{"id":3415,"date":"2026-08-13T11:21:09","date_gmt":"2026-08-13T11:21:09","guid":{"rendered":"https:\/\/qualitanceindia.com\/?p=3415"},"modified":"2026-08-13T11:21:13","modified_gmt":"2026-08-13T11:21:13","slug":"bis-certification-for-flat-transparent-sheet-glass-is-28351987","status":"publish","type":"post","link":"https:\/\/qualitanceindia.com\/bis-certification-for-flat-transparent-sheet-glass-is-28351987\/","title":{"rendered":"BIS Certification for Flat Transparent Sheet Glass \u2013 IS 2835:1987"},"content":{"rendered":"

\n

\n

\n

\n

Introduction<\/h1>\n
BIS Certification for Flat Transparent Sheet Glass<\/strong> is a mandatory compliance requirement for covered products in India. The applicable Indian Standard is IS 2835:1987 \u2013 Specification for Flat Transparent Sheet Glass<\/strong>. BIS’s current compulsory-certification listing identifies IS 2835:1987 under the Flat Transparent Sheet Glass (Quality Control) Order, 2021<\/strong>.<\/p>\n
The standard specifies requirements and test methods for flat transparent sheet glass used for applications such as photographic plates, projection slides, silvered glass mirrors, toughened or laminated safety glass and glazing\/framing purposes.<\/p>\n
Manufacturers supplying covered flat transparent sheet glass in India need to ensure conformity with the applicable standard and obtain the required BIS licence before using the BIS Standard Mark.<\/p>\n
\n
About the Product<\/h1>\n
Flat Transparent Sheet Glass<\/strong> is a flat, transparent glass product manufactured with controlled dimensions, thickness and surface quality.<\/p>\n
According to BIS’s product information, the glass is intended for applications where transparency, smoothness and dimensional uniformity are important. The standard addresses requirements related to dimensions, thickness and permissible surface defects.<\/p>\n
Typical applications include:<\/p>\n
\n
Glazing<\/li>\n
Framing<\/li>\n
Manufacture of photographic plates<\/li>\n
Projection slides<\/li>\n
Silvered glass mirrors<\/li>\n
Toughened glass<\/li>\n
Laminated safety glass<\/li>\n
Other applicable glass products<\/li>\n<\/ul>\n
\n
What is BIS Certification?<\/h1>\n
BIS Certification<\/strong> is a conformity assessment system operated by the Bureau of Indian Standards<\/strong>.<\/p>\n
For products covered under compulsory certification, manufacturers must demonstrate conformity with the applicable Indian Standard and satisfy the applicable BIS certification requirements.<\/p>\n
For Flat Transparent Sheet Glass, the product is covered under Scheme-I \/ ISI Mark certification<\/strong>. BIS’s current listing associates IS 2835:1987 with the applicable QCO framework.<\/p>\n
\n
What is IS 2835:1987?<\/h1>\n
IS 2835:1987<\/strong> is titled:<\/p>\n
\u201cSpecification for Flat Transparent Sheet Glass.\u201d<\/strong><\/p>\n
The BIS Product Manual identifies it as the relevant standard and states that the manual is intended to provide guidance for certification under Scheme-I.<\/p>\n
The BIS Building Materials publication also identifies IS 2835:1987 as Specification for Flat Transparent Sheet Glass (Third Revision)<\/strong>.<\/p>\n
\n
Scope of IS 2835:1987<\/h1>\n
IS 2835:1987 specifies requirements and test methods for flat transparent sheet glass.<\/p>\n
The standard addresses characteristics including:<\/p>\n
\n
Material<\/li>\n
Thickness<\/li>\n
Length<\/li>\n
Width<\/li>\n
Gaseous inclusions<\/li>\n
Opaque gaseous inclusions<\/li>\n
Knots, dirt and stones<\/li>\n
Scratches<\/li>\n
Rubs<\/li>\n
Crush<\/li>\n
Bow<\/li>\n
Reams<\/li>\n
Light strings<\/li>\n
Lines<\/li>\n
Waviness<\/li>\n
Sulphur stains<\/li>\n
Corner breakage<\/li>\n
Chips<\/li>\n
Allowable clusters of defects<\/li>\n<\/ul>\n
These parameters are reflected in the current BIS laboratory testing scope for IS 2835.<\/p>\n
\n
Products \/ Applications Covered<\/h1>\n
Flat Transparent Sheet Glass under the applicable standard may be used for:<\/p>\n
\n
Photographic plates<\/li>\n
Projection slides<\/li>\n
Silvered glass mirrors<\/li>\n
Toughened safety glass manufacturing<\/li>\n
Laminated safety glass manufacturing<\/li>\n
Glazing purposes<\/li>\n
Framing purposes<\/li>\n
Other applicable uses covered by the standard<\/li>\n<\/ul>\n
BIS’s product information specifically identifies these applications.<\/p>\n
\n
Mandatory BIS Certification<\/h1>\n
Yes, BIS certification is mandatory for covered Flat Transparent Sheet Glass.<\/strong><\/p>\n
BIS’s current compulsory certification page lists:<\/p>\n
IS 2835:1987 \u2013 Flat Transparent Sheet Glass<\/strong><\/p>\n
and identifies the applicable Flat Transparent Sheet Glass (Quality Control) Order, 2021<\/strong>. The current listing also records that the earlier 2020 QCO was superseded by the 2021 Order.<\/p>\n
\n
Applicable QCO Details<\/h1>\n
Flat Transparent Sheet Glass (Quality Control) Order, 2021<\/h2>\n
The 2021 QCO specifies:<\/p>\n
Product:<\/strong> Flat Transparent Sheet Glass<\/p>\n
Indian Standard:<\/strong> IS 2835:1987<\/p>\n
Title:<\/strong> Flat Transparent Sheet Glass \u2013 Specification<\/p>\n
The order states that the latest version of the Indian Standard, including amendments as notified by BIS, is applicable from the date notified by BIS.<\/p>\n
Important Regulatory History<\/h3>\n
The original Flat Transparent Sheet Glass (Quality Control) Order, 2020<\/strong> was issued on 14 February 2020<\/strong> and came into force from 17 August 2020<\/strong>. It was subsequently superseded by the 2021 QCO<\/strong>.<\/p>\n
\n
Who Needs BIS Certification?<\/h1>\n
BIS certification may be applicable to manufacturers producing covered Flat Transparent Sheet Glass, including:<\/p>\n
\n
Flat glass manufacturers<\/li>\n
Sheet glass manufacturers<\/li>\n
Transparent glass manufacturers<\/li>\n
Glass processing\/manufacturing units<\/li>\n
OEM manufacturers<\/li>\n
Eligible foreign manufacturers<\/li>\n
Manufacturers supplying regulated glass products in India<\/li>\n<\/ul>\n
The exact applicability should always be checked against the latest QCO and BIS requirements.<\/p>\n
\n
Eligibility Criteria<\/h1>\n
A manufacturer should generally have:<\/p>\n
\n
Suitable manufacturing facilities<\/li>\n
Required production machinery<\/li>\n
Quality-control system<\/li>\n
Raw-material control<\/li>\n
Testing facilities or appropriate testing arrangements<\/li>\n
Calibrated measuring equipment<\/li>\n
Trained technical personnel<\/li>\n
Production records<\/li>\n
Inspection records<\/li>\n
Finished-product inspection system<\/li>\n
Storage facilities<\/li>\n
Product traceability system<\/li>\n<\/ul>\n
The factory should be capable of consistently producing glass conforming to IS 2835:1987.<\/p>\n
\n
Complete BIS Certification Process<\/h1>\n
Step 1 \u2013 Product Identification<\/h2>\n
Identify the exact Flat Transparent Sheet Glass manufactured by the factory.<\/p>\n
Step 2 \u2013 Standard Applicability<\/h2>\n
Confirm that the product falls under:<\/p>\n
IS 2835:1987<\/strong><\/p>\n
Step 3 \u2013 Product Specification Assessment<\/h2>\n
Review:<\/p>\n
\n
Thickness<\/li>\n
Length<\/li>\n
Width<\/li>\n
Quality classification<\/li>\n
Surface condition<\/li>\n
Defect limits<\/li>\n<\/ul>\n
Step 4 \u2013 Factory Assessment<\/h2>\n
Review manufacturing facilities, machinery, testing arrangements and quality-control systems.<\/p>\n
Step 5 \u2013 Documentation<\/h2>\n
Prepare the required BIS technical and legal documents.<\/p>\n
Step 6 \u2013 Sample Preparation<\/h2>\n
Prepare representative product samples according to BIS requirements.<\/p>\n
Step 7 \u2013 Laboratory Testing<\/h2>\n
Test samples for applicable IS 2835 requirements.<\/p>\n
Step 8 \u2013 BIS Application<\/h2>\n
Submit the BIS application with the required supporting documents.<\/p>\n
Step 9 \u2013 Application Scrutiny<\/h2>\n
BIS reviews the submitted application and technical information.<\/p>\n
Step 10 \u2013 Factory Inspection<\/h2>\n
BIS may conduct an assessment of the manufacturing premises.<\/p>\n
Step 11 \u2013 Testing \/ Verification<\/h2>\n
Required samples and testing results are reviewed according to the certification procedure.<\/p>\n
Step 12 \u2013 Observation Closure<\/h2>\n
Resolve any observations raised by BIS.<\/p>\n
Step 13 \u2013 Licence Grant<\/h2>\n
After successful completion of requirements, BIS may grant the licence.<\/p>\n
Step 14 \u2013 ISI Mark<\/h2>\n
The manufacturer can use the BIS Standard Mark according to the licence conditions.<\/p>\n
Step 15 \u2013 Ongoing Compliance<\/h2>\n
Continue production, inspection and testing according to applicable BIS requirements.<\/p>\n
\n
Required Documents<\/h1>\n
Common documents may include:<\/p>\n
\n
Company registration certificate<\/li>\n
Factory registration<\/li>\n
Factory address proof<\/li>\n
Factory layout<\/li>\n
Manufacturing process flow chart<\/li>\n
Machinery list<\/li>\n
Product specifications<\/li>\n
Product drawings, where applicable<\/li>\n
Raw-material details<\/li>\n
Quality-control plan<\/li>\n
Testing equipment list<\/li>\n
Calibration certificates<\/li>\n
Internal test reports<\/li>\n
Product photographs<\/li>\n
Packaging details<\/li>\n
Product marking details<\/li>\n
Trademark documents<\/li>\n
Authorized signatory documents<\/li>\n
BIS application documents<\/li>\n
Declarations and undertakings<\/li>\n<\/ul>\n
The final document list can vary according to the manufacturer and certification scope.<\/p>\n
\n
Testing Requirements<\/h1>\n
Testing is one of the most important parts of IS 2835 certification.<\/p>\n
Current BIS LIMS information lists testing facilities for IS 2835:1987<\/strong> and provides individual testing parameters and charges.<\/p>\n
Testing parameters include:<\/p>\n
1. Material<\/h3>\n
The material is evaluated against the applicable requirements.<\/p>\n
2. Thickness<\/h3>\n
The thickness of the glass is checked against the specified requirements.<\/p>\n
3. Length<\/h3>\n
The length is measured according to the standard.<\/p>\n
4. Width<\/h3>\n
The width is evaluated against the applicable dimensional requirements.<\/p>\n
5. Gaseous Inclusions<\/h3>\n
The glass is examined for specified gaseous inclusions.<\/p>\n
6. Opaque Gaseous Inclusions<\/h3>\n
Opaque gaseous inclusions are checked against the permissible limits.<\/p>\n
7. Knots, Dirt and Stones<\/h3>\n
The glass surface is inspected for these defects.<\/p>\n
8. Scratches, Rubs and Crush<\/h3>\n
Surface defects such as scratches, rubs and crush are evaluated.<\/p>\n
9. Bow<\/h3>\n
The glass is assessed for bow\/curvature.<\/p>\n
10. Reams, Light Strings and Lines<\/h3>\n
These surface\/optical defects are evaluated according to the standard.<\/p>\n
11. Waviness<\/h3>\n
The product is assessed for permissible waviness.<\/p>\n
12. Sulphur Stains<\/h3>\n
The applicable requirement for sulphur stains is checked.<\/p>\n
13. Corner Breakage and Chips<\/h3>\n
The glass is examined for corner breakage and chips.<\/p>\n
14. Allowable Clusters of Defects<\/h3>\n
BIS LIMS also identifies testing for allowable clusters of defects for applicable quality categories.<\/p>\n
\n
BIS Testing Laboratory<\/h1>\n
BIS LIMS currently lists IS 2835:1987<\/strong> in its laboratory scope.<\/p>\n
For example, BIS Central Laboratory is listed for the standard, and BIS LIMS also lists other laboratories with IS 2835 testing scope.<\/p>\n
Testing charges can vary depending upon:<\/p>\n
\n
Laboratory<\/li>\n
Test parameters<\/li>\n
Product scope<\/li>\n
Testing package<\/li>\n
Number of samples<\/li>\n
Additional requirements<\/li>\n<\/ul>\n
Therefore, current BIS LIMS charges should be checked before budgeting for certification.<\/p>\n
\n
BIS Testing Cost<\/h1>\n
Current BIS LIMS entries show different testing charges depending on the laboratory and scope.<\/p>\n
One BIS LIMS listing for IS 2835 shows an overall testing charge of \u20b925,000 excluding taxes<\/strong>, while another listing provides parameter-wise charges.<\/p>\n
Therefore, manufacturers should not assume that \u20b925,000 is the complete BIS certification cost.<\/p>\n
The overall project cost may include:<\/p>\n
\n
Application fees<\/li>\n
Testing charges<\/li>\n
Inspection expenses<\/li>\n
Licence-related charges<\/li>\n
Retesting, if required<\/li>\n
Documentation<\/li>\n
Consultancy fees<\/li>\n<\/ul>\n
\n
Factory Inspection Process<\/h1>\n
During factory inspection, important areas may include:<\/p>\n
Manufacturing Facility<\/h3>\n
BIS may assess whether the factory has suitable manufacturing infrastructure.<\/p>\n
Raw Material Control<\/h3>\n
Raw materials and their quality-control procedures may be reviewed.<\/p>\n
Manufacturing Process<\/h3>\n
The manufacturing process should be documented and controlled.<\/p>\n
Product Inspection<\/h3>\n
Finished glass should be inspected for dimensions and surface defects.<\/p>\n
Testing Facilities<\/h3>\n
Required testing arrangements should be available.<\/p>\n
Calibration<\/h3>\n
Measuring instruments should have valid calibration records.<\/p>\n
Quality Records<\/h3>\n
Production and inspection records should be properly maintained.<\/p>\n
Product Marking<\/h3>\n
BIS-related marking requirements should be followed after licence grant.<\/p>\n
\n
Common Reasons for Application Rejection or Delay<\/h1>\n
\n
Wrong Indian Standard selected<\/li>\n
Incorrect product classification<\/li>\n
Incomplete documentation<\/li>\n
Inadequate manufacturing facilities<\/li>\n
Product failing laboratory testing<\/li>\n
Dimensional non-conformity<\/li>\n
Excessive surface defects<\/li>\n
Inadequate testing arrangements<\/li>\n
Expired calibration certificates<\/li>\n
Missing quality-control records<\/li>\n
Incorrect product marking<\/li>\n
Incomplete application<\/li>\n
Failure to close BIS observations<\/li>\n
Factory not ready for inspection<\/li>\n<\/ul>\n
\n
Cost Factors<\/h1>\n
The total BIS certification cost depends on:<\/p>\n
\n
Product scope<\/li>\n
Number of product variants<\/li>\n
Testing requirements<\/li>\n
Laboratory charges<\/li>\n
Application charges<\/li>\n
Factory inspection expenses<\/li>\n
Retesting<\/li>\n
Documentation requirements<\/li>\n
Consultancy support<\/li>\n<\/ul>\n
Important:<\/strong> BIS certification cost should be quoted after assessing the actual product and manufacturing scope.<\/p>\n
\n
Timeline<\/h1>\n
The BIS certification timeline is not identical for every manufacturer.<\/p>\n
It can depend on:<\/p>\n
\n
Document readiness<\/li>\n
Factory readiness<\/li>\n
Sample availability<\/li>\n
Laboratory availability<\/li>\n
Testing results<\/li>\n
BIS application scrutiny<\/li>\n
Inspection scheduling<\/li>\n
Observation closure<\/li>\n<\/ul>\n
A realistic timeline should therefore be provided after reviewing the manufacturer’s actual situation.<\/p>\n
\n
Benefits of BIS Certification<\/h1>\n
Regulatory Compliance<\/h3>\n
Helps manufacturers comply with the applicable QCO requirements.<\/p>\n
Product Quality<\/h3>\n
Ensures conformity with specified quality requirements.<\/p>\n
Customer Confidence<\/h3>\n
Improves confidence among buyers and industrial customers.<\/p>\n
Market Acceptance<\/h3>\n
Supports compliant sale and supply of regulated products.<\/p>\n
Brand Credibility<\/h3>\n
BIS certification adds credibility to the manufacturer.<\/p>\n
Quality Control<\/h3>\n
Encourages systematic production and testing controls.<\/p>\n
\n
Why Choose Qualitance India?<\/h1>\n
Qualitance India<\/strong> provides professional BIS Certification Consultancy for Flat Transparent Sheet Glass and other regulated products.<\/p>\n
Our Services Include:<\/h3>\n
\u2713 BIS Applicability Assessment
\u2713 IS 2835 Scope Assessment
\u2713 Documentation Support
\u2713 Testing Coordination
\u2713 Sample Preparation Guidance
\u2713 BIS Application Assistance
\u2713 Factory Inspection Preparation
\u2713 Quality-Control Documentation
\u2713 Technical Observation Support
\u2713 Product Marking Guidance
\u2713 End-to-End BIS Certification Support<\/p>\n
Contact<\/h3>\n
Phone:<\/strong> +91-9310-615-170
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> qualitanceindia.com<\/p>\n
QUALITANCE INDIA \u2013 IMPROVING QUALITY AND COMPETENCE<\/strong><\/p>\n
\n
Step-by-Step Flow Chart<\/h1>\n
Product Identification<\/strong>
\u2193
IS 2835 Applicability Assessment<\/strong>
\u2193
Product Specification Assessment<\/strong>
\u2193
Factory Readiness Assessment<\/strong>
\u2193
Documentation Preparation<\/strong>
\u2193
Sample Preparation<\/strong>
\u2193
Laboratory Testing<\/strong>
\u2193
BIS Application Submission<\/strong>
\u2193
Application Scrutiny<\/strong>
\u2193
Factory Inspection<\/strong>
\u2193
Observation Closure<\/strong>
\u2193
BIS Licence Grant<\/strong>
\u2193
ISI Mark Compliance<\/strong>
\u2193
Ongoing Compliance<\/strong><\/p>\n
\n
25 SEO FAQs<\/h1>\n
1. What is BIS Certification for Flat Transparent Sheet Glass?<\/h3>\n
It is the BIS conformity-assessment certification required for covered Flat Transparent Sheet Glass products under the applicable QCO.<\/p>\n
2. What is IS 2835:1987?<\/h3>\n
IS 2835:1987 is the Indian Standard titled Specification for Flat Transparent Sheet Glass<\/strong>.<\/p>\n
3. Is BIS Certification mandatory for Flat Transparent Sheet Glass?<\/h3>\n
Yes. IS 2835:1987 is included in BIS’s compulsory certification framework under the applicable Flat Transparent Sheet Glass QCO.<\/p>\n
4. What is the applicable QCO?<\/h3>\n
The current BIS listing identifies the Flat Transparent Sheet Glass (Quality Control) Order, 2021<\/strong>.<\/p>\n
5. What products are covered under IS 2835?<\/h3>\n
The standard covers Flat Transparent Sheet Glass for applications including glazing, framing, photographic plates, projection slides, mirrors and manufacture of certain safety-glass products.<\/p>\n
6. What tests are required under IS 2835?<\/h3>\n
Tests can cover material, thickness, dimensions, gaseous inclusions, surface defects, bow, waviness, sulphur stains, corner breakage, chips and allowable defect clusters.<\/p>\n
7. Is glass thickness tested?<\/h3>\n
Yes. Thickness is one of the testing parameters identified by BIS LIMS.<\/p>\n
8. Is glass width tested?<\/h3>\n
Yes. Width is included in the BIS testing scope for IS 2835.<\/p>\n
9. Is glass length tested?<\/h3>\n
Yes. Length is also included in the testing scope.<\/p>\n
10. Are scratches tested under IS 2835?<\/h3>\n
Yes. Scratches, rubs and crush are among the surface-defect parameters identified in the BIS laboratory scope.<\/p>\n
11. Is waviness tested?<\/h3>\n
Yes. Waviness is one of the applicable quality parameters.<\/p>\n
12. Is bow tested?<\/h3>\n
Yes. Bow is included among the applicable test parameters.<\/p>\n
13. Are chips and corner breakage tested?<\/h3>\n
Yes. BIS LIMS identifies corner breakage and chips as testing parameters.<\/p>\n
14. What documents are required for BIS Certification?<\/h3>\n
Documents generally include factory details, manufacturing process, machinery, product specifications, testing facilities, calibration records and quality-control documents.<\/p>\n
15. Is factory inspection required?<\/h3>\n
Factory assessment forms part of the applicable BIS certification process.<\/p>\n
16. How much does BIS Certification cost?<\/h3>\n
The cost depends on testing, application, inspection, product scope and other certification-related expenses.<\/p>\n
17. What is the testing cost for IS 2835?<\/h3>\n
BIS LIMS currently shows different charges depending on laboratory and testing scope; one listing shows \u20b925,000 excluding taxes for IS 2835.<\/p>\n
18. Can a glass manufacturer apply for BIS Certification?<\/h3>\n
Yes, eligible manufacturers producing products covered by the applicable QCO can apply.<\/p>\n
19. Can foreign manufacturers obtain BIS Certification?<\/h3>\n
Eligible foreign manufacturers can apply under the applicable BIS foreign-manufacturer certification framework.<\/p>\n
20. What is the BIS Standard Mark?<\/h3>\n
It is the BIS conformity mark that licensed manufacturers may use according to applicable licence conditions.<\/p>\n
21. What is the difference between sheet glass and safety glass?<\/h3>\n
Sheet glass under IS 2835 is a specific flat transparent glass product, whereas safety glass is covered by separate standards such as IS 2553, depending on the product and application.<\/p>\n
22. Is IS 2835 still listed by BIS?<\/h3>\n
Yes. BIS’s current compulsory-certification listing continues to list IS 2835:1987.<\/p>\n
23. What is the BIS certification process for sheet glass?<\/h3>\n
It generally involves product assessment, documentation, sample testing, application, factory assessment, observation closure and licence grant.<\/p>\n
24. How long does BIS Certification take?<\/h3>\n
The timeline depends on testing, documentation, factory readiness, BIS scrutiny and inspection scheduling.<\/p>\n
25. Can Qualitance India help with IS 2835 BIS Certification?<\/h3>\n
Yes. Qualitance India can assist with documentation, testing coordination, BIS application and factory inspection preparation.<\/p>\n
\n
FAQ Schema Content<\/h1>\n
Use these questions in your visible FAQ section:<\/p>\n
\n
What is BIS Certification for Flat Transparent Sheet Glass?<\/li>\n
What is IS 2835:1987?<\/li>\n
Is BIS Certification mandatory for Flat Transparent Sheet Glass?<\/li>\n
What is the applicable QCO?<\/li>\n
What products are covered under IS 2835?<\/li>\n
What tests are required under IS 2835?<\/li>\n
What documents are required?<\/li>\n
Is factory inspection required?<\/li>\n
What is the BIS certification cost?<\/li>\n
How long does BIS Certification take?<\/li>\n
Can foreign manufacturers obtain BIS Certification?<\/li>\n
What is the BIS Standard Mark?<\/li>\n<\/ul>\n
\n
Service Schema Suggestion<\/h1>\n
Service Name:<\/strong> BIS Certification Consultancy for Flat Transparent Sheet Glass<\/p>\n
Service Type:<\/strong> BIS Certification Consultancy<\/p>\n
Applicable Standard:<\/strong> IS 2835:1987<\/p>\n
Product:<\/strong> Flat Transparent Sheet Glass<\/p>\n
Provider:<\/strong> Qualitance India<\/p>\n
Area Served:<\/strong> India<\/p>\n
Description:<\/strong> End-to-end BIS Certification Consultancy for Flat Transparent Sheet Glass under IS 2835:1987, including documentation, testing coordination, BIS application and factory inspection support.<\/p>\n
\n
Organization Schema Suggestion<\/h1>\n
Organization Name:<\/strong> Qualitance India<\/p>\n
Tagline:<\/strong> Improving Quality and Competence<\/p>\n
Phone:<\/strong> +91-9310-615-170<\/p>\n
Email:<\/strong> info@qualitanceindia.com<\/a><\/p>\n
Website:<\/strong> qualitanceindia.com<\/p>\n
\n
Breadcrumb Schema Suggestion<\/h1>\n
Home \u2192 BIS Certification \u2192 Glass Products \u2192 Flat Transparent Sheet Glass \u2192 IS 2835:1987<\/strong><\/p>\n
\n
Article Schema Suggestion<\/h1>\n
Article Type:<\/strong> Article \/ BlogPosting<\/p>\n
Headline:<\/strong> BIS Certification for Flat Transparent Sheet Glass \u2013 IS 2835:1987<\/p>\n
Author:<\/strong> Qualitance India<\/p>\n
Publisher:<\/strong> Qualitance India<\/p>\n
Article Section:<\/strong> BIS Certification<\/p>\n
Keywords:<\/strong> BIS Certification for Flat Transparent Sheet Glass, IS 2835, Sheet Glass BIS Licence, Flat Glass Certification<\/p>\n
\n
BIS Certification for Flat Transparent Sheet Glass<\/li>\n
IS 2835:1987 BIS Certification<\/li>\n
Flat Transparent Sheet Glass BIS Licence<\/li>\n
Flat Transparent Glass ISI Mark<\/li>\n
IS 2835 Testing<\/li>\n
BIS Certification for Glass Manufacturer<\/li>\n
Flat Glass BIS Certification<\/li>\n
Transparent Sheet Glass Testing<\/li>\n
BIS Testing for Flat Transparent Sheet Glass<\/li>\n
IS 2835 BIS Licence Process<\/li>\n
Flat Transparent Sheet Glass QCO<\/li>\n
BIS Factory Inspection for Glass<\/li>\n
Sheet Glass Quality Testing<\/li>\n
Flat Transparent Glass Manufacturer BIS Certification<\/li>\n
Qualitance India BIS Certification Consultancy<\/li>\n<\/ol>\n
\n
Internal Linking Strategy<\/h1>\n
Is blog ko website ke in related pages se link karein:<\/p>\n
\n
BIS Certification Consultancy<\/li>\n
BIS Certification Process<\/li>\n
BIS Certification Cost<\/li>\n
BIS Certification Documents<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection<\/li>\n
ISI Mark Certification<\/li>\n
Glass Products BIS Certification<\/li>\n
Building Material BIS Certification<\/li>\n
QCO Compliance Consultancy<\/li>\n
Foreign Manufacturer BIS Certification<\/li>\n<\/ul>\n
Recommended Anchor Text<\/h3>\n
\n
BIS Certification Process<\/li>\n
BIS Certification Cost<\/li>\n
BIS Testing Services<\/li>\n
BIS Factory Inspection<\/li>\n
ISI Mark Certification<\/li>\n
QCO Compliance<\/li>\n
BIS Certification for Glass Products<\/li>\n
Building Material BIS Certification<\/li>\n<\/ul>\n
\n
External Authority References<\/h1>\n
Website par authoritative references ke liye official BIS sources use karein:<\/p>\n
\n
BIS Scheme-I Compulsory Certification:<\/strong> IS 2835:1987 and applicable QCO listing.<\/li>\n
BIS Product Manual:<\/strong> IS 2835:1987.<\/li>\n
Flat Transparent Sheet Glass QCO 2021:<\/strong> Official Government\/BIS notification.<\/li>\n
BIS LIMS:<\/strong> Current IS 2835 laboratory\/testing information.<\/li>\n<\/ul>\n
\n
Related BIS Services<\/h1>\n
\n
BIS Certification for Flat Transparent Sheet Glass<\/li>\n
BIS Certification for Safety Glass<\/li>\n
BIS Certification for Transparent Float Glass<\/li>\n
BIS Certification for Glass Products<\/li>\n
BIS Certification for Building Materials<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection Assistance<\/li>\n
BIS Documentation Support<\/li>\n
ISI Mark Certification<\/li>\n
QCO Compliance Consultancy<\/li>\n
Foreign Manufacturer BIS Certification<\/li>\n
Glass Product Testing<\/li>\n
BIS Application Assistance<\/li>\n<\/ol>\n
\n
Suggestions<\/h1>\n
\n
BIS Certification for Flat Transparent Sheet Glass \u2013 Complete Guide<\/strong><\/li>\n
IS 2835:1987 \u2013 Complete BIS Certification Process<\/strong><\/li>\n
Flat Transparent Sheet Glass QCO 2021 \u2013 Complete Guide<\/strong><\/li>\n
Documents Required for IS 2835 BIS Certification<\/strong><\/li>\n
BIS Testing Requirements for Flat Transparent Sheet Glass<\/strong><\/li>\n
BIS Certification Cost for Flat Transparent Sheet Glass<\/strong><\/li>\n
BIS Certification Process for Glass Manufacturers<\/strong><\/li>\n
BIS Factory Inspection for Glass Manufacturers<\/strong><\/li>\n
IS 2835 Testing Laboratory in India<\/strong><\/li>\n
ISI Mark Certification for Flat Glass<\/strong><\/li>\n
BIS Certification for Safety Glass \u2013 IS 2553<\/strong><\/li>\n
BIS Certification for Transparent Float Glass \u2013 IS 14900<\/strong><\/li>\n
Difference Between Sheet Glass and Float Glass<\/strong><\/li>\n
Glass Products Covered Under BIS Certification<\/strong><\/li>\n
How to Get BIS Licence for Glass Products<\/strong><\/li>\n<\/ol>\n
Need BIS Certification for Flat Transparent Sheet Glass?<\/h2>\n
Are you a Glass Manufacturer, Sheet Glass Manufacturer, Glass Processing Unit or Supplier<\/strong> looking for BIS Certification under IS 2835:1987<\/strong>?<\/p>\n
Qualitance India Can Help With:<\/h3>\n
\u2713 IS 2835 Applicability Assessment
\u2713 Product Scope Assessment
\u2713 Documentation Support
\u2713 Testing Laboratory Coordination
\u2713 Sample Preparation Guidance
\u2713 BIS Application Assistance
\u2713 Factory Inspection Preparation
\u2713 Quality-Control Documentation
\u2713 Technical Observation Support
\u2713 ISI Mark Guidance
\u2713 End-to-End BIS Certification Consultancy<\/p>\n
Contact Qualitance India<\/h3>\n
\ud83d\udcde +91-9310-615-170<\/strong>
\ud83d\udce7 info@qualitanceindia.com<\/a><\/strong>
\ud83c\udf10 qualitanceindia.com<\/strong><\/p>\n
QUALITANCE INDIA \u2013 IMPROVING QUALITY AND COMPETENCE<\/strong><\/p>\n
\n
SEO-Optimized Conclusion<\/h1>\n
BIS Certification for Flat Transparent Sheet Glass as per IS 2835:1987<\/strong> is an important mandatory compliance requirement for manufacturers covered under the applicable Flat Transparent Sheet Glass (Quality Control) Order, 2021<\/strong>. BIS’s current compulsory-certification listing confirms IS 2835:1987 within the compulsory certification framework.<\/p>\n
IS 2835 specifies requirements relating to the quality, dimensions, thickness and permissible defects of Flat Transparent Sheet Glass. Testing can include material, dimensions, gaseous inclusions, scratches, rubs, crush, bow, waviness, stains, chips and other specified characteristics.<\/p>\n
For manufacturers, successful BIS certification requires proper product assessment, documentation, testing, factory preparedness, BIS application and ongoing quality control<\/strong>.<\/p>\n
If you are looking for IS 2835 BIS Certification, testing coordination, documentation support or factory inspection assistance<\/strong>, Qualitance India can provide end-to-end consultancy support.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n","protected":false},"excerpt":{"rendered":"
Introduction BIS Certification for Flat Transparent Sheet Glass is a mandatory compliance requirement for covered products in India. The applicable Indian Standard is IS 2835:1987 \u2013 Specification for Flat Transparent Sheet Glass. BIS’s current compulsory-certification listing identifies IS 2835:1987 under the Flat Transparent Sheet Glass (Quality Control) Order, 2021. The standard specifies requirements and test […]<\/p>\n","protected":false},"author":1,"featured_media":3416,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification for Flat Transparent Sheet Glass \u2013 IS 2835:1987 - Qualitance India","description":"Introduction BIS Certification for Flat Transparent Sheet Glass is a mandatory compliance requirement for covered products in India. The applicable Indian Stand"},"_slim_seo_primary_term_category":0,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3415","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3415","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=3415"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3415\/revisions"}],"predecessor-version":[{"id":3417,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3415\/revisions\/3417"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/3416"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=3415"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=3415"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=3415"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}