BIS Certification for A.C. Motor Capacitors – IS 2993 (Part 1):2024 & Part 2:2024

Introduction

BIS Certification for A.C. Motor Capacitors is an important compliance requirement for manufacturers supplying covered motor capacitors in the Indian market. The relevant Indian Standard is IS 2993, which covers requirements relating to the performance, testing, rating and safety of A.C. motor capacitors.

The IS 2993 standard has been revised into IS 2993 (Part 1):2024 and IS 2993 (Part 2):2024. Part 1 deals with general requirements for A.C. motor capacitors, while Part 2 specifically deals with motor start capacitors.

Manufacturers seeking BIS certification need to establish compliance through applicable product testing, technical documentation, manufacturing controls, quality-control arrangements and the BIS certification process. The exact certification scope depends on the type, ratings, construction and application of the capacitor.

About A.C. Motor Capacitors

A.C. motor capacitors are electrical components used with AC motors to support motor starting, running or other operating functions.

These capacitors are commonly used in electrical and motor-driven equipment where appropriate capacitance and phase-shifting characteristics are required for motor operation.

The performance and safety of a motor capacitor can directly affect the operation and reliability of the equipment in which it is installed. Therefore, appropriate product specifications, testing and quality control are important.

Depending on the product design, manufacturers may produce different capacitor variants with different:

Capacitance values
Rated voltages
Frequencies
Operating conditions
Climatic categories
Safety classifications
Construction types
Application requirements

For BIS certification, these characteristics need to be properly assessed before defining the certification scope.

What is BIS Certification?

BIS Certification is a conformity assessment system operated by the Bureau of Indian Standards (BIS).

For products covered under compulsory certification requirements, manufacturers are required to demonstrate compliance with the applicable Indian Standard and obtain the appropriate BIS licence before using the Standard Mark in accordance with BIS requirements.

For A.C. motor capacitors, the applicable Indian Standard is IS 2993.

BIS certification helps demonstrate that the certified product has been evaluated against the applicable requirements and that the manufacturer maintains appropriate production and quality-control systems.

What is IS 2993?

IS 2993 is the Indian Standard relating to A.C. Motor Capacitors.

The standard has undergone revision, and the current series consists of:

IS 2993 (Part 1):2024 – A.C. Motor Capacitors – Part 1: General – Performance, Testing and Rating – Safety Requirements – Guidance for Installation and Operation.

IS 2993 (Part 2):2024 – A.C. Motor Capacitors – Part 2: Motor Start Capacitors.

The revised standards are aligned with the relevant IEC 60252 series.

Manufacturers should therefore identify the correct current part of IS 2993 applicable to their products before beginning the BIS certification process.

Scope of IS 2993

IS 2993 deals with A.C. motor capacitors and establishes requirements relating to product performance, testing, rating and safety.

The applicable requirements may cover areas such as:

Electrical performance
Capacitance
Rated voltage
Frequency
Mechanical characteristics
Electrical strength
Insulation
Endurance
Climatic conditions
Sealing
Self-healing characteristics
Safety
Marking
Product construction

The exact requirements depend on the applicable part of the standard and the characteristics of the product.

IS 2993 Part 1:2024

IS 2993 Part 1:2024 covers general requirements for A.C. motor capacitors.

It addresses requirements associated with:

Performance
Testing
Rating
Safety
Installation
Operation
Electrical characteristics
Mechanical characteristics
Climatic categories
Endurance

The standard is based on the relevant IEC 60252-1 requirements with the applicable amendment.

IS 2993 Part 2:2024

IS 2993 Part 2:2024 specifically deals with Motor Start Capacitors.

Manufacturers producing motor start capacitors should assess their products against the requirements of Part 2 and the applicable BIS Product Manual before applying for certification.

The standard is based on the relevant IEC 60252-2 requirements with the applicable amendment.

Products Covered

Depending on the applicable standard and product characteristics, the certification scope may include different types of A.C. motor capacitors, such as:

A.C. motor capacitors
Motor run capacitors
Motor start capacitors
Self-healing capacitors
Non-self-healing capacitors
Different capacitance-rated capacitors
Different voltage-rated capacitors
Capacitors for different operating conditions
Capacitors having different climatic categories
Capacitors having different safety classifications

The exact product scope should always be confirmed according to the latest applicable BIS Product Manual and grouping provisions.

Mandatory BIS Certification for A.C. Motor Capacitors

BIS includes A.C. motor capacitors under IS 2993 in its compulsory certification framework.

Therefore, manufacturers dealing with covered A.C. motor capacitors should determine their applicable BIS certification requirements before manufacturing or placing the product on the Indian market.

The manufacturer must comply with the applicable BIS requirements relating to:

Product standard
Testing
Manufacturing
Quality control
Product marking
Documentation
Inspection
Surveillance
Licence conditions

Who Needs BIS Certification?

BIS certification may be applicable to manufacturers producing covered A.C. motor capacitors for the Indian market.

This can include:

AC motor capacitor manufacturers
Motor start capacitor manufacturers
Motor run capacitor manufacturers
Electrical component manufacturers
Capacitor manufacturers
OEM manufacturers
Private-label manufacturers
Eligible foreign manufacturers
Manufacturers supplying capacitors to motor and equipment manufacturers

Importers and businesses involved in the supply of covered products should also verify the applicable certification obligations.

Eligibility Criteria for BIS Certification

Before applying for BIS certification, the manufacturer should have appropriate manufacturing and quality-control arrangements.

The factory should generally have:

Suitable manufacturing machinery
Production facilities
Inspection facilities
Testing arrangements
Quality-control procedures
Trained technical personnel
Calibration arrangements
Raw-material inspection
Finished-product inspection
Production records
Test records
Traceability arrangements

The manufacturer should also have appropriate technical documentation for the products being submitted for certification.

Complete BIS Certification Process

Step 1 – Product Identification

First, identify the exact type of A.C. motor capacitor being manufactured.

The product specifications should be reviewed carefully.

Step 2 – Applicable Standard Identification

Determine whether the product falls under:

IS 2993 Part 1:2024

IS 2993 Part 2:2024

or another applicable requirement.

Step 3 – Product Scope Assessment

Review the product's:

Capacitance
Rated voltage
Frequency
Application
Safety classification
Climatic category
Construction
Operation class

Step 4 – Product Grouping

If the manufacturer has multiple capacitor models, product grouping should be assessed according to the applicable BIS Product Manual.

Proper grouping can help determine which representative products and variants need to be submitted for testing.

Step 5 – Factory Assessment

The manufacturer's production facilities and quality-control system should be reviewed before applying.

Step 6 – Documentation Preparation

All required technical, manufacturing and legal documents should be prepared.

Step 7 – Sample Preparation

Representative samples should be prepared according to the applicable requirements.

Step 8 – Product Testing

Samples are tested against the applicable requirements of IS 2993.

Step 9 – BIS Application

The manufacturer submits the BIS application with the required documents and supporting information.

Step 10 – Application Scrutiny

BIS reviews the application and supporting technical information.

Step 11 – Factory Inspection

Where applicable, BIS assesses the manufacturing facility, production process, testing arrangements and quality-control system.

Step 12 – Observation Closure

If BIS raises technical or documentary observations, the manufacturer must provide appropriate clarification or corrective action.

Step 13 – Licence Grant

After successful completion of the applicable assessment and compliance requirements, BIS may grant the licence.

Step 14 – ISI Mark Compliance

The manufacturer may use the applicable Standard Mark only according to the conditions of the BIS licence.

Step 15 – Ongoing Compliance

After obtaining the licence, the manufacturer must continue complying with applicable testing, inspection, quality-control and surveillance requirements.

Required Documents for BIS Certification

The exact documentation depends on the BIS application and product scope, but commonly required documents may include:

Company registration documents
Factory registration documents
Factory address proof
Factory layout
Manufacturing process flow chart
Machinery list
Testing equipment list
Calibration certificates
Product drawings
Product specifications
Technical datasheets
Bill of materials
Raw-material details
Quality-control plan
Internal test reports
Manufacturing process details
Finished-product inspection records
Marking details
Packaging details
Trademark documents
Authorized signatory documents
BIS application documents
Applicable declarations and undertakings

Testing Requirements for A.C. Motor Capacitors

Testing is one of the most important stages of BIS certification.

Depending on the applicable product and standard requirements, testing can include:

Capacitance Test

The capacitance value of the capacitor is verified against the declared rating.

Voltage Test

The capacitor is subjected to applicable electrical voltage tests to assess electrical strength and safety.

Loss Characteristics

Applicable electrical loss characteristics are evaluated.

Insulation Test

The insulation performance of the capacitor is assessed where applicable.

Mechanical Tests

Mechanical integrity and construction are evaluated according to the applicable requirements.

Sealing Test

Where applicable, the sealing performance of the capacitor is assessed.

Endurance Test

The capacitor is subjected to specified operating conditions to evaluate its endurance performance.

Damp Heat Test

The capacitor is exposed to specified climatic conditions to evaluate its performance under humidity and temperature conditions.

Self-Healing Test

Applicable self-healing capacitors may require specific self-healing evaluation.

Destruction Test

Applicable product designs may require evaluation of failure or destruction characteristics.

Heat, Fire and Tracking Tests

Applicable materials and construction may be assessed for resistance to heat, fire and tracking.

Product Grouping for IS 2993

Product grouping is particularly important for manufacturers having multiple AC motor capacitor models.

The manufacturer may have different products based on:

Capacitance
Rated voltage
Frequency
Operation
Safety classification
Climatic category
Self-healing characteristics
Construction

The applicable BIS Product Manual should be followed to determine the correct grouping and representative samples.

Incorrect grouping can result in additional testing, delays or changes to the proposed BIS licence scope.

Factory Inspection Process

Factory inspection is an important part of the BIS certification process.

During assessment, the manufacturing facility may be evaluated for:

Raw Material Control

The manufacturer should maintain appropriate control over incoming materials and components.

Manufacturing Process

BIS may review the complete manufacturing process from raw material to finished capacitor.

Quality Control

The manufacturer should have suitable inspection and testing procedures.

Testing Facilities

Required testing equipment should be available as applicable to the certification requirements.

Calibration

Testing and measuring equipment should have valid calibration arrangements.

Records

The manufacturer should maintain appropriate production and testing records.

Rejection Control

Rejected products should be properly identified and controlled.

Product Marking

Marking should comply with the applicable BIS requirements and licence conditions.

Common Reasons for BIS Application Rejection

Some common issues that can delay or affect a BIS application include:

Selecting the wrong Indian Standard
Not assessing the latest revised standard
Incorrect product grouping
Incomplete documentation
Incorrect product specifications
Inconsistent technical information
Failed laboratory testing
Inadequate testing facilities
Invalid calibration certificates
Incorrect product marking
Incomplete manufacturing records
Insufficient quality-control arrangements
Factory inspection observations
Failure to close technical observations
Incorrect sample selection
Failure to meet applicable testing requirements

Proper preparation before submitting the application can significantly reduce avoidable delays.

BIS Certification Cost

There is no single fixed price for BIS certification of A.C. motor capacitors.

The overall cost can depend on:

Number of products
Product variants
Product grouping
Number of samples
Laboratory testing charges
Test duration
Factory inspection
Documentation requirements
Testing equipment
Calibration
Consultancy
Re-testing, if required

Therefore, the exact cost should be assessed after reviewing the manufacturer's product range and certification scope.

BIS Certification Timeline

The certification timeline depends on several factors, including:

Product complexity
Number of variants
Sample availability
Laboratory availability
Testing duration
Documentation readiness
Factory readiness
BIS scrutiny
Inspection scheduling
Technical observations
Re-testing requirements

Manufacturers should avoid committing to a fixed timeline before assessing the complete product and testing requirements.

Benefits of BIS Certification

Regulatory Compliance

BIS certification helps manufacturers comply with applicable mandatory certification requirements.

Product Quality

Testing and quality-control requirements help promote consistent product quality.

Customer Confidence

BIS certification can increase confidence among customers, OEMs, distributors and industrial buyers.

Market Acceptance

Compliance supports the lawful supply of covered products in the Indian market.

Brand Credibility

The applicable BIS Standard Mark can strengthen the credibility of a compliant product.

Better Manufacturing Control

The BIS process encourages systematic control over:

Raw materials
Production
Testing
Inspection
Documentation
Traceability

Why Choose Qualitance India?

Qualitance India provides professional BIS Certification Consultancy for A.C. Motor Capacitors and other electrical products.

Our consultancy support can include:

BIS Applicability Assessment
IS 2993 Scope Assessment
Product Grouping Guidance
Technical Documentation
BIS Application Assistance
Laboratory Coordination
Product Testing Coordination
Sample Preparation Guidance
Factory Inspection Preparation
Quality-Control Documentation
Technical Query Support
ISI Mark Compliance Guidance
End-to-End BIS Certification Support

Contact Qualitance India

Phone: +91-9310-615-170
Email: info@qualitanceindia.com
Website: qualitanceindia.com

Qualitance India – Improving Quality and Competence

BIS Certification Flow Chart – Text Format

Product Identification
↓
IS 2993 Applicability Assessment
↓
Part 1 / Part 2 Identification
↓
Product Specification Review
↓
Product Grouping
↓
Factory Readiness Assessment
↓
Documentation Preparation
↓
Sample Preparation
↓
Laboratory Testing
↓
BIS Application Submission
↓
Application Scrutiny
↓
Factory Inspection
↓
Observation Closure
↓
BIS Licence Grant
↓
ISI Mark Compliance
↓
Ongoing Compliance

25 SEO FAQs

1. Is BIS Certification mandatory for A.C. Motor Capacitors?

Yes, covered A.C. motor capacitors are included under the applicable compulsory BIS certification framework.

2. What is IS 2993?

IS 2993 is the Indian Standard applicable to A.C. Motor Capacitors.

3. What is the latest version of IS 2993?

The standard has been revised into IS 2993 Part 1:2024 and IS 2993 Part 2:2024.

4. What does IS 2993 Part 1:2024 cover?

It covers general requirements, performance, testing, rating and safety requirements for applicable A.C. motor capacitors.

5. What does IS 2993 Part 2:2024 cover?

Part 2 specifically covers motor start capacitors.

6. Is BIS certification required for motor start capacitors?

Covered motor start capacitors need to comply with the applicable IS 2993 Part 2 requirements.

7. What tests are required for A.C. motor capacitors?

Depending on the product, applicable tests can include capacitance, voltage, insulation, mechanical, sealing, endurance, damp heat, self-healing, destruction and heat/fire/tracking-related tests.

8. What documents are required for BIS certification?

Documents may include factory details, product drawings, specifications, manufacturing process, machinery details, testing equipment, calibration records, quality-control documents and product marking details.

9. Is factory inspection required for BIS certification?

Factory assessment is an important part of the applicable BIS certification process.

10. How much does BIS certification for AC motor capacitors cost?

The cost depends on product variants, testing requirements, laboratory charges, factory inspection and documentation requirements.

11. How long does BIS certification take?

The timeline depends on testing duration, documentation, laboratory availability, factory readiness and BIS assessment.

12. Can multiple capacitor models be included in one BIS licence?

Multiple models may be covered subject to the applicable product grouping and BIS scope requirements.

13. What is product grouping in BIS certification?

Product grouping determines how different product variants can be represented within the certification scope and which samples need to be tested.

14. What is a self-healing capacitor?

A self-healing capacitor is designed so that a localized dielectric breakdown can clear the affected area under specified conditions.

15. What is a motor start capacitor?

A motor start capacitor is a capacitor specifically intended to provide the starting characteristics required by applicable AC motor applications.

16. What is a motor run capacitor?

A motor run capacitor is generally designed for continuous operation in an applicable motor circuit.

17. What is the BIS Standard Mark?

The BIS Standard Mark is the mark used by a licensed manufacturer according to the applicable BIS certification conditions.

18. Can foreign manufacturers obtain BIS certification?

Eligible foreign manufacturers can apply under the applicable BIS foreign manufacturer certification framework.

19. What happens if the product fails BIS testing?

The manufacturer may need to investigate the failure, implement corrective action and undertake applicable re-testing according to BIS requirements.

20. Is testing required before BIS application?

Product testing is a major component of the BIS certification process, and the applicable testing route should be determined before application.

21. What is BIS factory inspection?

It is an assessment of the manufacturer's production facilities, quality-control system, testing arrangements and compliance with applicable requirements.

22. What is ISI Mark certification?

ISI Mark certification refers to BIS certification under which licensed manufacturers can mark products with the applicable Standard Mark according to BIS requirements.

23. What happened to the older IS 2993 standard?

IS 2993 was revised, and the current framework includes Part 1:2024 and Part 2:2024.

24. Can Qualitance India help with IS 2993 certification?

Yes. Qualitance India provides consultancy support covering product assessment, documentation, testing coordination, BIS application and factory inspection preparation.

25. How can I start BIS certification for A.C. Motor Capacitors?

Start by sharing your product specifications, capacitance range, rated voltage, product catalogue and manufacturing details. The applicable IS 2993 scope and certification requirements can then be assessed.

FAQ Schema Content

Website par FAQPage Schema use kiya ja sakta hai, lekin schema ke answers exactly wahi hone chahiye jo users ko visible FAQ section mein dikh rahe hain.

Service Schema Suggestion

Service Name: BIS Certification Consultancy for A.C. Motor Capacitors

Service Type: BIS Certification Consultancy

Applicable Standard: IS 2993

Provider: Qualitance India

Area Served: India

Description: Professional BIS Certification Consultancy for A.C. Motor Capacitors, including applicability assessment, documentation, product testing coordination, BIS application support and factory inspection preparation.

Organization Schema Suggestion

Organization Name: Qualitance India

Tagline: Improving Quality and Competence

Phone: +91-9310-615-170

Email: info@qualitanceindia.com

Website: qualitanceindia.com

Breadcrumb Schema Suggestion

Home → BIS Certification → Electrical Products → Capacitor BIS Certification → A.C. Motor Capacitors – IS 2993

Article Schema Suggestion

Article Type: Article / BlogPosting

Headline: BIS Certification for A.C. Motor Capacitors – IS 2993

Author: Qualitance India

Publisher: Qualitance India

Article Section: BIS Certification

Keywords: BIS Certification for A.C. Motor Capacitors, IS 2993, AC Motor Capacitor BIS Certification, BIS Licence for Capacitors

Internal Linking Strategy

Is blog se website ke relevant pages par internal links add karein:

BIS Certification Consultancy
BIS Certification Process
BIS Certification Cost
BIS Certification Documents
BIS Product Testing
BIS Factory Inspection
BIS ISI Mark Certification
Electrical Product BIS Certification
BIS Certification for Electrical Products
Foreign Manufacturer BIS Certification
BIS Testing Services
QCO Compliance Consultancy

Recommended Anchor Text

BIS Certification Process

BIS Certification Cost

BIS Testing Services

BIS Factory Inspection

ISI Mark Certification

Electrical Product BIS Certification

BIS Certification Documents

External Authority References

SEO ke liye external links mein primarily official sources ko preference dein:

Bureau of Indian Standards
BIS Product Certification
BIS Compulsory Certification List
BIS Product Manuals
BIS Standards Database
BIS Laboratory Information Management System

External references ke liye third-party blogs ke bajay official BIS sources ko priority dena better rahega.

Related BIS Services

BIS Certification for Electrical Products
BIS Certification for Capacitors
BIS Certification for Motor Start Capacitors
BIS ISI Mark Certification
BIS Product Testing
BIS Factory Inspection Assistance
BIS Documentation Support
BIS Application Assistance
BIS Testing Coordination
Foreign Manufacturer BIS Certification
BIS QCO Compliance Consultancy

Related Blog Suggestions

IS 2993 Part 1:2024 BIS Certification Guide
IS 2993 Part 2:2024 BIS Certification Guide
Motor Start Capacitor BIS Certification
AC Motor Capacitor Testing Requirements
BIS Certification Cost for Capacitors
Documents Required for IS 2993 Certification
BIS Factory Inspection for Capacitor Manufacturers
AC Capacitor ISI Mark Certification
BIS Certification Process for Electrical Products
Difference Between Motor Start and Motor Run Capacitors
Self-Healing Capacitor Testing
Capacitor Endurance Testing
BIS Certification for Electrical Components
Common Reasons for BIS Application Rejection
BIS Product Grouping Explained
BIS Testing Laboratory for Capacitors
BIS Certification for Electrical Manufacturers
ISI Mark Certification Process in India
BIS Certification for Indian Manufacturers
BIS Certification for Foreign Manufacturers

Strong Lead Generation CTA

Need BIS Certification for A.C. Motor Capacitors?

Are you an A.C. Motor Capacitor Manufacturer, Motor Start Capacitor Manufacturer, Electrical Component Manufacturer or OEM Supplier?

Get professional assistance for your IS 2993 BIS Certification.

Qualitance India can assist you with:

✓ BIS Applicability Assessment
✓ IS 2993 Scope Assessment
✓ Product Grouping
✓ Technical Documentation
✓ Laboratory Coordination
✓ Product Testing Support
✓ BIS Application Assistance
✓ Factory Inspection Preparation
✓ Quality-Control Documentation
✓ Technical Observation Support
✓ ISI Mark Compliance
✓ End-to-End BIS Certification Consultancy

Contact Qualitance India

Call / WhatsApp: +91-9310-615-170
Email: info@qualitanceindia.com
Website: qualitanceindia.com

Qualitance India – Improving Quality and Competence

SEO-Optimized Conclusion

BIS Certification for A.C. Motor Capacitors as per IS 2993 is an important compliance requirement for manufacturers of covered products. With the revision of the standard into IS 2993 Part 1:2024 and IS 2993 Part 2:2024, manufacturers should carefully review their product scope and applicable requirements before proceeding with certification.

The BIS certification process involves product assessment, applicable testing, documentation, product grouping, factory readiness, application submission, inspection and ongoing compliance.

Manufacturers should also ensure that product specifications, technical documents, testing facilities, calibration records and quality-control systems are properly prepared before the BIS application.

If you are looking for professional assistance with IS 2993 BIS Certification, product testing, documentation, laboratory coordination or factory inspection preparation, Qualitance India can provide end-to-end consultancy support.

Contact Qualitance India today for A.C. Motor Capacitor BIS Certification assistance.