendment No. 1 issued in April 2022 extended the upper limit to 0.100 mm and added preferred thicknesses of 80, 90 and 100 \u00b5m.<\/strong><\/p>\n
What tests are required under IS 15392?<\/h3>\n
Applicable tests include pinhole count, freedom from defects, material\/chemical composition, thickness, dimensions, surface condition and tensile properties. The exact testing scope depends on the applicable product requirements.<\/strong><\/p>\n
Is BIS certification mandatory for food packaging aluminium foil?<\/h3>\n
Covered aluminium and aluminium alloy bare foil for food packaging is listed by BIS under the Aluminium Foil (Quality Control) Order, 2020, making applicable BIS certification a mandatory compliance requirement for covered products.<\/strong><\/p>\n
How do I get BIS Certification for Aluminium Foil?<\/h3>\n
First confirm IS 15392 applicability and product scope, then prepare product grouping, factory facilities and documents, conduct required testing, submit the BIS application, complete factory assessment and fulfil applicable BIS requirements before using the Standard Mark.<\/strong><\/p>\n
\n
\n<\/div>\n","protected":false},"excerpt":{"rendered":"
Introduction BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging is a mandatory compliance requirement for products covered under the Aluminium Foil (Quality Control) Order, 2020. BIS’s current compulsory-certification listing identifies IS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging under this QCO. The applicable Indian Standard is IS […]<\/p>\n","protected":false},"author":1,"featured_media":3392,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 IS 15392:2003 - Qualitance India","description":"Introduction BIS Certification for Aluminium and Aluminium Alloy Bare Foil for Food Packaging is a mandatory compliance requirement for products covered under t"},"_slim_seo_primary_term_category":0,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3391","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3391","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=3391"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3391\/revisions"}],"predecessor-version":[{"id":3393,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3391\/revisions\/3393"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/3392"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=3391"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=3391"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=3391"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}

Aluminium Foil Forms Covered Under BIS<\/h1>\nThe Product Manual specifically refers to product forms such as:<\/p>\n

Coil<\/h3>\nAluminium foil supplied in coil form for further packaging or converting applications.<\/p>\n

Complete BIS Certification Process<\/h1>\n

Step 1 \u2013 Product Applicability Assessment<\/h2>\nIdentify whether the product falls under:<\/p>\nIS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging.<\/strong><\/p>\n

Step 3 \u2013 Product Grouping<\/h2>\nDetermine the applicable product grouping according to the BIS Product Manual.<\/p>\n

Step 5 \u2013 Documentation<\/h2>\nPrepare all required technical and legal documents.<\/p>\n

Step 6 \u2013 Sample Preparation<\/h2>\nPrepare samples according to BIS sampling requirements.<\/p>\nThe Product Manual specifies a sample size of three 20-metre coils<\/strong> for the referenced sampling arrangement.<\/p>\n

Step 8 \u2013 BIS Application<\/h2>\nSubmit the application through the applicable BIS process.<\/p>\n

Step 9 \u2013 Application Scrutiny<\/h2>\nBIS reviews the application and supporting documents.<\/p>\n

Step 10 \u2013 Factory Inspection<\/h2>\nBIS assesses the manufacturing and quality-control facilities.<\/p>\n

Step 11 \u2013 Sample \/ Test Verification<\/h2>\nApplicable test results and production controls are evaluated.<\/p>\n

Step 12 \u2013 Observation Closure<\/h2>\nAny BIS observations must be addressed.<\/p>\n

Step 13 \u2013 Grant of Licence<\/h2>\nAfter successful completion of applicable requirements, BIS may grant the licence.<\/p>\n

Step 14 \u2013 Standard Mark Compliance<\/h2>\nThe manufacturer follows applicable BIS marking requirements.<\/p>\n

Important testing areas include:<\/h3>\n

1. Pinhole Count<\/h2>\nThe foil is checked for permissible pinholes according to the standard.<\/p>\n

2. Freedom from Defects<\/h2>\nThe product is assessed for applicable surface\/product defects.<\/p>\n

5. Width<\/h2>\nThe foil width is checked against applicable dimensional tolerances.<\/p>\n

6. Length<\/h2>\nApplicable length requirements are verified.<\/p>\n

7. Surface Condition<\/h2>\nSurface characteristics are evaluated according to the standard.<\/p>\n

8. Tensile Properties<\/h2>\nTensile\/breaking-load requirements are evaluated according to the applicable provisions.<\/p>\nBIS LIMS identifies tensile-property testing with reference to IS 13237<\/strong> for IS 15392 testing.<\/p>\n

Factory Inspection Process<\/h1>\nDuring BIS factory assessment, the manufacturer may need to demonstrate control over:<\/p>\n

Benefits of BIS Certification<\/h1>\n

Regulatory Compliance<\/h2>\nHelps manufacturers comply with applicable mandatory BIS requirements.<\/p>\n

Product Quality<\/h2>\nEncourages consistent control of aluminium foil specifications.<\/p>\n

Food Packaging Market Acceptance<\/h2>\nBIS certification supports compliance for covered food-packaging foil products.<\/p>\n

Customer Confidence<\/h2>\nCertification can increase confidence among customers and buyers.<\/p>\n

Quality Control<\/h2>\nThe certification process encourages systematic testing and inspection.<\/p>\n

Better Manufacturing Practices<\/h2>\nManufacturers establish documented production and quality-control processes.<\/p>\n

Why Choose Qualitance India?<\/h1>\nQualitance India<\/strong> provides professional BIS Certification Consultancy for aluminium foil manufacturers and packaging-material manufacturers.<\/p>\n

25 SEO FAQs<\/h1>\n

1. What is BIS Certification for Aluminium Foil?<\/h2>\nBIS Certification for Aluminium Foil is the conformity-assessment process for covered aluminium and aluminium alloy bare foil products to demonstrate compliance with IS 15392 and applicable QCO requirements.<\/p>\n

2. Is BIS Certification mandatory for aluminium foil used for food packaging?<\/h2>\nCovered aluminium and aluminium alloy bare foil for food packaging is listed by BIS under the Aluminium Foil (Quality Control) Order, 2020.<\/p>\n

3. What is IS 15392?<\/h2>\nIS 15392:2003 is the Indian Standard for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification.<\/p>\n

4. What is the thickness range under IS 15392?<\/h2>\nThe original standard scope covered 0.011 mm to 0.075 mm. Amendment No. 1, April 2022, extended the upper limit to 0.100 mm.<\/p>\n

5. Is IS 15392 still active?<\/h2>\nYes. The BIS standard record identifies IS 15392:2003 as active and reaffirmed in 2022.<\/p>\n

6. What products are covered under IS 15392?<\/h2>\nThe standard covers annealed aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n

7. Are aluminium foil coils covered?<\/h2>\nYes. The BIS Product Manual includes coil as one of the product forms within the certification scope.<\/p>\n

8. Are aluminium foil sheets covered?<\/h2>\nSheet form is also identified within the Product Manual’s licence-scope parameters.<\/p>\n

9. What tests are required for IS 15392?<\/h2>\nTesting can include pinhole count, freedom from defects, material\/chemical composition, thickness, dimensions, surface condition and tensile properties, depending on the applicable requirements.<\/p>\n

10. Is chemical composition testing required?<\/h2>\nYes, applicable material and chemical-composition requirements form part of IS 15392 testing.<\/p>\n

11. What aluminium grades are relevant?<\/h2>\nThe BIS Product Manual refers to applicable grades of IS 737, including specified grades such as G 19000, G 19500, G 19600, G 31000 and G 40800.<\/p>\n

12. What is the sample size for BIS testing?<\/h2>\nThe Product Manual identifies three 20-metre coils<\/strong> under the stated sampling arrangement.<\/p>\n

14. Who needs BIS Certification for aluminium foil?<\/h2>\nManufacturers producing covered aluminium and aluminium alloy bare foil for food packaging may require BIS certification under the applicable QCO.<\/p>\n

15. Can a trader obtain a BIS manufacturing licence?<\/h2>\nBIS certification is generally linked to the manufacturer and manufacturing premises rather than simply the trader or distributor.<\/p>\n

16. What documents are required for IS 15392 certification?<\/h2>\nDocuments can include factory details, manufacturing process, machinery, testing equipment, calibration records, product specifications, raw-material records, quality-control documents and product marking details.<\/p>\n

17. How much does BIS certification for aluminium foil cost?<\/h2>\nThe cost depends on the product scope, testing requirements, laboratory charges, inspection, documentation and other applicable certification expenses.<\/p>\n

18. How long does BIS certification take?<\/h2>\nThe timeline depends on factory readiness, testing, documentation, BIS scrutiny, inspection and closure of observations.<\/p>\n

19. What is Aluminium Foil QCO 2020?<\/h2>\nThe Aluminium Foil (Quality Control) Order, 2020 is the regulatory order under which covered aluminium foil products are subject to compulsory BIS certification.<\/p>\n

20. What is pinhole testing in aluminium foil?<\/h2>\nPinhole testing evaluates the foil for the presence of pinholes according to the applicable requirements of IS 15392.<\/p>\n

21. What is freedom-from-defects testing?<\/h2>\nIt is the evaluation of the foil for applicable visible\/product defects specified by the standard.<\/p>\n

22. Is tensile testing required?<\/h2>\nApplicable tensile properties are part of the IS 15392 testing framework. BIS laboratory listings identify tensile-property testing for the standard.<\/p>\n

23. Does IS 15392 specify surface condition?<\/h2>\nYes. Surface condition is among the product characteristics covered in the BIS testing and licensing framework.<\/p>\n

24. Is ISI Mark required for BIS-certified aluminium foil?<\/h2>\nWhere the applicable compulsory certification framework requires the Standard Mark, the manufacturer must comply with the BIS licence and applicable marking requirements.<\/p>\n

FAQ Schema Content<\/h1>\nRecommended Schema Type:<\/strong> FAQPage<\/p>\nUse the 25 FAQs above as visible FAQ content on the webpage and create matching FAQ structured data.<\/p>\nThe FAQ answers in the structured data should match the visible webpage answers.<\/p>\n

Breadcrumb Schema Suggestion<\/h1>\nHome<\/strong>\n\u2192 BIS Certification<\/strong>\n\u2192 Aluminium Foil Certification<\/strong>\n\u2192 Food Packaging Foil<\/strong>\n\u2192 IS 15392<\/strong><\/p>\n

Internal Linking Strategy<\/h1>\nIs blog ko website ke relevant pages se internally link karein.<\/p>\n

Strong Lead Generation CTA<\/h1>\n

Featured Snippet Optimized Answers<\/h1>\n

Aluminium Foil Forms Covered Under BIS<\/h1>\n
The Product Manual specifically refers to product forms such as:<\/p>\n

Coil<\/h3>\n
Aluminium foil supplied in coil form for further packaging or converting applications.<\/p>\n

Step 1 \u2013 Product Applicability Assessment<\/h2>\n
Identify whether the product falls under:<\/p>\n
IS 15392 \u2013 Aluminium and Aluminium Alloy Bare Foil for Food Packaging.<\/strong><\/p>\n

Step 3 \u2013 Product Grouping<\/h2>\n
Determine the applicable product grouping according to the BIS Product Manual.<\/p>\n

Step 5 \u2013 Documentation<\/h2>\n
Prepare all required technical and legal documents.<\/p>\n

Step 6 \u2013 Sample Preparation<\/h2>\n
Prepare samples according to BIS sampling requirements.<\/p>\n
The Product Manual specifies a sample size of three 20-metre coils<\/strong> for the referenced sampling arrangement.<\/p>\n

Step 8 \u2013 BIS Application<\/h2>\n
Submit the application through the applicable BIS process.<\/p>\n

Step 9 \u2013 Application Scrutiny<\/h2>\n
BIS reviews the application and supporting documents.<\/p>\n

Step 10 \u2013 Factory Inspection<\/h2>\n
BIS assesses the manufacturing and quality-control facilities.<\/p>\n

Step 11 \u2013 Sample \/ Test Verification<\/h2>\n
Applicable test results and production controls are evaluated.<\/p>\n

Step 12 \u2013 Observation Closure<\/h2>\n
Any BIS observations must be addressed.<\/p>\n

Step 13 \u2013 Grant of Licence<\/h2>\n
After successful completion of applicable requirements, BIS may grant the licence.<\/p>\n

Step 14 \u2013 Standard Mark Compliance<\/h2>\n
The manufacturer follows applicable BIS marking requirements.<\/p>\n

1. Pinhole Count<\/h2>\n
The foil is checked for permissible pinholes according to the standard.<\/p>\n

2. Freedom from Defects<\/h2>\n
The product is assessed for applicable surface\/product defects.<\/p>\n

5. Width<\/h2>\n
The foil width is checked against applicable dimensional tolerances.<\/p>\n

6. Length<\/h2>\n
Applicable length requirements are verified.<\/p>\n

7. Surface Condition<\/h2>\n
Surface characteristics are evaluated according to the standard.<\/p>\n

8. Tensile Properties<\/h2>\n
Tensile\/breaking-load requirements are evaluated according to the applicable provisions.<\/p>\n
BIS LIMS identifies tensile-property testing with reference to IS 13237<\/strong> for IS 15392 testing.<\/p>\n

Factory Inspection Process<\/h1>\n
During BIS factory assessment, the manufacturer may need to demonstrate control over:<\/p>\n

Regulatory Compliance<\/h2>\n
Helps manufacturers comply with applicable mandatory BIS requirements.<\/p>\n

Product Quality<\/h2>\n
Encourages consistent control of aluminium foil specifications.<\/p>\n

Food Packaging Market Acceptance<\/h2>\n
BIS certification supports compliance for covered food-packaging foil products.<\/p>\n

Customer Confidence<\/h2>\n
Certification can increase confidence among customers and buyers.<\/p>\n

Quality Control<\/h2>\n
The certification process encourages systematic testing and inspection.<\/p>\n

Better Manufacturing Practices<\/h2>\n
Manufacturers establish documented production and quality-control processes.<\/p>\n

Why Choose Qualitance India?<\/h1>\n
Qualitance India<\/strong> provides professional BIS Certification Consultancy for aluminium foil manufacturers and packaging-material manufacturers.<\/p>\n

1. What is BIS Certification for Aluminium Foil?<\/h2>\n
BIS Certification for Aluminium Foil is the conformity-assessment process for covered aluminium and aluminium alloy bare foil products to demonstrate compliance with IS 15392 and applicable QCO requirements.<\/p>\n

2. Is BIS Certification mandatory for aluminium foil used for food packaging?<\/h2>\n
Covered aluminium and aluminium alloy bare foil for food packaging is listed by BIS under the Aluminium Foil (Quality Control) Order, 2020.<\/p>\n

3. What is IS 15392?<\/h2>\n
IS 15392:2003 is the Indian Standard for Aluminium and Aluminium Alloy Bare Foil for Food Packaging \u2013 Specification.<\/p>\n

4. What is the thickness range under IS 15392?<\/h2>\n
The original standard scope covered 0.011 mm to 0.075 mm. Amendment No. 1, April 2022, extended the upper limit to 0.100 mm.<\/p>\n

5. Is IS 15392 still active?<\/h2>\n
Yes. The BIS standard record identifies IS 15392:2003 as active and reaffirmed in 2022.<\/p>\n

6. What products are covered under IS 15392?<\/h2>\n
The standard covers annealed aluminium and aluminium alloy bare foil intended for food packaging.<\/p>\n

7. Are aluminium foil coils covered?<\/h2>\n
Yes. The BIS Product Manual includes coil as one of the product forms within the certification scope.<\/p>\n

8. Are aluminium foil sheets covered?<\/h2>\n
Sheet form is also identified within the Product Manual’s licence-scope parameters.<\/p>\n

9. What tests are required for IS 15392?<\/h2>\n
Testing can include pinhole count, freedom from defects, material\/chemical composition, thickness, dimensions, surface condition and tensile properties, depending on the applicable requirements.<\/p>\n

10. Is chemical composition testing required?<\/h2>\n
Yes, applicable material and chemical-composition requirements form part of IS 15392 testing.<\/p>\n

11. What aluminium grades are relevant?<\/h2>\n
The BIS Product Manual refers to applicable grades of IS 737, including specified grades such as G 19000, G 19500, G 19600, G 31000 and G 40800.<\/p>\n

12. What is the sample size for BIS testing?<\/h2>\n
The Product Manual identifies three 20-metre coils<\/strong> under the stated sampling arrangement.<\/p>\n

14. Who needs BIS Certification for aluminium foil?<\/h2>\n
Manufacturers producing covered aluminium and aluminium alloy bare foil for food packaging may require BIS certification under the applicable QCO.<\/p>\n

15. Can a trader obtain a BIS manufacturing licence?<\/h2>\n
BIS certification is generally linked to the manufacturer and manufacturing premises rather than simply the trader or distributor.<\/p>\n

16. What documents are required for IS 15392 certification?<\/h2>\n
Documents can include factory details, manufacturing process, machinery, testing equipment, calibration records, product specifications, raw-material records, quality-control documents and product marking details.<\/p>\n

17. How much does BIS certification for aluminium foil cost?<\/h2>\n
The cost depends on the product scope, testing requirements, laboratory charges, inspection, documentation and other applicable certification expenses.<\/p>\n

18. How long does BIS certification take?<\/h2>\n
The timeline depends on factory readiness, testing, documentation, BIS scrutiny, inspection and closure of observations.<\/p>\n

19. What is Aluminium Foil QCO 2020?<\/h2>\n
The Aluminium Foil (Quality Control) Order, 2020 is the regulatory order under which covered aluminium foil products are subject to compulsory BIS certification.<\/p>\n

20. What is pinhole testing in aluminium foil?<\/h2>\n
Pinhole testing evaluates the foil for the presence of pinholes according to the applicable requirements of IS 15392.<\/p>\n

21. What is freedom-from-defects testing?<\/h2>\n
It is the evaluation of the foil for applicable visible\/product defects specified by the standard.<\/p>\n

22. Is tensile testing required?<\/h2>\n
Applicable tensile properties are part of the IS 15392 testing framework. BIS laboratory listings identify tensile-property testing for the standard.<\/p>\n

23. Does IS 15392 specify surface condition?<\/h2>\n
Yes. Surface condition is among the product characteristics covered in the BIS testing and licensing framework.<\/p>\n

24. Is ISI Mark required for BIS-certified aluminium foil?<\/h2>\n
Where the applicable compulsory certification framework requires the Standard Mark, the manufacturer must comply with the BIS licence and applicable marking requirements.<\/p>\n

Internal Linking Strategy<\/h1>\n
Is blog ko website ke relevant pages se internally link karein.<\/p>\n