{"id":4142,"date":"2026-10-15T11:09:13","date_gmt":"2026-10-15T11:09:13","guid":{"rendered":"https:\/\/qualitanceindia.com\/?p=4142"},"modified":"2026-10-15T11:12:44","modified_gmt":"2026-10-15T11:12:44","slug":"bis-certification-consultant-for-hdpe-pp-woven-fertilizer-bags-is-97552021-qualitance-india","status":"publish","type":"post","link":"https:\/\/qualitanceindia.com\/bis-certification-consultant-for-hdpe-pp-woven-fertilizer-bags-is-97552021-qualitance-india\/","title":{"rendered":"BIS Certification Consultant for HDPE\/PP Woven Fertilizer Bags | IS 9755:2021 | Qualitance India"},"content":{"rendered":"<h1>INTRODUCTION<\/h1>\n<div>Manufacturers of fertilizer packaging bags must ensure that their products meet the applicable requirements for strength, dimensions, material quality, stitching, drop resistance and other specified performance characteristics. These requirements are important for protecting fertilizers during storage, handling and transportation.<\/div>\n<p>In India, <strong>HDPE and PP woven sacks used for packaging fertilizers are covered by IS 9755:2021 \u2014 Textiles: High Density Polyethylene (HDPE)\/Polypropylene (PP) Woven Sacks for Packaging Fertilizers \u2014 Specification<\/strong>.<\/p>\n<p>The applicable Quality Control Order requires covered fertilizer packaging sacks to conform to the specified Indian Standard and bear the BIS Standard Mark under a valid licence. Manufacturers, importers, exporters and suppliers should therefore assess the applicable certification requirements before supplying these bags to the Indian market.<\/p>\n<p><strong>Qualitance India<\/strong> provides BIS certification consultancy, application documentation support, product testing coordination, product grouping guidance and manufacturing quality-control support for HDPE\/PP woven fertilizer bags.<\/p>\n<h2>1. What Is IS 9755:2021 for HDPE\/PP Woven Fertilizer Bags?<\/h2>\n<p>IS 9755:2021 specifies requirements for woven sacks manufactured from high-density polyethylene (HDPE) or polypropylene (PP) for packaging fertilizers.<\/p>\n<p>These bags are used for packaging and transporting fertilizer products and must meet the applicable construction, material and performance requirements of the standard.<\/p>\n<p>The BIS Product Manual for IS 9755:2021 provides guidance on product grouping, raw materials, sample requirements, testing equipment, factory quality control and the scope of the BIS licence.<\/p>\n<p>Important areas covered by the standard include:<\/p>\n<ul>\n<li>HDPE or PP raw materials.<\/li>\n<li>Woven fabric construction.<\/li>\n<li>Sack dimensions and tolerances.<\/li>\n<li>Fabric mass and sack mass.<\/li>\n<li>Fabric breaking strength and elongation.<\/li>\n<li>Liner requirements, where applicable.<\/li>\n<li>Lamination requirements, where applicable.<\/li>\n<li>Bottom seam and stitching.<\/li>\n<li>Capacity requirements.<\/li>\n<li>Drop impact strength.<\/li>\n<li>UV resistance for applicable products.<\/li>\n<li>Printing, marking, packaging and storage.<\/li>\n<\/ul>\n<p>Manufacturers should refer to the complete standard and the latest applicable BIS Product Manual to confirm the requirements for their product configuration.<\/p>\n<h2>2. Is BIS Certification Mandatory for Fertilizer Bags in India?<\/h2>\n<p><strong>Yes. BIS certification is mandatory for HDPE\/PP woven sacks covered by the Textiles\u2014HDPE\/PP Woven Sacks for Packaging Fertilizers (Quality Control) Order, 2023, subject to the applicable provisions and exemptions.<\/strong><\/p>\n<p>The order identifies IS 9755:2021 as the applicable Indian Standard and requires covered products to conform to the standard and bear the BIS Standard Mark under a licence issued according to Scheme-I of the BIS Conformity Assessment Regulations, 2018.<\/p>\n<p>The original QCO was published in December 2023 and was subsequently amended in June 2024. The applicable implementation dates and any later amendments should be checked against the current official notification before making a compliance decision.<\/p>\n<p>The original order excludes products manufactured for export from its scope. Manufacturers should verify the precise conditions applicable to their transaction rather than assume that all products or sales are exempt.<\/p>\n<p>Official references:<\/p>\n<ul>\n<li><a href=\"https:\/\/bis.gov.in\/wp-content\/uploads\/2023\/12\/Polyethylene-woven-Sacks-QCO.pdf\">Original Fertilizer Woven Sacks Quality Control Order, 2023<\/a><\/li>\n<li><a href=\"https:\/\/www.bis.gov.in\/product-certification\/products-under-compulsory-certification\/scheme-i-mark-scheme\/?lang=en\">BIS Scheme-I product certification information<\/a><\/li>\n<\/ul>\n<h2>3. Types of HDPE\/PP Woven Fertilizer Bags Under IS 9755:2021<\/h2>\n<p>The BIS Product Manual identifies the following product types and scope parameters.<\/p>\n<h3>A. Type I \u2014 45 kg fertilizer bags<\/h3>\n<p>Type I sacks are intended for a nominal capacity of 45 kg, subject to the requirements of IS 9755:2021.<\/p>\n<h3>B. Type II \u2014 50 kg fertilizer bags<\/h3>\n<p>Type II sacks are intended for a nominal capacity of 50 kg, subject to the requirements of the standard.<\/p>\n<p>The BIS Product Manual requires separate sample testing for Type I and Type II sacks. HDPE sacks and PP sacks also require separate samples under the grouping guidelines.<\/p>\n<h3>C. Other product variations<\/h3>\n<p>The licence scope may also distinguish products according to:<\/p>\n<ul>\n<li>HDPE or PP material.<\/li>\n<li>Laminated or unlaminated construction.<\/li>\n<li>Sacks with or without a liner.<\/li>\n<li>UV-stabilized or non-UV-stabilized fabric.<\/li>\n<li>Pigmented or non-pigmented sacks.<\/li>\n<li>Sacks manufactured using pigmented or non-pigmented tapes.<\/li>\n<\/ul>\n<p>These variations must be properly declared and assessed against the current grouping guidelines.<\/p>\n<h2>4. Scope of BIS Licence for Fertilizer Bags<\/h2>\n<p>The BIS Product Manual states that a licence for HDPE\/PP woven fertilizer sacks can cover the relevant material, type and other declared construction features.<\/p>\n<table>\n<tbody>\n<tr>\n<th>Parameter<\/th>\n<th>Details<\/th>\n<\/tr>\n<tr>\n<td>Product<\/td>\n<td>HDPE\/PP woven sacks for packaging fertilizers<\/td>\n<\/tr>\n<tr>\n<td>Standard<\/td>\n<td>IS 9755:2021<\/td>\n<\/tr>\n<tr>\n<td>Material<\/td>\n<td>HDPE or PP<\/td>\n<\/tr>\n<tr>\n<td>Type<\/td>\n<td>Type I or Type II<\/td>\n<\/tr>\n<tr>\n<td>Lamination<\/td>\n<td>With or without lamination<\/td>\n<\/tr>\n<tr>\n<td>Liner<\/td>\n<td>With or without liner<\/td>\n<\/tr>\n<tr>\n<td>UV stabilization<\/td>\n<td>UV-stabilized or non-UV-stabilized<\/td>\n<\/tr>\n<tr>\n<td>Colour<\/td>\n<td>Pigmented or non-pigmented<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>The grouping guidelines require separate sample testing for Type I and Type II, and for HDPE and PP sacks.<\/p>\n<p>Where the relevant raw material and construction are tested as specified, certain variations may be included in the scope without repeating every test. For example, the Product Manual provides conditions under which testing coloured tapes along with white or natural-coloured tapes can support coverage of pigmented or coloured sacks.<\/p>\n<p>Similarly, testing sacks with lamination, liner or UV stabilization may support coverage of corresponding versions without those features, subject to the stated guidelines.<\/p>\n<p>The manufacturer must have the necessary manufacturing and testing facilities for the sizes and product varieties included in the licence scope.<\/p>\n<h2>5. Raw Material Requirements for HDPE\/PP Fertilizer Bags<\/h2>\n<p>Raw material conformity is an important part of BIS certification for woven fertilizer bags.<\/p>\n<p>According to the BIS Product Manual:<\/p>\n<ul>\n<li><strong>HDPE used for manufacturing tapes<\/strong> must conform to IS 10146.<\/li>\n<li><strong>PP used for manufacturing tapes<\/strong> must conform to IS 10910.<\/li>\n<li>Where a liner is used, the permitted liner material may include LDPE, LLDPE, HMHDPE or HDPE, subject to the applicable requirements.<\/li>\n<li>The manufacturer must obtain a test certificate from the raw material supplier for each lot of HDPE, PP or liner received, indicating conformity with the relevant requirements.<\/li>\n<\/ul>\n<p>Where a manufacturer directly purchases HDPE or PP fabric tapes, the tapes must meet the applicable requirements referenced in IS 9755:2021, including IS 6192 or IS 11197, as relevant to the material.<\/p>\n<p>Maintaining raw material purchase records, supplier test certificates, material identification and lot traceability helps demonstrate conformity during certification and ongoing production.<\/p>\n<h2>6. Technical Requirements and Testing for HDPE\/PP Woven Fertilizer Bags<\/h2>\n<p>Product testing is required to demonstrate conformity with IS 9755:2021. The precise test programme depends on the material, type, construction and other applicable product features.<\/p>\n<h3>6.1 Dimensions and construction<\/h3>\n<p>The sack must comply with the specified dimensions and construction requirements.<\/p>\n<p>Testing and inspection may include:<\/p>\n<ul>\n<li>Inside length and width.<\/li>\n<li>Ends per decimetre.<\/li>\n<li>Picks per decimetre.<\/li>\n<li>Fabric mass.<\/li>\n<li>Sack mass.<\/li>\n<li>Construction and visual appearance.<\/li>\n<\/ul>\n<h3>6.2 Fabric strength and elongation<\/h3>\n<p>The woven fabric must meet the relevant breaking-strength and elongation requirements.<\/p>\n<p>These characteristics help assess the fabric&#8217;s ability to withstand the stresses encountered during filling, handling and transportation.<\/p>\n<p>The BIS Product Manual refers to the applicable test methods, including IS 1969 (Part 1), for relevant fabric-strength and elongation testing.<\/p>\n<h3>6.3 Liner requirements<\/h3>\n<p>Where a liner is provided, the applicable requirements may include:<\/p>\n<ul>\n<li>Liner material.<\/li>\n<li>Thickness.<\/li>\n<li>Length and width.<\/li>\n<li>Width allowance relative to the sack.<\/li>\n<li>Bottom sealing of a loose liner.<\/li>\n<\/ul>\n<p>The requirements depend on the liner material and the relevant clauses of the standard.<\/p>\n<h3>6.4 Lamination<\/h3>\n<p>For laminated sacks, applicable tests may include lamination mass and lamination overhang. Relevant requirements should be checked against the standard and the proposed product construction.<\/p>\n<h3>6.5 Bottom seam and stitching<\/h3>\n<p>The bottom seam must meet the applicable construction and strength requirements.<\/p>\n<p>The Product Manual identifies checks relating to bottom-seam strength and stitching arrangements. These are important for reducing the risk of seam failure during filling and handling.<\/p>\n<h3>6.6 Capacity and drop impact strength<\/h3>\n<p>The sack must meet the specified nominal capacity and relevant drop impact requirements.<\/p>\n<p>Drop impact testing evaluates the sack&#8217;s performance under the prescribed test conditions. The exact method and acceptance criteria must be taken from IS 9755:2021.<\/p>\n<h3>6.7 UV resistance<\/h3>\n<p>For sacks made from UV-stabilized material, the applicable UV resistance requirement must be met.<\/p>\n<p>The Product Manual specifies that UV-stabilized HDPE\/PP woven fabric must retain at least <strong>50% of its original breaking strength<\/strong> after exposure to UV radiation and weathering under the prescribed test method.<\/p>\n<p>The relevant breaking-strength measurements and exposure conditions must be evaluated in accordance with the standard.<\/p>\n<h3>6.8 Ash content and other applicable tests<\/h3>\n<p>The standard includes ash-content and other specified tests for relevant product configurations. The applicable tests depend on the sack construction and material.<\/p>\n<p>Manufacturers should not assume that every test applies identically to all variants. The laboratory testing plan should be based on the current standard, the Product Manual and the proposed licence scope.<\/p>\n<h2>7. Sample Requirements for BIS Testing<\/h2>\n<p>The BIS Product Manual for IS 9755:2021 specifies the following sample quantities:<\/p>\n<ul>\n<li><strong>HDPE\/PP granules:<\/strong> 1 kg.<\/li>\n<li><strong>Unlaminated and laminated fabric:<\/strong> 1 metre \u00d7 1 metre, as applicable.<\/li>\n<li><strong>Stitching thread:<\/strong> Required for UV-stabilized sacks, as specified in the manual.<\/li>\n<li><strong>Finished woven sacks:<\/strong> 10 to 12 sacks.<\/li>\n<li><strong>Liners:<\/strong> An equal number of liners may be drawn where the sacks are supplied with liners.<\/li>\n<\/ul>\n<p>The grouping guidelines require separate sample testing for Type I and Type II sacks and for HDPE and PP sacks.<\/p>\n<p>The final sample requirements should be confirmed against the current Product Manual, proposed licence scope and laboratory instructions before sample submission.<\/p>\n<h2>8. BIS Certification Process for HDPE\/PP Woven Fertilizer Bags<\/h2>\n<p>The general certification process under Scheme-I involves the following stages.<\/p>\n<h3>Step 1: Product assessment<\/h3>\n<p>Identify whether the sack is HDPE or PP and whether it is Type I or Type II.<\/p>\n<p>Record the intended capacity, liner, lamination, UV stabilization and pigmentation details.<\/p>\n<h3>Step 2: Standard and QCO review<\/h3>\n<p>Review IS 9755:2021, its applicable amendments, the current BIS Product Manual and the relevant Quality Control Order.<\/p>\n<h3>Step 3: Product grouping and scope planning<\/h3>\n<p>Prepare a model-wise or product-variation list and identify the applicable sample requirements under the grouping guidelines.<\/p>\n<h3>Step 4: Documentation preparation<\/h3>\n<p>Compile the company details, factory information, raw material specifications, manufacturing process, machinery details, quality-control records and supplier test certificates.<\/p>\n<h3>Step 5: BIS application<\/h3>\n<p>Prepare and submit the application through the applicable BIS process, with the prescribed details and supporting documentation.<\/p>\n<h3>Step 6: Sample testing<\/h3>\n<p>Arrange testing according to the applicable standard, Product Manual and product grouping.<\/p>\n<h3>Step 7: Factory inspection and assessment<\/h3>\n<p>Where required, prepare for factory inspection and verification of manufacturing capability, testing arrangements, quality-control procedures and records.<\/p>\n<h3>Step 8: Closure of observations<\/h3>\n<p>Address any observations, nonconformities or requests for additional information raised during assessment.<\/p>\n<h3>Step 9: Licence grant and marking<\/h3>\n<p>Once the licence is granted, the manufacturer must comply with the approved scope, marking requirements, inspection and testing obligations, and other applicable licence conditions.<\/p>\n<p>Certification timelines depend on documentation readiness, testing, inspection requirements and BIS assessment. Consultancy support cannot guarantee approval or a fixed completion date.<\/p>\n<h2>9. Documents Required for BIS Certification<\/h2>\n<p>The final checklist depends on the manufacturer and product configuration. Commonly relevant documents include:<\/p>\n<ul>\n<li>Company registration and applicant details.<\/li>\n<li>Factory address and manufacturing-unit information.<\/li>\n<li>Factory layout and manufacturing process flowchart.<\/li>\n<li>Product specifications and sack drawings.<\/li>\n<li>Type I or Type II classification.<\/li>\n<li>HDPE or PP material details.<\/li>\n<li>Raw material supplier test certificates.<\/li>\n<li>Liner material and thickness details, where applicable.<\/li>\n<li>Lamination details, where applicable.<\/li>\n<li>UV stabilization details, where applicable.<\/li>\n<li>Manufacturing machinery and equipment list.<\/li>\n<li>Quality-control plan and inspection procedures.<\/li>\n<li>Testing equipment and calibration records, where applicable.<\/li>\n<li>Internal inspection and laboratory test reports.<\/li>\n<li>Applicable external laboratory reports.<\/li>\n<li>Production and batch traceability records.<\/li>\n<li>Proposed product scope and grouping details.<\/li>\n<li>Required declarations, undertakings and BIS application forms.<\/li>\n<\/ul>\n<p>This is an indicative checklist. Additional documents may be required under the applicable BIS procedure.<\/p>\n<h2>10. Manufacturing Quality Control and BIS Marking<\/h2>\n<p>Manufacturers must establish suitable quality-control arrangements to ensure that fertilizer bags covered by the licence consistently conform to IS 9755:2021.<\/p>\n<p>The BIS Product Manual provides a Scheme of Inspection and Testing covering raw materials, fabric, liners, lamination, bottom seams, sack capacity, visual inspection, bale mass, UV resistance and other applicable requirements.<\/p>\n<p>Important controls include:<\/p>\n<ul>\n<li>Verifying raw material conformity.<\/li>\n<li>Maintaining supplier test certificates for each relevant material lot.<\/li>\n<li>Inspecting tapes and woven fabric.<\/li>\n<li>Checking sack dimensions and construction.<\/li>\n<li>Controlling stitching and bottom-seam quality.<\/li>\n<li>Verifying liner and lamination requirements where applicable.<\/li>\n<li>Conducting required finished-product tests.<\/li>\n<li>Maintaining calibration and test records.<\/li>\n<li>Separating and controlling nonconforming products.<\/li>\n<\/ul>\n<p>The Product Manual states that the BIS Standard Mark and licence number must be printed legibly and indelibly on each sack, with marking on sacks and bales meeting the applicable requirements of IS 9755:2021 and the licence conditions.<\/p>\n<p>Only conforming products covered by the valid licence may carry the BIS Standard Mark.<\/p>\n<h2>11. BIS Certification Cost for Fertilizer Bags<\/h2>\n<p>The total project cost depends on the product range, testing requirements, manufacturing readiness and applicable BIS charges.<\/p>\n<p>Potential cost components include:<\/p>\n<ol start=\"1\">\n<li>BIS application and certification-related fees.<\/li>\n<li>Product testing and laboratory charges.<\/li>\n<li>Sample preparation and transportation.<\/li>\n<li>Factory inspection-related expenses, where applicable.<\/li>\n<li>Testing equipment and calibration costs, if required.<\/li>\n<li>Documentation and quality-control preparation.<\/li>\n<li>Professional consultancy fees.<\/li>\n<\/ol>\n<p>Testing requirements can vary according to the material, Type I or Type II classification, lamination, liner, UV stabilization and pigmentation.<\/p>\n<p>For a project-specific quotation, manufacturers should share their product specifications, sack type, material, construction details and factory information with Qualitance India.<\/p>\n<h2>12. BIS Certification for Foreign Manufacturers and Exporters<\/h2>\n<p>Overseas manufacturers planning to supply HDPE\/PP woven fertilizer bags to India should determine whether the applicable Indian requirements apply to their intended transaction.<\/p>\n<p>Where BIS certification is compulsory for products supplied to the Indian market, foreign manufacturers should review the applicable certification route and overseas-manufacturer requirements.<\/p>\n<p>These may include:<\/p>\n<ul>\n<li>Eligibility of the overseas manufacturing unit.<\/li>\n<li>Product testing and sample submission.<\/li>\n<li>Manufacturing and quality-control documentation.<\/li>\n<li>Factory inspection and associated arrangements.<\/li>\n<li>Authorized Indian Representative requirements, where applicable.<\/li>\n<li>Licence obligations and use of the BIS Standard Mark.<\/li>\n<\/ul>\n<p>The original QCO excludes products manufactured for export from its scope. This exemption should not be confused with a general exemption for foreign-made goods imported for sale in India.<\/p>\n<p>Qualitance India can assist overseas manufacturers with product classification, documentation, testing coordination and assessment of the applicable BIS certification route.<\/p>\n<h2>13. Why Choose Qualitance India?<\/h2>\n<p>Qualitance India provides BIS certification consultancy and product compliance support for manufacturers of HDPE\/PP woven fertilizer bags.<\/p>\n<p>Our support can include:<\/p>\n<ul>\n<li>Review of IS 9755:2021 and applicable QCO requirements.<\/li>\n<li>Product grouping and licence-scope planning.<\/li>\n<li>Documentation and application preparation support.<\/li>\n<li>Raw material and supplier-document review.<\/li>\n<li>Product testing coordination.<\/li>\n<li>Manufacturing and quality-control readiness assessment.<\/li>\n<li>Factory inspection preparation.<\/li>\n<li>Assistance with compliance observations and documentation gaps.<\/li>\n<li>Guidance for overseas manufacturers on applicable BIS requirements.<\/li>\n<\/ul>\n<p>Our objective is to help manufacturers understand the applicable requirements, prepare accurate documentation and manage the certification process in a structured manner.<\/p>\n<h2>14. Frequently Asked Questions (FAQs)<\/h2>\n<h3>Q1. What is IS 9755:2021?<\/h3>\n<p>IS 9755:2021 is the Indian Standard titled <em>Textiles \u2014 High Density Polyethylene (HDPE)\/Polypropylene (PP) Woven Sacks for Packaging Fertilizers \u2014 Specification<\/em>.<\/p>\n<h3>Q2. Is BIS certification mandatory for HDPE\/PP woven fertilizer bags?<\/h3>\n<p>Yes. The applicable Quality Control Order requires covered HDPE\/PP woven fertilizer sacks to conform to IS 9755:2021 and bear the BIS Standard Mark under a valid licence, subject to applicable provisions and exemptions.<\/p>\n<h3>Q3. What is the difference between Type I and Type II fertilizer bags?<\/h3>\n<p>The BIS Product Manual identifies Type I as a 45 kg sack and Type II as a 50 kg sack. Separate samples are required for Type I and Type II under the grouping guidelines.<\/p>\n<h3>Q4. Can HDPE and PP fertilizer bags be covered by the same test sample?<\/h3>\n<p>The BIS Product Manual requires separate sample testing for HDPE sacks and PP sacks. The applicable product grouping and scope must be determined under the current manual.<\/p>\n<h3>Q5. Are laminated and unlaminated sacks covered?<\/h3>\n<p>The licence scope can identify sacks with or without lamination, subject to the grouping guidelines, sample results and manufacturing and testing capability.<\/p>\n<h3>Q6. Is UV resistance testing required?<\/h3>\n<p>For UV-stabilized sacks, the applicable UV resistance requirements must be met. The Product Manual specifies at least 50% retention of original breaking strength after the prescribed UV radiation and weathering exposure.<\/p>\n<h3>Q7. How many sacks are required for testing?<\/h3>\n<p>The Product Manual specifies 10 to 12 woven sacks, along with the applicable raw material, fabric, thread and liner samples. The exact submission should be confirmed for the proposed product scope.<\/p>\n<h3>Q8. What raw material standards apply?<\/h3>\n<p>The Product Manual specifies IS 10146 for HDPE used in tape manufacture and IS 10910 for PP. Liner materials may include LDPE, LLDPE, HMHDPE or HDPE, subject to the applicable requirements.<\/p>\n<h3>Q9. Can foreign manufacturers obtain BIS certification?<\/h3>\n<p>Foreign manufacturers may apply through the applicable BIS certification arrangements where eligible. The correct route and any Authorized Indian Representative requirements should be confirmed for the specific application.<\/p>\n<h3>Q10. Can Qualitance India assist with product testing?<\/h3>\n<p>Yes. Qualitance India can assist with test planning, sample coordination, laboratory coordination and documentation support, subject to the applicable BIS process and laboratory capabilities.<\/p>\n<h2>15. Official References<\/h2>\n<p>For accurate compliance planning, consult the following official resources:<\/p>\n<ol start=\"1\">\n<li><strong>BIS Product Manual for IS 9755:2021:<\/strong><br \/>\n<a href=\"https:\/\/www.bis.gov.in\/wp-content\/uploads\/2023\/08\/PM-9755-Aug-2023.pdf\">https:\/\/www.bis.gov.in\/wp-content\/uploads\/2023\/08\/PM-9755-Aug-2023.pdf<\/a><\/li>\n<li><strong>Textiles\u2014HDPE\/PP Woven Sacks for Packaging Fertilizers (Quality Control) Order, 2023:<\/strong><br \/>\n<a href=\"https:\/\/bis.gov.in\/wp-content\/uploads\/2023\/12\/Polyethylene-woven-Sacks-QCO.pdf\">https:\/\/bis.gov.in\/wp-content\/uploads\/2023\/12\/Polyethylene-woven-Sacks-QCO.pdf<\/a><\/li>\n<li><strong>BIS Scheme-I product certification information:<\/strong><br \/>\n<a href=\"https:\/\/www.bis.gov.in\/product-certification\/products-under-compulsory-certification\/scheme-i-mark-scheme\/?lang=en\">https:\/\/www.bis.gov.in\/product-certification\/products-under-compulsory-certification\/scheme-i-mark-scheme\/?lang=en<\/a><\/li>\n<li><strong>BIS Laboratory Information Management System for IS 9755:2021:<\/strong><br \/>\n<a href=\"https:\/\/lims.bis.gov.in\/home\/search_is_number\/?is_number__doc_no=9755\">https:\/\/lims.bis.gov.in\/home\/search_is_number\/?is_number__doc_no=9755<\/a><\/li>\n<\/ol>\n<p>Verify the latest QCO amendments, implementation dates, exemptions, standard amendments and BIS certification instructions before making a compliance decision.<\/p>\n<h2>Conclusion<\/h2>\n<p>BIS certification for HDPE\/PP woven fertilizer bags under IS 9755:2021 involves raw material conformity, product grouping, fabric and sack testing, stitching and liner requirements, drop impact strength, UV resistance where applicable, documentation and factory quality-control arrangements.<\/p>\n<p>Manufacturers should define their Type I or Type II product range, material, construction and optional features before preparing samples and applying for certification. They should also verify the latest Quality Control Order and implementation requirements applicable to their business.<\/p>\n<p><strong>Qualitance India<\/strong> provides BIS certification consultancy, product testing coordination, documentation support and manufacturing compliance guidance for HDPE\/PP woven fertilizer bags.<\/p>\n<p>Contact us to discuss your product specifications, manufacturing facility, testing requirements and applicable certification route.<\/p>\n<p><strong>Qualitance India \u2014 Improving Quality &amp; Competence<\/strong><\/p>\n<p><strong>Call \/ WhatsApp:<\/strong> +91 9310615170<br \/>\n<strong>Email:<\/strong> <a href=\"mailto:info@qualitanceindia.com\">info@qualitanceindia.com<\/a><br \/>\n<strong>Website:<\/strong> <a href=\"https:\/\/qualitanceindia.com\/\">https:\/\/qualitanceindia.com<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>INTRODUCTION Manufacturers of fertilizer packaging bags must ensure that their products meet the applicable requirements for strength, dimensions, material quality, stitching, drop resistance and other specified performance characteristics. These requirements are important for protecting fertilizers during storage, handling and transportation. In India, HDPE and PP woven sacks used for packaging fertilizers are covered by IS [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":4143,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_forum_subforum_count":0,"inline_featured_image":false,"slim_seo":{"title":"BIS Certification Consultant for HDPE\/PP Woven Fertilizer Bags | IS 9755:2021 | Qualitance India - Qualitance India","description":"INTRODUCTION Manufacturers of fertilizer packaging bags must ensure that their products meet the applicable requirements for strength, dimensions, material qual"},"_slim_seo_primary_term_category":1,"_slim_seo_primary_term_post_tag":0,"footnotes":""},"categories":[46,1,47],"tags":[],"class_list":["post-4142","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-bis-certification","category-blog","category-manufacturers"],"_links":{"self":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4142","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/comments?post=4142"}],"version-history":[{"count":3,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4142\/revisions"}],"predecessor-version":[{"id":4146,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/posts\/4142\/revisions\/4146"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media\/4143"}],"wp:attachment":[{"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/media?parent=4142"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/categories?post=4142"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/qualitanceindia.com\/wp-json\/wp\/v2\/tags?post=4142"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}