DC or AC supplied electronic controlgear is an important component used with LED modules to control and regulate electrical power supplied to LED lighting systems. These products may include LED drivers and other electronic controlgear designed to operate with LED modules.<\/p>\n
For manufacturers and importers dealing with such products in India, compliance with the applicable Indian Standard is an important part of product safety and regulatory requirements.<\/p>\n
IS 15885 (Part 2\/Sec 13):2012<\/strong> is titled \u201cSafety of Lamp Controlgear \u2013 Part 2: Particular Requirements \u2013 Section 13: d.c. or a.c. Supplied Electronic Controlgear for LED Modules.\u201d<\/strong> The standard specifies particular safety requirements for electronic controlgear intended for DC supplies up to and including 1,000 V and AC supplies up to and including 1,000 V at 50 Hz, including associated LED-module controlgear.<\/p>\n Qualitance India provides professional BIS certification consultancy support for manufacturers and businesses seeking assistance with documentation, product testing, application procedures and BIS compliance.<\/p>\n The BIS Compulsory Registration Scheme (CRS)<\/strong> is a conformity assessment framework under which specified electronic and electrical products are required to comply with applicable Indian Standards before being manufactured, imported, stored for sale, sold or distributed in India, wherever the product is covered by the applicable regulatory order.<\/p>\n For DC or AC supplied electronic controlgear for LED modules, IS 15885 (Part 2\/Sec 13):2012<\/strong> specifies particular safety requirements.<\/p>\n The BIS standard covers safety aspects of electronic controlgear associated with LED modules. The standard also works together with the applicable general requirements for lamp controlgear.<\/p>\n The applicable standard is:<\/p>\n IS 15885 (Part 2\/Sec 13):2012<\/strong><\/p>\n Title:<\/strong> Safety of Lamp Controlgear \u2013 Part 2: Particular Requirements \u2013 Section 13: d.c. or a.c. Supplied Electronic Controlgear for LED Modules.<\/p>\n The BIS standard specifies requirements for electronic controlgear operating on DC supplies up to and including 1,000 V and AC supplies up to and including 1,000 V at 50 Hz. It also addresses controlgear associated with LED modules.<\/p>\n BIS’s published LED standards information also specifically lists IS 15885 (Part 2\/Sec 13):2012 among the Indian Standards for LED and LED-based products.<\/p>\n Depending on the product construction and application, this standard may be relevant to electronic controlgear used with LED modules, including products such as:<\/p>\n The exact applicability of the standard should be determined from the product’s design, electrical ratings, intended application and applicable BIS requirements.<\/p>\n A BIS test report template issued by BIS identifies an example test item as an \u201cLED Driver (AC supplied Electronic Control gear for LED module)\u201d<\/strong>.<\/p>\n The standard establishes particular safety requirements for electronic controlgear used with LED modules.<\/p>\n It covers controlgear for DC supplies up to and including 1,000 V and AC supplies up to and including 1,000 V at 50 Hz. Controlgear may provide constant voltage or current at SELV or higher voltages, subject to the requirements of the standard.<\/p>\n Performance requirements are addressed separately through the relevant performance standard, IS 16104:2012 \u2013 d.c. or a.c. Supplied Electronic Control Gear for LED Modules \u2013 Performance Requirements<\/strong>.<\/p>\n The standard addresses a range of safety-related characteristics of electronic controlgear.<\/p>\n Testing and evaluation can include areas such as:<\/p>\n BIS laboratory records currently list testing under IS 15885 (Part 2\/Sec 13):2012 and show testing charges varying between laboratories and product\/test scope. Therefore, there is no single universal testing fee for every product.<\/p>\n The certification and registration process generally involves the following stages:<\/p>\n The first step is to identify the exact product, model, electrical ratings, construction and applicable Indian Standard.<\/p>\n For LED electronic controlgear, the applicability of IS 15885 (Part 2\/Sec 13):2012<\/strong> should be confirmed based on the product specifications.<\/p>\n The manufacturer needs to prepare the required technical and business documents for the BIS application and testing process.<\/p>\n Typical documentation may include:<\/p>\n The exact document requirement can vary according to the application and product.<\/p>\n The product is submitted for testing at an applicable BIS-recognized laboratory.<\/p>\n The laboratory evaluates the product against the relevant requirements of the applicable Indian Standard.<\/p>\n BIS LIMS currently lists multiple laboratories providing testing facilities for IS 15885 (Part 2\/Sec 13):2012<\/strong>, with testing charges differing by laboratory.<\/p>\n After completion of testing, the laboratory prepares the applicable test report.<\/p>\n The BIS UTRF for this product category references IS 15885 (Part 2\/Sec 13):2012+A1:2015<\/strong> in conjunction with IS 15885 (Part 1):2011+A1:2015<\/strong>.<\/p>\n The relevant application and supporting documents are submitted through the applicable BIS process.<\/p>\n BIS reviews the submitted information and supporting technical documentation.<\/p>\n After successful completion of the applicable compliance and registration requirements, BIS registration can be granted subject to the applicable scheme and regulatory requirements.<\/p>\n Manufacturers should generally keep the following information ready:<\/p>\n The exact documentation depends on the product configuration and applicant structure.<\/p>\n Testing is a major part of BIS product compliance.<\/p>\n For electronic controlgear, laboratories may evaluate electrical, insulation, mechanical, thermal and construction-related safety requirements.<\/p>\n BIS LIMS records currently show laboratories offering testing for IS 15885 (Part 2\/Sec 13):2012, including laboratories in Delhi\/NCR, Gujarat, Hyderabad, Pune and other locations. The listed charges differ significantly between laboratories and therefore should be confirmed for the specific product before testing.<\/p>\n The testing cost is not fixed across all laboratories.<\/p>\n Current BIS LIMS records show examples ranging from approximately \u20b930,000 to \u20b91,85,000 excluding taxes<\/strong>, depending on the laboratory and scope of testing. These figures are laboratory-specific and can change over time.<\/p>\n Therefore, manufacturers should obtain a current quotation based on:<\/p>\n Certification fees and other applicable expenses are separate from laboratory testing charges.<\/p>\n Electronic controlgear directly interacts with the electrical supply and LED module. Proper safety evaluation helps address electrical, thermal, insulation and construction-related risks.<\/p>\n Compliance with the applicable Indian Standard can help manufacturers demonstrate that their products have been evaluated against specified safety requirements.<\/p>\n For businesses supplying LED lighting products in India, proper regulatory assessment should be completed before commercial supply where BIS requirements apply.<\/p>\n Manufacturers may face difficulties because of:<\/p>\n Professional BIS consultancy can help reduce documentation errors and coordinate the certification workflow.<\/p>\n Qualitance India<\/strong> provides end-to-end BIS certification consultancy support for manufacturers and businesses.<\/p>\n Our support can include:<\/p>\n Our objective is to make the certification process more structured and easier for manufacturers dealing with Indian regulatory requirements.<\/p>\n IS 15885 (Part 2\/Sec 13):2012 is an Indian Standard specifying particular safety requirements for DC or AC supplied electronic controlgear for LED modules.<\/p>\n The standard applies to applicable electronic controlgear associated with LED modules, including relevant AC or DC supplied controlgear and LED drivers.<\/p>\n Applicable LED drivers\/electronic controlgear can fall under this standard depending on their construction, ratings and intended use. BIS’s test report format specifically includes an example of an AC supplied LED driver.<\/p>\n The standard specifies requirements for DC supplies up to and including 1,000 V and AC supplies up to and including 1,000 V at 50 Hz.<\/p>\n Where BIS certification\/registration requirements apply, product testing against the applicable standard is an important part of the conformity process.<\/p>\n Testing should be carried out through an applicable BIS-recognized laboratory. BIS LIMS currently lists laboratories with scope for IS 15885 (Part 2\/Sec 13):2012.<\/p>\n Testing charges depend on the laboratory and product\/test scope. Current BIS LIMS records show different charges for this standard, so manufacturers should confirm the latest quotation before testing.<\/p>\n Yes. It is specifically a safety standard for particular requirements relating to electronic controlgear for LED modules.<\/p>\n The BIS standard indicates that performance requirements are covered separately under IS 16104:2012<\/strong>.<\/p>\n Model coverage depends on the applicable BIS requirements, product construction, testing and grouping considerations. A model-by-model assessment should be performed before filing.<\/p>\n Documents can include manufacturer details, technical specifications, circuit diagrams, component information, product labels, manuals, photographs, test reports and other application documents.<\/p>\n The eligibility and application structure depend on the applicable BIS scheme and regulatory requirements. The applicant’s role, manufacturer location and product category should be assessed before application.<\/p>\n If a product does not meet the applicable requirements, corrective action may be required before successful completion of the certification process.<\/p>\n The requirement for factory inspection depends on the applicable BIS conformity assessment scheme and product category. It should not be assumed to be mandatory for every CRS product.<\/p>\n Safety requirements address risks such as electrical shock, insulation, heating, fire and construction. Performance requirements address functional\/performance characteristics and are covered by the relevant performance standard.<\/p>\n BIS compliance for DC or AC Supplied Electronic Controlgear for LED Modules<\/strong> is an important consideration for manufacturers and businesses supplying applicable LED controlgear in India.<\/p>\n IS 15885 (Part 2\/Sec 13):2012<\/strong> provides particular safety requirements for electronic controlgear associated with LED modules and covers important areas including electrical safety, insulation, fault conditions, thermal behaviour, construction, creepage and clearance, resistance to heat\/fire\/tracking and corrosion.<\/p>\n With the right product assessment, documentation, laboratory testing and application support, manufacturers can make the BIS certification process more organized and efficient.<\/p>\nWhat Is BIS CRS Certification for LED Electronic Controlgear?<\/h2>\n
Applicable Indian Standard<\/h2>\n
Products Covered<\/h2>\n
\n
Scope of IS 15885 (Part 2\/Sec 13):2012<\/h2>\n
Important Safety Requirements<\/h2>\n
\n
BIS CRS Certification Process for LED Controlgear<\/h2>\n
1. Product and Standard Identification<\/h3>\n
2. Documentation Preparation<\/h3>\n
\n
3. Product Testing<\/h3>\n
4. Test Report<\/h3>\n
5. BIS Application and Review<\/h3>\n
6. Grant of Registration<\/h3>\n
Documents Required for BIS CRS Certification<\/h2>\n
\n
Product Testing Requirements<\/h2>\n
BIS Testing Cost for Electronic Controlgear<\/h2>\n
\n
Why Compliance Is Important for LED Controlgear<\/h2>\n
Common Challenges in BIS CRS Certification<\/h2>\n
\n
BIS CRS Certification Consultancy by Qualitance India<\/h2>\n
\n
Frequently Asked Questions<\/h2>\n
1. What is IS 15885 (Part 2\/Sec 13):2012?<\/h3>\n
2. What products are associated with this standard?<\/h3>\n
3. Does the standard cover LED drivers?<\/h3>\n
4. What voltage range is covered?<\/h3>\n
5. Is testing required?<\/h3>\n
6. Where can the product be tested?<\/h3>\n
7. How much does BIS testing cost?<\/h3>\n
8. Is IS 15885 (Part 2\/Sec 13) a safety standard?<\/h3>\n
9. Does this standard cover performance requirements?<\/h3>\n
10. Can one BIS registration cover multiple models?<\/h3>\n
11. What documents are required?<\/h3>\n
12. Can an importer apply for BIS certification?<\/h3>\n
13. What happens if the product fails testing?<\/h3>\n
14. Is factory inspection always required?<\/h3>\n
15. What is the difference between safety and performance requirements?<\/h3>\n
Conclusion<\/h2>\n
Need BIS CRS Certification Consultancy?<\/h3>\n