BIS Certification Consultancy for Rubber Hawai Chappal | IS 10702:1992

Introduction

Rubber Hawai Chappals are commonly used everyday footwear in India because they are lightweight, economical, comfortable and suitable for regular use. Their quality depends on the rubber material, construction, dimensions, sole properties, straps and overall workmanship.

For manufacturers producing Rubber Hawai Chappals, following the applicable Indian Standard helps maintain consistency in product quality and performance.

IS 10702:1992 – Rubber Hawai Chappals – Specification specifies requirements applicable to Rubber Hawai Chappals.

Qualitance India provides BIS Certification Consultancy for Rubber Hawai Chappals as per IS 10702:1992, including assistance with product assessment, documentation, testing, BIS application and factory inspection preparation.

Product ke baare mein

Rubber Hawai Chappals are open footwear generally consisting of a rubber sole with straps or thongs designed to hold the footwear on the foot.

They are commonly used for:

Daily wear
Household use
Outdoor use
Casual footwear
General-purpose applications
Institutional footwear supply

The quality and durability of Hawai Chappals depend on:

Rubber compound
Sole construction
Thickness
Dimensions
Flexibility
Abrasion resistance
Strap quality
Strap attachment
Surface finish
Workmanship

Proper manufacturing controls are therefore important for maintaining consistent product quality.

Applicable IS Standard

The applicable Indian Standard is:

IS 10702:1992 – Rubber Hawai Chappals – Specification

Manufacturers should verify the latest applicable edition, amendments and current BIS requirements before beginning the certification process.

Scope of Standard

IS 10702:1992 specifies requirements for Rubber Hawai Chappals.

The standard addresses applicable requirements relating to the construction and performance of the footwear.

Important characteristics may include:

Dimensions
Sole thickness
Rubber quality
Physical properties
Flexibility
Abrasion resistance
Strap characteristics
Strap attachment
Workmanship
Appearance

The exact requirements and test methods should be followed according to the applicable provisions of IS 10702:1992.

Product Requirements

Rubber Hawai Chappals should meet the applicable requirements specified under IS 10702:1992.

Dimensions

The chappal should conform to applicable dimensional requirements.

Sole

The sole should have suitable thickness, construction and physical properties for its intended use.

Rubber Material

The rubber compound should provide the required performance characteristics.

Flexibility

The footwear should have suitable flexibility for normal use.

Abrasion Resistance

The sole should provide adequate resistance to wear during regular use.

Straps

The straps should have suitable strength and construction.

Strap Attachment

The strap should be securely attached to the sole and should withstand normal use.

Workmanship

The finished product should be free from unacceptable manufacturing defects.

Appearance

The chappal should have a satisfactory finish and should not have defects affecting its usability.

Testing Requirements

Testing is an important part of assessing Rubber Hawai Chappals.

Depending on the applicable requirements, testing may cover:

Dimensions
Sole thickness
Physical properties of rubber
Hardness
Tensile properties
Elongation
Abrasion resistance
Flexing characteristics
Strap strength
Strap attachment
Other applicable characteristics

Testing should be conducted according to the applicable methods specified in IS 10702:1992 and its referenced standards.

Rubber Material Testing

The rubber used for manufacturing the chappal should have consistent characteristics.

Applicable checks may include:

Hardness
Tensile strength
Elongation
Abrasion resistance
Density or other relevant characteristics
Visual quality

The exact testing requirements should be determined from the applicable standard and product scope.

Sole Testing

The sole is the primary load-bearing part of a Hawai Chappal.

Quality checks can include:

Sole thickness
Dimensions
Rubber properties
Abrasion resistance
Flexibility
Surface condition
Workmanship

Consistent sole quality helps improve the durability and usability of the finished footwear.

Strap Testing

The straps are important because they hold the footwear securely on the foot.

Quality checks may include:

Strap dimensions
Material quality
Strength
Flexibility
Attachment to sole
Resistance to normal pulling forces

Poor strap attachment can result in premature failure during use.

Raw Material Requirements

The principal raw material for Rubber Hawai Chappals is rubber or a suitable rubber compound.

Other materials may include:

Rubber compounds
Pigments
Processing chemicals
Vulcanizing agents
Fillers
Plasticizers
Straps
Other additives

Manufacturers should maintain proper controls over raw materials.

Important records may include:

Supplier details
Material specifications
Batch numbers
Material test reports
Incoming inspection records
Compound formulation records
Storage records
Material traceability

Manufacturing Requirements

A typical Rubber Hawai Chappal manufacturing process may include:

Raw-material procurement
Incoming material inspection
Rubber compound preparation
Mixing
Sheet or sole material preparation
Cutting or moulding
Vulcanization
Sole finishing
Hole formation
Strap preparation
Strap fitting
Trimming
Dimension inspection
Physical testing
Visual inspection
Sorting
Packing
Marking
Final inspection

The actual process can vary depending on the manufacturer's production technology and machinery.

BIS Certification Process

Step 1 – Product Assessment

The Rubber Hawai Chappal is reviewed against the requirements of IS 10702:1992.

Step 2 – Product Scope Identification

Applicable sizes, designs and product varieties are identified.

Step 3 – Factory Assessment

Manufacturing machinery and production arrangements are reviewed.

Step 4 – Testing Facility Review

Applicable testing facilities and equipment are assessed.

Step 5 – Documentation

Required technical and factory documents are prepared.

Step 6 – Sample Preparation

Representative samples are selected for testing.

Step 7 – Laboratory Testing

Samples are tested against the applicable requirements.

Step 8 – BIS Application

The application and supporting documents are submitted to BIS.

Step 9 – Application Scrutiny

BIS reviews the submitted information and documentation.

Step 10 – Factory Inspection

The manufacturing facility may be inspected to verify production and quality-control arrangements.

Step 11 – Observation Closure

Any observations or deficiencies are addressed.

Step 12 – Licence Grant

After successful completion of applicable requirements, the BIS licence is granted for the approved product scope.

Documents Required

Typical documents may include:

Company registration documents
Factory address proof
Factory layout
Manufacturing process flow
Machinery list
Product specifications
Product drawings
Size details
Rubber compound details
Raw-material specifications
Raw-material test reports
Internal test reports
Laboratory test reports
Testing equipment list
Calibration certificates
Quality-control plan
Inspection records
Production records
Product photographs
Packing details
Marking details
Authorised signatory documents
Trademark documents, where applicable

The exact documents depend on the applicant and proposed certification scope.

Factory Inspection

Factory inspection helps verify the manufacturer's ability to consistently produce conforming Rubber Hawai Chappals.

The inspection may cover:

Raw Material Storage

Rubber and other materials should be properly identified and stored.

Rubber Mixing

Mixing machinery and compound preparation procedures may be assessed.

Moulding or Vulcanization

Production equipment and process controls may be inspected.

Sole Production

Sole dimensions, thickness and finishing arrangements may be reviewed.

Strap Production

Strap manufacturing and fitting arrangements may be checked.

Testing Facilities

Applicable testing equipment should be available or suitable testing arrangements should be maintained.

Calibration

Testing and measuring equipment should have appropriate calibration or verification records.

Quality Control

Incoming, in-process and final inspection procedures should be maintained.

Records

Production, inspection, testing and calibration records should be available.

Product Quality Checks

Manufacturers should perform quality checks at different stages of production.

These may include:

Raw-material inspection
Rubber compound inspection
Sole dimensions
Sole thickness
Hardness
Tensile properties
Elongation
Abrasion resistance
Flexibility
Strap dimensions
Strap strength
Strap attachment
Surface finish
Visual inspection
Workmanship
Size verification
Final product inspection
Packing inspection
Marking verification

Common Reasons for Testing/Certification Failure

Common reasons for non-conformity may include:

Incorrect sole dimensions
Incorrect sole thickness
Poor rubber quality
Hardness outside the required range
Low tensile strength
Unsatisfactory elongation
Poor abrasion resistance
Insufficient flexibility
Weak straps
Poor strap attachment
Surface defects
Improper vulcanization
Dimensional variation
Poor workmanship
Inadequate testing facilities
Missing calibration records
Incorrect sampling
Incomplete documentation
Incorrect product specifications
Improper marking

Pre-testing and effective quality control can help reduce avoidable failures.

BIS Marking

After certification, the manufacturer must comply with the applicable BIS marking requirements and conditions of the licence.

Applicable marking information may include:

BIS Standard Mark
Licence number
Manufacturer identification
Product identification
Size
Batch or lot information
Other required details

The exact marking format should be followed according to the current BIS certification requirements.

Who Needs BIS Certification

Manufacturers producing Rubber Hawai Chappals should assess the current BIS and regulatory requirements applicable to their products.

This may include:

Rubber footwear manufacturers
Hawai Chappal manufacturers
Footwear manufacturers
Rubber product manufacturers
Footwear component manufacturers
Private-label footwear manufacturers
Institutional footwear suppliers
General-purpose footwear suppliers

Where BIS certification is mandatory under the applicable regulatory framework, the manufacturer must meet the relevant requirements before supplying the product.

Cost

The total cost of BIS Certification depends on factors such as:

BIS application charges
Laboratory testing charges
Number of sizes
Product varieties
Sample requirements
Factory inspection
Testing equipment
Calibration
Retesting, if required
Consultancy charges

The actual cost can be estimated after reviewing the manufacturer's product range and proposed certification scope.

Timeline

The certification timeline depends on:

Product readiness
Documentation
Sample preparation
Laboratory availability
Testing
BIS application scrutiny
Factory inspection
Closure of observations

Complete documentation and proper testing arrangements can help reduce unnecessary delays.

Benefits

Consistent Product Quality

Testing and quality control help maintain uniform Rubber Hawai Chappal quality.

Better Durability

Proper control of rubber properties, sole construction and straps can improve product durability.

Customer Confidence

Compliance with applicable standards can increase customer confidence.

Market Acceptance

Meeting applicable Indian Standard requirements can support market acceptance.

Better Quality Control

The certification process encourages systematic inspection and testing.

Business Credibility

Compliance with relevant standards can strengthen the manufacturer's credibility in the footwear industry.

Why Choose Qualitance India

Qualitance India provides BIS Certification Consultancy for footwear, rubber products, footwear components and other industrial products.

For Rubber Hawai Chappals as per IS 10702:1992, our support can include:

Product applicability assessment
IS 10702:1992 requirement review
Product scope assessment
Documentation assistance
Testing requirement identification
Laboratory testing coordination
Sample preparation guidance
BIS application assistance
Factory inspection preparation
Testing equipment guidance
Quality-control documentation
Observation closure support
Certification assistance

We help manufacturers organise the certification process from product assessment through testing and factory inspection.

Complete Process

Product Identification
↓
IS 10702:1992 Requirement Review
↓
Size & Product Scope Assessment
↓
Raw Material & Rubber Compound Review
↓
Manufacturing Facility Assessment
↓
Documentation Preparation
↓
Sample Preparation
↓
Laboratory Testing
↓
BIS Application
↓
Application Scrutiny
↓
Factory Inspection
↓
Observation Closure
↓
BIS Licence / Certification
↓
Applicable BIS Marking

20 FAQs

1. What is a Rubber Hawai Chappal?

A Rubber Hawai Chappal is open footwear generally consisting of a rubber sole and straps designed for everyday use.

2. What is IS 10702:1992?

IS 10702:1992 is the Indian Standard for Rubber Hawai Chappals – Specification.

3. What are Rubber Hawai Chappals used for?

They are commonly used as general-purpose everyday footwear.

4. What properties are important for Rubber Hawai Chappals?

Important properties may include sole dimensions, thickness, rubber characteristics, strength, abrasion resistance, flexibility and strap performance.

5. Is rubber hardness tested?

Hardness may be one of the applicable physical characteristics assessed according to the standard.

6. Is tensile strength important?

Yes. Tensile properties help assess the strength and performance of the rubber material.

7. Is abrasion resistance important?

Yes. The sole is exposed to repeated contact with walking surfaces, making abrasion resistance an important property.

8. Are straps tested?

Applicable requirements relating to straps and their attachment should be evaluated according to the standard.

9. Is sole thickness checked?

Yes. Applicable dimensional requirements should be verified.

10. What raw materials are used?

Rubber compounds and associated processing materials are commonly used for manufacturing Rubber Hawai Chappals.

11. Is factory inspection required?

Factory assessment may form part of the applicable BIS certification process.

12. What documents are required?

Factory documents, product specifications, manufacturing information, raw-material details, testing records and quality-control documents may be required.

13. Are testing facilities required?

Suitable testing arrangements should be available for the applicable product requirements.

14. What can cause testing failure?

Poor rubber quality, incorrect dimensions, inadequate strength, abrasion failure, strap problems and poor workmanship can result in non-conformity.

15. Can different sizes be covered?

The applicable certification scope and product-grouping requirements determine the sizes and varieties that can be covered.

16. How much does BIS Certification cost?

The cost depends on testing, product scope, factory inspection and other applicable expenses.

17. How long does BIS Certification take?

The timeline depends on documentation, testing, application processing, factory inspection and closure of observations.

18. Can Qualitance India assist with laboratory testing?

Yes. Qualitance India can assist with laboratory-testing coordination and related certification requirements.

19. Can Qualitance India help with the BIS application?

Yes. Consultancy support can include documentation preparation and BIS application assistance.

20. Why should manufacturers follow IS 10702:1992?

Following the applicable standard helps manufacturers maintain consistent quality and performance of Rubber Hawai Chappals.

Related BIS Certification Services

BIS Certification for Rubber Soles
BIS Certification for Polyurethane Soles
BIS Certification for PVC Footwear
BIS Certification for PVC Sandals
BIS Certification for Sports Footwear
BIS Certification for Footwear Products
BIS Certification for Rubber Products
BIS Certification for Footwear Components
ISI Mark Certification
BIS Testing Assistance
BIS Factory Inspection Assistance

Contact Qualitance India

Phone: +91 93106 15170
Email: info@qualitanceindia.com
Website: qualitanceindia.com

For assistance with BIS Certification Consultancy for Rubber Hawai Chappal as per IS 10702:1992, contact Qualitance India for product assessment, documentation, laboratory testing coordination, BIS application and factory inspection support.

Conclusion

Rubber Hawai Chappals are widely used as general-purpose footwear because they are lightweight, economical and convenient for everyday use. Consistent rubber quality, sole construction, dimensions, flexibility, abrasion resistance and strap performance are important for producing a reliable product.

IS 10702:1992 – Rubber Hawai Chappals – Specification provides applicable requirements for these footwear products. Manufacturers should maintain proper control over raw materials, rubber compounding, production, vulcanization, sole formation, strap attachment and final inspection.

The certification process can involve product assessment, documentation, sample preparation, laboratory testing, BIS application, factory inspection and completion of applicable requirements.

Qualitance India provides BIS Certification Consultancy for Rubber Hawai Chappals as per IS 10702:1992, supporting manufacturers with product assessment, documentation, testing coordination, BIS application and factory inspection preparation.

Phone: +91 93106 15170
Email: info@qualitanceindia.com
Website: qualitanceindia.com