{"id":3468,"date":"2026-08-19T12:01:24","date_gmt":"2026-08-19T12:01:24","guid":{"rendered":"https:\/\/qualitanceindia.com\/?p=3468"},"modified":"2026-08-19T12:01:24","modified_gmt":"2026-08-19T12:01:24","slug":"bis-certification-for-poly-aluminium-chloride-is-155732018","status":"publish","type":"post","link":"https:\/\/qualitanceindia.com\/bis-certification-for-poly-aluminium-chloride-is-155732018\/","title":{"rendered":"BIS Certification for Poly Aluminium Chloride | IS 15573:2018"},"content":{"rendered":"

\n

\n

\n

\n

Introduction<\/h1>\n
Poly Aluminium Chloride, commonly known as PAC<\/strong>, is an important water-treatment chemical used for coagulation and removal of suspended and colloidal impurities from water. It is widely used in drinking-water treatment, industrial water treatment, sewage treatment and other water purification applications.<\/p>\n
In India, Poly Aluminium Chloride is covered under IS 15573:2018 \u2013 Polyaluminium Chloride<\/strong>. BIS has issued a Product Manual for this standard under Scheme-I of the BIS Conformity Assessment Regulations, 2018<\/strong>.<\/p>\n
The Poly Aluminium Chloride (Quality Control) Order, 2019<\/strong> requires the specified product to conform to IS 15573:2018 and bear the Standard Mark under a BIS licence, subject to the provisions and exemptions of the Order.<\/p>\n
This makes BIS certification an important requirement for manufacturers supplying Poly Aluminium Chloride in the Indian market.<\/p>\n
\n
About Poly Aluminium Chloride<\/h1>\n
Poly Aluminium Chloride is an inorganic polymeric coagulant used primarily in water and wastewater treatment.<\/p>\n
It helps destabilize suspended particles and facilitates their aggregation into larger particles, which can then be separated from water through processes such as sedimentation and filtration.<\/p>\n
PAC is available in different forms and grades.<\/p>\n
The BIS Product Manual specifically identifies:<\/p>\n
\n
Liquid PAC<\/li>\n
Powder PAC<\/li>\n
Medium Basicity PAC<\/li>\n
High Basicity PAC<\/li>\n<\/ul>\n
The applicable form and grade must be included within the BIS licence scope.<\/p>\n
\n
What is IS 15573:2018?<\/h1>\n
IS 15573:2018<\/strong> is the Indian Standard titled:<\/p>\n
Polyaluminium Chloride<\/strong><\/p>\n
The standard specifies requirements and testing methods for Poly Aluminium Chloride.<\/p>\n
BIS’s current product manual identifies IS 15573:2018<\/strong> as the applicable standard and notes amendments to the standard.<\/p>\n
The standard covers important characteristics such as:<\/p>\n
\n
Aluminium content<\/li>\n
Basicity<\/li>\n
Chloride<\/li>\n
Sulphates<\/li>\n
Specific gravity<\/li>\n
Viscosity<\/li>\n
Bulk density<\/li>\n
Toxic substances<\/li>\n
Insoluble matter<\/li>\n
pH<\/li>\n<\/ul>\n
The exact requirement depends on whether the PAC is supplied in liquid or powder form and whether it is medium or high basicity.<\/p>\n
\n
Scope of IS 15573:2018<\/h1>\n
IS 15573:2018 applies to Poly Aluminium Chloride<\/strong> manufactured for its specified applications.<\/p>\n
The BIS certification scope distinguishes between:<\/p>\n
Liquid PAC<\/h3>\n
Liquid Poly Aluminium Chloride supplied as the applicable grade.<\/p>\n
Powder PAC<\/h3>\n
Powder-form Poly Aluminium Chloride supplied as the applicable grade.<\/p>\n
Medium Basicity PAC<\/h3>\n
PAC conforming to the medium-basicity requirements of the standard.<\/p>\n
High Basicity PAC<\/h3>\n
PAC conforming to the high-basicity requirements of the standard.<\/p>\n
BIS’s Product Manual requires a sample of each form and each grade to be tested for including that respective form and grade in the licence scope.<\/p>\n
\n
Applications of Poly Aluminium Chloride<\/h1>\n
Poly Aluminium Chloride can be used in:<\/p>\n
\n
Drinking water treatment<\/li>\n
Municipal water treatment<\/li>\n
Industrial wastewater treatment<\/li>\n
Sewage treatment<\/li>\n
Effluent treatment<\/li>\n
Water purification plants<\/li>\n
Paper and pulp industries<\/li>\n
Textile wastewater treatment<\/li>\n
Chemical industries<\/li>\n
Process-water treatment<\/li>\n
Industrial effluent clarification<\/li>\n<\/ul>\n
The suitability of a particular PAC grade depends on the intended application and the requirements of the user.<\/p>\n
\n
BIS Certification for Poly Aluminium Chloride<\/h1>\n
BIS certification provides a mechanism for demonstrating conformity of Poly Aluminium Chloride with IS 15573:2018<\/strong>.<\/p>\n
BIS lists IS 15573 under its products covered by Scheme-I \/ ISI Mark Scheme<\/strong>, and the applicable Quality Control Order requires the Standard Mark under a BIS licence.<\/p>\n
A manufacturer seeking certification needs to establish that:<\/p>\n
\n
The manufacturing process is controlled<\/li>\n
Appropriate raw materials are used<\/li>\n
The product meets the standard’s requirements<\/li>\n
Required testing facilities are available<\/li>\n
Quality-control records are maintained<\/li>\n
The applicable product scope can be consistently manufactured<\/li>\n<\/ul>\n
\n
Quality Control Order for Poly Aluminium Chloride<\/h1>\n
The Poly Aluminium Chloride (Quality Control) Order, 2019<\/strong> was issued by the Ministry of Chemicals and Fertilizers, Department of Chemicals and Petrochemicals.<\/p>\n
The Order specifies:<\/p>\n
Product:<\/strong> Poly Aluminium Chloride
Indian Standard:<\/strong> IS 15573:2018
Title:<\/strong> Specification for Poly Aluminium Chloride<\/p>\n
The Order requires the specified goods to conform to the Indian Standard and bear the Standard Mark under a BIS licence in accordance with Scheme-I, subject to the Order’s provisions.<\/p>\n
The Order also provides an exemption for goods meant for export where they conform to the specifications required by the foreign buyer.<\/p>\n
\n
Raw Material Requirements<\/h1>\n
Raw-material quality is particularly important for PAC because the finished product is intended for water-treatment applications.<\/p>\n
The BIS Product Manual specifies requirements regarding raw materials.<\/p>\n
For PAC manufactured from virgin raw materials, the materials should not be by-products of another industry and should be suitable for producing PAC that is safe for drinking-water applications. Conformity can be established through a supplier’s certificate or manufacturer’s declaration, as applicable.<\/p>\n
For certain manufacturing routes involving PAC concentrate with high alumina content, such as PAC-18, the updated Product Manual contains additional requirements concerning in-house production, storage and declarations.<\/p>\n
Manufacturers should therefore maintain proper:<\/p>\n
\n
Raw-material specifications<\/li>\n
Supplier certificates<\/li>\n
Purchase records<\/li>\n
Material identification<\/li>\n
Storage records<\/li>\n
Batch traceability<\/li>\n<\/ul>\n
\n
Important Requirements of IS 15573:2018<\/h1>\n
Aluminium as Al\u2082O\u2083<\/h2>\n
The aluminium content expressed as Al\u2082O\u2083<\/strong> is an important characteristic of PAC.<\/p>\n
The required minimum depends on the form and grade of the product.<\/p>\n
Basicity<\/h2>\n
Basicity is one of the key characteristics used to classify PAC.<\/p>\n
The standard specifies minimum basicity requirements according to the applicable grade.<\/p>\n
Chloride<\/h2>\n
Chloride content is controlled within the limits specified for the applicable PAC type.<\/p>\n
Sulphates<\/h2>\n
Sulphate content is also subject to specified maximum limits.<\/p>\n
Specific Gravity<\/h2>\n
Specific gravity is applicable to liquid PAC and must meet the relevant requirement.<\/p>\n
Viscosity<\/h2>\n
Viscosity is an important characteristic for liquid PAC.<\/p>\n
Bulk Density<\/h2>\n
Bulk density is applicable to powder PAC.<\/p>\n
Toxic Substances<\/h2>\n
The standard specifies limits for relevant toxic substances.<\/p>\n
These can include:<\/p>\n
\n
Mercury<\/li>\n
Arsenic<\/li>\n
Cadmium<\/li>\n
Lead<\/li>\n
Iron<\/li>\n
Manganese<\/li>\n
Chromium<\/li>\n
Selenium, where applicable<\/li>\n<\/ul>\n
The applicable Product Manual and current standard should be followed for the complete requirements and test frequencies.<\/p>\n
Insoluble Matter<\/h2>\n
The product must comply with the specified limit for insoluble matter.<\/p>\n
pH<\/h2>\n
The pH of a 5 percent solution is another important requirement specified under the standard.<\/p>\n
\n
Testing Requirements<\/h1>\n
Testing for Poly Aluminium Chloride under IS 15573:2018 can include:<\/p>\n
\n
Description<\/li>\n
Aluminium as Al\u2082O\u2083<\/li>\n
Basicity<\/li>\n
Chloride as Cl<\/li>\n
Sulphates as SO\u2084<\/li>\n
Specific gravity<\/li>\n
Viscosity<\/li>\n
Bulk density<\/li>\n
Toxic substances<\/li>\n
Insoluble matter<\/li>\n
pH of 5 percent solution<\/li>\n<\/ul>\n
The applicable tests depend on the PAC form and grade.<\/p>\n
BIS LIMS currently lists laboratories for IS 15573:2018 covering liquid and powder PAC in medium and high basicity grades<\/strong>.<\/p>\n
\n
Sample Requirements<\/h1>\n
The current BIS Product Manual specifies:<\/p>\n
Powder PAC:<\/strong> 750 grams
Liquid PAC:<\/strong> 750 ml<\/p>\n
The sample requirement should be followed when preparing samples for BIS testing.<\/p>\n
For licence scope, the Product Manual states that a sample from each form and each grade<\/strong> is required to cover that respective form and grade in the licence scope.<\/p>\n
\n
Product Grouping<\/h1>\n
Unlike some standards where one sample can cover a broad group of products, the BIS Product Manual for IS 15573:2018 specifies that:<\/p>\n
\n
Liquid form requires testing for liquid scope<\/li>\n
Powder form requires testing for powder scope<\/li>\n
Medium basicity requires applicable testing<\/li>\n
High basicity requires applicable testing<\/li>\n<\/ul>\n
Therefore, manufacturers producing multiple forms and grades should plan their certification scope carefully.<\/p>\n
\n
Manufacturing Process<\/h1>\n
A typical PAC manufacturing process may involve:<\/p>\n
Raw Material Selection<\/h3>\n
Suitable virgin raw materials are selected according to the required manufacturing route.<\/p>\n
Reaction<\/h3>\n
The raw materials undergo controlled chemical reactions.<\/p>\n
Concentration<\/h3>\n
The PAC solution is concentrated to achieve the required product characteristics.<\/p>\n
Adjustment<\/h3>\n
Parameters such as basicity and aluminium content are controlled according to the required grade.<\/p>\n
Liquid PAC Production<\/h3>\n
The finished material may be filtered and stored as liquid PAC.<\/p>\n
Powder PAC Production<\/h3>\n
For powder PAC, additional drying and powder-processing operations may be used.<\/p>\n
Quality Testing<\/h3>\n
The finished product is tested against the applicable requirements of IS 15573:2018.<\/p>\n
Packing<\/h3>\n
The final product is packed in suitable containers or packaging according to the product form.<\/p>\n
Storage<\/h3>\n
PAC should be stored under appropriate conditions to prevent contamination and deterioration.<\/p>\n
\n
Factory Requirements<\/h1>\n
A manufacturer should maintain suitable infrastructure for:<\/p>\n
\n
Raw-material storage<\/li>\n
Chemical processing<\/li>\n
Reaction<\/li>\n
Filtration<\/li>\n
Concentration<\/li>\n
Powder processing, where applicable<\/li>\n
Liquid storage<\/li>\n
Finished-product storage<\/li>\n
Packaging<\/li>\n
Quality control<\/li>\n
Sample preparation<\/li>\n
Testing<\/li>\n<\/ul>\n
The exact facilities depend on whether the manufacturer produces liquid PAC, powder PAC, or both.<\/p>\n
\n
Documents Required<\/h1>\n
Common documents required for BIS certification can include:<\/p>\n
\n
Company registration documents<\/li>\n
Factory address proof<\/li>\n
Factory layout<\/li>\n
Manufacturing process flow<\/li>\n
Machinery details<\/li>\n
Raw-material specifications<\/li>\n
Supplier certificates<\/li>\n
Raw-material purchase records<\/li>\n
Product specifications<\/li>\n
Product formulation\/process details<\/li>\n
Quality-control plan<\/li>\n
Internal test reports<\/li>\n
Laboratory test reports<\/li>\n
Testing equipment list<\/li>\n
Calibration certificates<\/li>\n
Product packing details<\/li>\n
Product labels<\/li>\n
Marking details<\/li>\n
Authorized signatory documents<\/li>\n
Trademark documents, where applicable<\/li>\n<\/ul>\n
Additional documents may be required depending on the manufacturing process and product scope.<\/p>\n
\n
Testing Facilities<\/h1>\n
The manufacturer should have access to suitable testing facilities required for the applicable product scope.<\/p>\n
Important testing arrangements can include facilities for:<\/p>\n
\n
Aluminium analysis<\/li>\n
Basicity<\/li>\n
Chloride<\/li>\n
Sulphates<\/li>\n
Specific gravity<\/li>\n
Viscosity<\/li>\n
Bulk density<\/li>\n
Toxic substances<\/li>\n
Insoluble matter<\/li>\n
pH<\/li>\n<\/ul>\n
The exact equipment and testing arrangements should be checked against the latest BIS Product Manual.<\/p>\n
\n
Factory Inspection<\/h1>\n
During the BIS factory assessment, the following areas may be reviewed:<\/p>\n
Raw Materials<\/h3>\n
Verification of raw-material specifications and records.<\/p>\n
Manufacturing Process<\/h3>\n
Review of the production process and process controls.<\/p>\n
Storage<\/h3>\n
Inspection of raw-material and finished-product storage conditions.<\/p>\n
Testing Facilities<\/h3>\n
Verification of required testing equipment and procedures.<\/p>\n
Calibration<\/h3>\n
Checking calibration records for measuring and testing equipment.<\/p>\n
Quality Control<\/h3>\n
Review of batch-wise testing and inspection records.<\/p>\n
Traceability<\/h3>\n
Verification of batch identification and production records.<\/p>\n
Product Marking<\/h3>\n
Verification of product labels and applicable BIS marking arrangements.<\/p>\n
\n
Quality Control During Production<\/h1>\n
Manufacturers should maintain suitable controls for:<\/p>\n
\n
Raw-material inspection<\/li>\n
Batch identification<\/li>\n
Process parameters<\/li>\n
Aluminium content<\/li>\n
Basicity<\/li>\n
Product form<\/li>\n
Toxic-substance limits<\/li>\n
pH<\/li>\n
Insoluble matter<\/li>\n
Final product testing<\/li>\n<\/ul>\n
Regular testing helps ensure that the product remains within the required limits.<\/p>\n
\n
BIS Marking<\/h1>\n
Once the BIS licence is granted, the certified product can be marked with the applicable BIS Standard Mark and licence number (CM\/L)<\/strong> according to BIS requirements.<\/p>\n
The Standard Mark should only be used within the approved licence scope and according to the applicable marking conditions.<\/p>\n
The Poly Aluminium Chloride QCO specifically requires the Standard Mark under a BIS licence for the covered product.<\/p>\n
\n
BIS Testing Cost<\/h1>\n
Current BIS LIMS listings show testing facilities for IS 15573:2018.<\/p>\n
For example, one current listing shows \u20b915,000 excluding taxes<\/strong> for liquid and powder PAC covering medium and high basicity, while another laboratory listing shows \u20b912,500 excluding taxes<\/strong> for its listed scope.<\/p>\n
The actual testing cost can vary according to:<\/p>\n
\n
Laboratory<\/li>\n
Product form<\/li>\n
Grade<\/li>\n
Testing scope<\/li>\n
Additional parameters<\/li>\n
Sample requirements<\/li>\n<\/ul>\n
Therefore, the current laboratory quotation should be confirmed before sample submission.<\/p>\n
\n
Cost of BIS Certification<\/h1>\n
The overall certification cost may include:<\/p>\n
\n
BIS application charges<\/li>\n
Laboratory testing<\/li>\n
Sample preparation<\/li>\n
Factory inspection<\/li>\n
Testing equipment<\/li>\n
Calibration<\/li>\n
Documentation<\/li>\n
Retesting, if required<\/li>\n
Consultancy charges<\/li>\n<\/ul>\n
The final cost depends on the manufacturer’s product scope and existing testing infrastructure.<\/p>\n
\n
Certification Timeline<\/h1>\n
The time required for BIS certification depends on:<\/p>\n
\n
Documentation readiness<\/li>\n
Factory readiness<\/li>\n
Testing laboratory availability<\/li>\n
Sample preparation<\/li>\n
Product scope<\/li>\n
BIS application processing<\/li>\n
Factory inspection<\/li>\n
Test-report evaluation<\/li>\n
Closure of observations<\/li>\n<\/ul>\n
Manufacturers producing both liquid and powder PAC or multiple grades should plan the testing and documentation requirements before applying.<\/p>\n
\n
Common Reasons for Certification Delays<\/h1>\n
Some common issues include:<\/p>\n
\n
Incorrect product classification<\/li>\n
Incorrect grade selection<\/li>\n
Incomplete raw-material records<\/li>\n
Non-compliant chemical composition<\/li>\n
Basicity outside the specified limit<\/li>\n
Excessive toxic substances<\/li>\n
Incorrect pH<\/li>\n
High insoluble matter<\/li>\n
Inadequate testing facilities<\/li>\n
Missing calibration records<\/li>\n
Incomplete batch records<\/li>\n
Poor traceability<\/li>\n
Improper sample preparation<\/li>\n
Factory not ready for assessment<\/li>\n
Incorrect product marking<\/li>\n
Incomplete documentation<\/li>\n<\/ul>\n
\n
Who Needs BIS Certification?<\/h1>\n
BIS certification requirements can apply to manufacturers of Poly Aluminium Chloride covered by IS 15573:2018 and the applicable Quality Control Order.<\/p>\n
This may include:<\/p>\n
\n
Poly Aluminium Chloride manufacturers<\/li>\n
PAC chemical manufacturers<\/li>\n
Water-treatment chemical manufacturers<\/li>\n
Chemical processing companies<\/li>\n
Industrial water-treatment suppliers<\/li>\n
Wastewater-treatment chemical manufacturers<\/li>\n
Municipal water-treatment chemical suppliers<\/li>\n
Companies manufacturing liquid PAC<\/li>\n
Companies manufacturing powder PAC<\/li>\n<\/ul>\n
Importers should separately verify the current BIS and QCO requirements applicable to imported PAC.<\/p>\n
\n
Benefits of BIS Certification<\/h1>\n
Regulatory Compliance<\/h3>\n
Helps manufacturers comply with applicable mandatory requirements.<\/p>\n
Product Quality<\/h3>\n
Testing verifies important chemical and physical characteristics.<\/p>\n
Customer Confidence<\/h3>\n
BIS certification provides confidence that the product conforms to the applicable Indian Standard.<\/p>\n
Market Acceptance<\/h3>\n
BIS certification is important where the QCO applies.<\/p>\n
Better Quality Control<\/h3>\n
Regular production testing helps maintain consistency.<\/p>\n
Traceability<\/h3>\n
Batch records and testing documentation improve product traceability.<\/p>\n
Business Credibility<\/h3>\n
BIS certification can improve acceptance among industrial and institutional customers.<\/p>\n
\n
Why Choose Qualitance India?<\/h1>\n
Qualitance India<\/strong> provides BIS certification consultancy for manufacturers and businesses dealing with products covered under Indian Standards.<\/p>\n
For Poly Aluminium Chloride as per IS 15573:2018<\/strong>, assistance can include:<\/p>\n
\n
Product applicability assessment<\/li>\n
Form and grade identification<\/li>\n
BIS requirement review<\/li>\n
Product scope planning<\/li>\n
Documentation support<\/li>\n
Testing requirement assessment<\/li>\n
Laboratory coordination<\/li>\n
Sample preparation guidance<\/li>\n
BIS application assistance<\/li>\n
Factory inspection preparation<\/li>\n
Quality-control documentation<\/li>\n
Test report coordination<\/li>\n
Observation closure assistance<\/li>\n
BIS licence support<\/li>\n<\/ul>\n
Qualitance India<\/strong><\/p>\n
Phone:<\/strong> +91-9310-615-170
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
\n
BIS Certification Process<\/h1>\n
Product Identification<\/strong>
\u2193
IS 15573:2018 Requirement Review<\/strong>
\u2193
Liquid\/Powder Identification<\/strong>
\u2193
Medium\/High Basicity Identification<\/strong>
\u2193
Factory & Testing Facility Review<\/strong>
\u2193
Documentation Preparation<\/strong>
\u2193
Sample Preparation<\/strong>
\u2193
Laboratory Testing<\/strong>
\u2193
BIS Application<\/strong>
\u2193
BIS Scrutiny<\/strong>
\u2193
Factory Assessment<\/strong>
\u2193
Test Report Evaluation<\/strong>
\u2193
Observation Closure<\/strong>
\u2193
BIS Licence Grant<\/strong>
\u2193
Standard Mark Compliance<\/strong><\/p>\n
\n
Frequently Asked Questions<\/h1>\n
1. What is Poly Aluminium Chloride?<\/h3>\n
Poly Aluminium Chloride, or PAC, is an inorganic polymeric coagulant widely used for water and wastewater treatment.<\/p>\n
2. What is IS 15573:2018?<\/h3>\n
IS 15573:2018 is the Indian Standard for Polyaluminium Chloride<\/strong>.<\/p>\n
3. Is BIS certification mandatory for Poly Aluminium Chloride?<\/h3>\n
Poly Aluminium Chloride is covered by the Poly Aluminium Chloride (Quality Control) Order, 2019<\/strong>, which requires conformity to IS 15573:2018 and the Standard Mark under a BIS licence, subject to the Order’s provisions.<\/p>\n
4. What forms of PAC are covered?<\/h3>\n
The BIS Product Manual identifies liquid and powder forms.<\/p>\n
5. What grades are covered?<\/h3>\n
The Product Manual identifies medium basicity and high basicity grades.<\/p>\n
6. Is separate testing required for liquid and powder PAC?<\/h3>\n
The Product Manual states that a sample of PAC in each form and each grade needs to be tested for covering the respective form and grade in the licence scope.<\/p>\n
7. What is the sample quantity?<\/h3>\n
The Product Manual specifies 750 grams for powder PAC and 750 ml for liquid PAC<\/strong>.<\/p>\n
8. What tests are performed on PAC?<\/h3>\n
Testing can include aluminium content, basicity, chloride, sulphates, specific gravity, viscosity, bulk density, toxic substances, insoluble matter and pH.<\/p>\n
9. Is toxic-substance testing required?<\/h3>\n
Yes. The standard specifies limits for relevant toxic substances.<\/p>\n
10. Is pH testing required?<\/h3>\n
Yes. The pH of a 5 percent solution is an applicable characteristic under the standard.<\/p>\n
11. Is basicity important for PAC?<\/h3>\n
Yes. Basicity is a major characteristic used to distinguish PAC grades under the standard.<\/p>\n
12. What raw materials are required?<\/h3>\n
The BIS Product Manual contains requirements regarding virgin raw materials and specific requirements for certain manufacturing routes.<\/p>\n
13. Is factory inspection required?<\/h3>\n
Factory assessment forms part of the applicable BIS certification process.<\/p>\n
14. Is testing equipment required at the factory?<\/h3>\n
The manufacturer needs suitable testing arrangements according to the applicable certification requirements and product scope.<\/p>\n
15. Can a manufacturer get one licence for liquid and powder PAC?<\/h3>\n
The licence scope can include both where the manufacturer meets the applicable requirements and submits the required samples and test evidence for each form.<\/p>\n
16. What is the current PAC testing cost?<\/h3>\n
Current BIS LIMS listings show different charges depending on the laboratory and scope, including listings of \u20b912,500 and \u20b915,000 excluding taxes.<\/p>\n
17. Can exported PAC be exempt from the QCO?<\/h3>\n
The 2019 QCO provides an exemption for goods meant for export that conform to specifications required by the foreign buyer.<\/p>\n
18. Can Qualitance India help with PAC certification?<\/h3>\n
Yes. Qualitance India can assist with product assessment, documentation, testing coordination, BIS application and factory inspection preparation.<\/p>\n
19. How long does BIS certification take?<\/h3>\n
The timeline depends on product scope, testing, factory readiness, documentation and BIS processing.<\/p>\n
20. How can I start BIS certification for Poly Aluminium Chloride?<\/h3>\n
You can begin by sharing your PAC form, grade, manufacturing process, factory details and existing testing facilities for an applicability and requirement assessment.<\/p>\n
\n
People Also Ask<\/h1>\n
What is BIS certification for Poly Aluminium Chloride?<\/h3>\n
It is the BIS conformity certification process for PAC manufactured according to IS 15573:2018.<\/p>\n
Is IS 15573 mandatory for PAC manufacturers?<\/h3>\n
Poly Aluminium Chloride is covered under the Poly Aluminium Chloride Quality Control Order, 2019.<\/p>\n
What is PAC used for?<\/h3>\n
PAC is primarily used as a coagulant in water and wastewater treatment.<\/p>\n
What is the difference between liquid and powder PAC?<\/h3>\n
Liquid PAC is supplied as a solution, while powder PAC is supplied in dry form. The applicable requirements and testing characteristics differ according to the standard.<\/p>\n
What is PAC basicity?<\/h3>\n
Basicity is an important chemical characteristic of Poly Aluminium Chloride and is used to classify PAC grades under IS 15573.<\/p>\n
What tests are required for Poly Aluminium Chloride?<\/h3>\n
Tests include chemical and physical characteristics such as aluminium content, basicity, chloride, sulphates, specific gravity, viscosity, toxic substances, insoluble matter and pH.<\/p>\n
How do I get a BIS licence for PAC?<\/h3>\n
The process involves product assessment, documentation, testing, BIS application, factory assessment, evaluation and licence grant.<\/p>\n
\n
Website Image Text<\/h1>\n
POLY ALUMINIUM CHLORIDE<\/strong><\/p>\n
IS 15573:2018<\/strong><\/p>\n
BIS CERTIFICATION CONSULTANCY<\/strong><\/p>\n
Qualitance India<\/strong><\/p>\n
+91-9310-615-170<\/strong>
info@qualitanceindia.com<\/a><\/strong>
qualitanceindia.com<\/strong><\/p>\n
\n
Image Text Suggestions<\/h1>\n
\n
BIS Certification for Poly Aluminium Chloride<\/li>\n
Poly Aluminium Chloride IS 15573:2018<\/li>\n
BIS Licence for PAC<\/li>\n
PAC BIS Certification<\/li>\n
Poly Aluminium Chloride Testing<\/li>\n
Liquid PAC BIS Certification<\/li>\n
Powder PAC BIS Certification<\/li>\n
Medium Basicity PAC Certification<\/li>\n
High Basicity PAC Certification<\/li>\n
IS 15573 Testing<\/li>\n
PAC Quality Testing<\/li>\n
BIS Certification for Water Treatment Chemicals<\/li>\n
Poly Aluminium Chloride Manufacturer<\/li>\n
BIS Factory Inspection for PAC<\/li>\n
Qualitance India BIS Certification Consultancy<\/li>\n<\/ol>\n
\n
Related Services<\/h1>\n
\n
BIS Certification Consultancy<\/li>\n
BIS Certification for Water Treatment Chemicals<\/li>\n
BIS Certification for Chemical Products<\/li>\n
BIS Product Testing<\/li>\n
BIS Factory Inspection<\/li>\n
ISI Mark Certification<\/li>\n
BIS Certification under Quality Control Orders<\/li>\n
Chemical Testing<\/li>\n
Water Treatment Chemical Certification<\/li>\n
PAC Testing<\/li>\n
Chemical Product Certification<\/li>\n<\/ul>\n
\n
Related Topics for Your Website<\/h1>\n
\n
BIS Certification for Water Treatment Chemicals<\/li>\n
BIS Certification for Industrial Chemicals<\/li>\n
BIS Certification for Chemical Products<\/li>\n
BIS Certification for PAC Manufacturers<\/li>\n
Poly Aluminium Chloride Testing Requirements<\/li>\n
Liquid PAC BIS Certification<\/li>\n
Powder PAC BIS Certification<\/li>\n
Medium Basicity PAC vs High Basicity PAC<\/li>\n
BIS Certification Process for Chemical Manufacturers<\/li>\n
Quality Control Orders for Chemical Products<\/li>\n<\/ol>\n
\n
Need BIS Certification for Poly Aluminium Chloride?<\/h1>\n
If you manufacture Poly Aluminium Chloride<\/strong> and need BIS certification as per IS 15573:2018<\/strong>, proper preparation of your product scope, raw materials, manufacturing process, testing facilities and quality-control documentation is important.<\/p>\n
Qualitance India<\/strong> can assist with product assessment, documentation, laboratory coordination, BIS application and factory inspection preparation.<\/p>\n
Qualitance India<\/strong>
Phone:<\/strong> +91-9310-615-170
Email:<\/strong> info@qualitanceindia.com<\/a>
Website:<\/strong> https:\/\/qualitanceindia.com\/<\/a><\/p>\n
Contact Qualitance India for assistance with BIS Certification for Poly Aluminium Chloride as per IS 15573:2018.<\/strong><\/p>\n
\n
Conclusion<\/h1>\n
Poly Aluminium Chloride is an important water-treatment chemical used across drinking-water, wastewater and industrial water-treatment applications. IS 15573:2018<\/strong> establishes requirements for PAC, including important characteristics such as aluminium content, basicity, chloride, sulphates, specific gravity, viscosity, toxic substances, insoluble matter and pH.<\/p>\n
The Poly Aluminium Chloride (Quality Control) Order, 2019<\/strong> makes conformity with the applicable Indian Standard and use of the Standard Mark under a BIS licence an important regulatory requirement for covered products.<\/p>\n
Manufacturers should carefully determine their product form, grade, raw-material source, manufacturing process, testing arrangements and licence scope<\/strong> before starting the certification process.<\/p>\n
For manufacturers requiring assistance, Qualitance India<\/strong> can support the BIS certification process for Poly Aluminium Chloride as per IS 15573:2018<\/strong>, from initial product assessment through testing, application and factory inspection preparation.<\/p>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n
<\/div>\n
\n
\n
<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
Introduction Poly Aluminium Chloride, commonly known as PAC, is an important water-treatment chemical used for coagulation and removal of suspended and colloidal impurities from water. It is widely used in drinking-water treatment, industrial water treatment, sewage treatment and other water purification applications. In India, Poly Aluminium Chloride is covered under IS 15573:2018 \u2013 Polyaluminium Chloride. […]<\/p>\n","protected":false},"author":1,"featured_media":3469,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification for Poly Aluminium Chloride | IS 15573:2018 - Qualitance India","description":"Introduction Poly Aluminium Chloride, commonly known as PAC , is an important water-treatment chemical used for coagulation and removal of suspended and colloid"},"_slim_seo_primary_term_category":0,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-3468","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3468","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=3468"}],"version-history":[{"count":1,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3468\/revisions"}],"predecessor-version":[{"id":3470,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/3468\/revisions\/3470"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/3469"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=3468"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=3468"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=3468"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}