BIS Certification for Electric Ceiling Type Fans – IS 374:2019 | BIS Licence for Ceiling Fans

Introduction

BIS Certification for Electric Ceiling Type Fans is a mandatory conformity requirement for covered electric ceiling fans under IS 374:2019 – Electric Ceiling Type Fans. BIS currently lists IS 374:2019 under compulsory certification through the Electric Ceiling Type Fans (Quality Control) Order, 2023, with an amendment to the QCO listed as S.O. 777(E), dated 13 February 2026.

IS 374:2019 is the third revision of the Indian Standard for electric ceiling type fans and covers important requirements relating to construction, safety, air performance, speed, power input, endurance and other performance characteristics. The BIS Product Manual states that the standard covers ceiling fans driven by squirrel cage induction motors (capacitor type) or brushless DC motors, with or without speed regulators or remote-control devices.

The standard provides requirements for fan sizes, electrical safety, air delivery, performance and testing. BIS laboratory records also show testing against requirements such as air performance, fan speed, power factor and power input, endurance, harmonic distortion, electrical safety and other applicable tests.

For manufacturers and businesses dealing with covered ceiling fans, obtaining the applicable BIS licence and maintaining compliance with IS 374:2019 and the current QCO requirements is important for lawful market supply.

About the Product

Electric Ceiling Type Fans are electrically powered ceiling-mounted fans designed to circulate air within residential, commercial and similar spaces.

Under IS 374:2019, the product scope includes ceiling fans driven by:

Squirrel cage induction motor
Capacitor-type induction motor
Brushless DC motor (BLDC)

The Product Manual also allows the licence scope to include fans:

With speed regulators
Without speed regulators
With remote-control devices
Without remote-control devices

The BIS Product Manual identifies the licence scope in terms of fan size, voltage, frequency, insulation class, motor type and control accessories.

What is BIS Certification?

BIS Certification is a conformity-assessment system administered by the Bureau of Indian Standards (BIS).

For products covered under compulsory certification, manufacturers are required to demonstrate conformity with the applicable Indian Standard and comply with the relevant BIS certification requirements before using the Standard Mark in accordance with their licence.

Electric Ceiling Type Fans under IS 374:2019 are currently included in BIS's compulsory-certification framework.

The certification process generally involves:

Product applicability assessment
Documentation
Product testing
Sample evaluation
Factory assessment
Quality-control verification
BIS application
Technical scrutiny
Grant of licence
Ongoing compliance and surveillance

What is IS 374:2019?

IS 374:2019 is titled:

Electric Ceiling Type Fans

It is the third revision of the standard.

The standard establishes requirements relating to:

Construction
Electrical safety
Fan performance
Air delivery
Fan speed
Power input
Power factor
Endurance
Speed regulators
Harmonic distortion
Mechanical and electrical safety
Marking

BIS's Product Manual identifies the standard as IS 374:2019 – Electric Ceiling Type Fans and states that certification is operated under Scheme-I.

Scope of IS 374:2019

IS 374:2019 covers electric ceiling type fans with applicable characteristics specified by the standard.

The BIS Product Manual describes the licence scope as including:

Electric ceiling type fans driven by squirrel cage induction motor (capacitor type) / Brushless DC motor fans, with or without Speed Regulators / Remote Control Device, for fan sizes in the applicable range, rated voltage, 50 Hz and applicable insulation class.

The standard information published by BIS describes fan sizes from 600 mm to 1500 mm, with requirements covering materials, blade balance, motor enclosures, air performance and electrical safety.

Products Covered

Depending on the applicable product scope, BIS certification can cover:

Electric ceiling fans
Conventional ceiling fans
Capacitor-type induction motor ceiling fans
BLDC ceiling fans
Ceiling fans with speed regulators
Ceiling fans without speed regulators
Ceiling fans with remote controls
Ceiling fans without remote controls
Residential ceiling fans
Commercial-use ceiling fans within the standard scope
Different fan sizes covered by the licence
Different rated voltage configurations
Different insulation classes

The exact licence scope should be finalized according to the applicable BIS Product Manual and current requirements.

Fan Sizes Covered

The BIS standard information indicates a size range of:

600 mm to 1500 mm

The exact sizes included in a manufacturer's BIS licence depend on the proposed product range and applicable product-grouping provisions.

Common fan sizes may include:

600 mm
900 mm
1050 mm
1200 mm
1400 mm
1500 mm

The manufacturer should verify the exact proposed sizes against the current BIS requirements before submitting the application.

Motor Types Covered

1. Squirrel Cage Induction Motor

Traditional capacitor-type induction motor ceiling fans fall within the standard's scope.

2. Brushless DC Motor – BLDC

IS 374:2019 also includes ceiling fans powered by Brushless DC motors.

The inclusion of BLDC technology is one of the important features of the revised standard.

Speed Regulators

Ceiling fans may be supplied with or without speed regulators within the applicable licence scope.

The standard includes requirements relating to:

Speed control
Reduction in speed
Multiple speed positions
Regulator performance
Regulator endurance

BIS testing records specifically include testing of speed regulators and mechanical endurance for regulators.

Remote Control Device

Fans may also be provided with a remote-control device where applicable.

The BIS Product Manual identifies remote-control devices as a scope parameter and refers to applicable requirements for such devices.

Enforcement / Mandatory Certification Status

Electric Ceiling Type Fans are currently under compulsory BIS certification.

BIS's current Scheme-I list identifies:

IS 374:2019 – Electric Ceiling Type Fans

under:

Electric Ceiling Type Fans (Quality Control) Order, 2023 – S.O. 3641(E), dated 9 August 2023

The BIS list also records an amendment to the QCO:

S.O. 777(E), dated 13 February 2026.

Important Website Note

Because QCOs can be amended from time to time, manufacturers should verify the latest notification and applicability before relying on a historical implementation date.

Applicable QCO Details

Particular	Details
Product	Electric Ceiling Type Fans
Indian Standard	IS 374:2019
Standard Title	Electric Ceiling Type Fans
Certification	Mandatory
Certification Scheme	Scheme-I
QCO	Electric Ceiling Type Fans (Quality Control) Order, 2023
Original QCO Notification	S.O. 3641(E), 9 August 2023
2026 Amendment	S.O. 777(E), 13 February 2026
BIS Mark	Standard Mark / ISI Mark as applicable
Product Types	Induction Motor / BLDC Fans
Fan Size Range	600 mm–1500 mm, subject to applicable scope
Testing	Mandatory as applicable
Factory Assessment	Applicable

BIS's compulsory-certification list is the primary source for the current QCO linkage.

Who Needs BIS Certification?

BIS certification can be applicable to manufacturers producing covered electric ceiling type fans.

This can include:

Ceiling fan manufacturers
Electric fan manufacturers
BLDC fan manufacturers
Domestic fan manufacturers
Commercial fan manufacturers within scope
OEM fan manufacturers
Private-label manufacturers
Electrical appliance manufacturers producing covered fans
Eligible foreign manufacturers

Importers and sellers should also ensure that the products they place on the Indian market are covered by the required certification and QCO provisions.

Eligibility Criteria

A manufacturer should have appropriate:

Manufacturing Facilities

Motor assembly facilities
Stator/rotor assembly facilities
Blade manufacturing/assembly facilities
Fan housing facilities
Wiring facilities
Electrical assembly
Final assembly
Finishing and packing facilities

Quality-Control Facilities

Incoming material inspection
In-process inspection
Finished-product inspection
Electrical testing
Performance testing arrangements
Calibration system
Quality records

Documentation

Manufacturing process
Product specifications
Drawings
Component details
Test records
Quality-control plan
Marking information
Factory records

Complete BIS Certification Process

Step 1 – Product Applicability Assessment

Determine whether the fan falls under IS 374:2019.

Step 2 – Product Specification Review

Identify:

Motor type
Fan size
Rated voltage
Frequency
Insulation class
Speed regulator
Remote-control device

Step 3 – Product Grouping

Determine the applicable grouping of fan variants.

Step 4 – Factory Readiness

Evaluate manufacturing, testing and quality-control arrangements.

Step 5 – Documentation

Prepare the required BIS application and technical documents.

Step 6 – Sample Preparation

Prepare representative samples according to applicable BIS requirements.

The Product Manual specifies a sample size of 3 units for the product.

Step 7 – Product Testing

Conduct applicable tests through the appropriate testing arrangement/laboratory.

Step 8 – BIS Application

Submit the BIS application with supporting documents.

Step 9 – Application Scrutiny

BIS reviews the submitted information.

Step 10 – Factory Inspection

BIS evaluates the manufacturing and quality-control arrangements.

Step 11 – Sample/Test Verification

Test results and applicable samples are reviewed.

Step 12 – Observation Closure

Address BIS technical or documentation observations.

Step 13 – Licence Grant

After satisfying applicable requirements, BIS may grant the licence.

Step 14 – Standard Mark Compliance

The manufacturer uses the Standard Mark according to the licence conditions.

Step 15 – Ongoing Compliance

Maintain production testing, quality records and surveillance requirements.

Required Documents

Common documents can include:

Company registration documents
Factory registration documents
Factory address proof
Factory layout
Manufacturing process flow chart
Machinery list
Testing equipment list
Calibration certificates
Product specifications
Product drawings
Technical datasheets
Motor specifications
Blade specifications
Regulator specifications
Remote-control specifications
Raw-material details
Component details
Supplier information
Quality-control plan
Internal test reports
Finished-product test records
Marking details
Packaging details
Trademark documents
Authorized signatory documents
BIS application documents
Applicable declarations/undertakings

The exact documentation should be finalized according to the current BIS application requirements.

Testing Requirements

Testing is a major part of BIS Certification for Electric Ceiling Type Fans.

BIS laboratory records for IS 374:2019 show testing across electrical safety, performance and endurance requirements.

Important testing areas include:

1. Design and General Construction

The fan is assessed for applicable construction requirements.

2. Electrical Safety

Testing can include:

Protection against electric shock
Electrical insulation
Leakage current
High-voltage/electric-strength testing
Earthing
Creepage distances
Clearances
Insulation systems

BIS laboratory scopes for IS 374:2019 include these electrical safety requirements.

3. Temperature Rise

The temperature rise of relevant components is evaluated under applicable operating conditions.

4. Air Delivery Test

Air performance is an important characteristic of ceiling fans.

BIS laboratory listings specifically identify air performance testing for IS 374:2019.

5. Fan Speed

The actual speed of the fan is measured according to the standard.

6. Power Input

Power consumption/input is evaluated.

7. Power Factor

Power factor is measured for applicable fan configurations.

8. Endurance Test

Fans and applicable regulators are subjected to endurance requirements.

9. Speed Regulator Testing

Where a regulator is supplied, applicable requirements are tested.

10. Harmonic Distortion

For applicable BLDC/electronic fan configurations, harmonic distortion requirements are evaluated.

BIS laboratory records specifically list harmonic distortion testing under IS 374:2019.

11. Mechanical Strength

Relevant mechanical safety and strength requirements are evaluated.

12. Resistance to Heat and Fire

Applicable materials/components may be evaluated for resistance to heat and fire.

13. Resistance to Rusting

Applicable components are assessed against corrosion/rusting requirements.

14. Marking

The fan's required markings are checked.

Important Performance Requirements

IS 374:2019 focuses on important performance characteristics such as:

Air delivery
Service value
Fan speed
Power input
Power factor
Starting
Silent operation
Endurance
Harmonic distortion where applicable

BIS's laboratory testing records specifically list air performance, speed, power factor/power input, endurance and harmonic distortion tests.

Safety Requirements

Safety is an important part of BIS certification for ceiling fans.

Applicable requirements can include:

Protection against electric shock
Electrical insulation
Moisture resistance
Electric strength
Fault-condition safety
Earthing
Creepage distances
Clearances
Screws and connections
Resistance to heat and fire
Resistance to rusting

BIS laboratory records for IS 374:2019 include these types of safety tests under the applicable test clauses.

Product Grouping

Product grouping is important when a manufacturer produces multiple ceiling fan variants.

The BIS Product Manual provides grouping guidance in Annex A.

A manufacturer may have variations in:

Fan size
Motor type
Voltage
Insulation class
Speed regulator
Remote-control device
Product construction

The proposed licence scope should be prepared carefully so that representative products and variants are covered appropriately.

Sample Requirements

The BIS Product Manual specifies:

Sample Size: 3 Nos.

for IS 374:2019 certification.

The actual sample selection and testing should follow the current BIS Product Manual, grouping guidelines and instructions applicable to the certification application.

Factory Inspection Process

During BIS factory inspection, the manufacturer should be prepared to demonstrate:

Raw Material Control

Electrical components
Motor components
Capacitors
Wiring
Insulation materials
Blades
Housing materials
Regulators
Remote-control components

Manufacturing Control

Motor assembly
Winding/assembly
Rotor/stator assembly
Blade assembly
Electrical wiring
Fan balancing
Final assembly
Inspection
Packing

Quality Control

Incoming inspection
In-process inspection
Final inspection
Electrical testing
Performance testing
Rejection control
Corrective action
Calibration

Testing Arrangement

The manufacturer should have the required testing equipment or an acceptable testing arrangement according to BIS requirements.

The Product Manual provides a dedicated list of test equipment under Annex B.

Common Reasons for BIS Certification Application Rejection

Common compliance issues can include:

Incorrect standard selection
Incorrect product scope
Incomplete product grouping
Incorrect fan size declaration
Motor specification mismatch
Failed air-delivery test
Failed power-input test
Failed power-factor test
Failed endurance test
Failed electrical safety test
Failed insulation test
Failed high-voltage test
Failed earthing test
Failed temperature-rise test
Failed regulator test
Harmonic-distortion non-compliance
Inadequate testing equipment
Calibration problems
Incomplete manufacturing records
Incomplete technical documents
Incorrect marking
Factory inspection observations
Failure to close BIS observations
Non-compliance with current QCO requirements

BIS Certification Cost for Electric Ceiling Fans

There is no single fixed BIS certification cost for every ceiling fan manufacturer.

The total cost can depend on:

Number of fan models
Number of sizes
Motor type
BLDC or induction motor
Number of variants
Speed regulator
Remote-control device
Product grouping
Laboratory testing charges
BIS application charges
Inspection expenses
Testing equipment
Calibration
Consultancy
Re-testing, if required

BIS LIMS currently shows different laboratories with different testing charges for IS 374:2019. For example, current listings show complete/partial testing packages at different rates depending on laboratory scope and exclusions.

Therefore, the actual project cost should be calculated after reviewing the manufacturer's exact product range.

BIS Certification Timeline

The timeline can vary depending on:

Product complexity
Number of models
Sample readiness
Laboratory availability
Test results
Documentation
Factory readiness
BIS scrutiny
Inspection scheduling
Technical observations
Re-testing

A manufacturer can reduce unnecessary delays by preparing technical documents, testing arrangements and factory quality-control systems before submitting the application.

Benefits of BIS Certification

1. Regulatory Compliance

Helps manufacturers comply with mandatory BIS requirements applicable to covered ceiling fans.

2. Product Safety

Certification supports compliance with applicable electrical and mechanical safety requirements.

3. Quality Assurance

Testing and quality-control requirements encourage consistent manufacturing quality.

4. Customer Confidence

BIS certification can strengthen buyer confidence in the product.

5. Market Acceptance

Compliance supports lawful supply of covered products in the Indian market.

6. Brand Credibility

The applicable Standard Mark can improve product credibility when used according to BIS licence conditions.

7. Better Manufacturing Control

The certification process encourages systematic control of:

Raw materials
Production
Testing
Inspection
Traceability
Finished products

Why Choose Qualitance India?

Qualitance India provides professional BIS Certification Consultancy for electric ceiling fan manufacturers.

Our Consultancy Services Include:

✓ IS 374:2019 Applicability Assessment ✓ Product Scope Assessment ✓ Product Grouping Guidance ✓ BLDC Fan Certification Guidance ✓ Conventional Fan Certification Guidance ✓ BIS Documentation Support ✓ Testing Coordination ✓ Laboratory Coordination ✓ Sample Preparation Guidance ✓ BIS Application Assistance ✓ Factory Inspection Preparation ✓ Quality-Control Documentation ✓ Technical Query Assistance ✓ ISI Mark Compliance Guidance ✓ End-to-End BIS Certification Support

Contact Qualitance India

Phone: +91-9310-615-170 Email: info@qualitanceindia.com Website: https://qualitanceindia.com/

Qualitance India – Improving Quality and Competence

Step-by-Step BIS Certification Flow Chart

Product Identification ↓ IS 374:2019 Applicability Check ↓ Motor Type Identification ↓ Fan Size Identification ↓ Voltage & Frequency Assessment ↓ Regulator / Remote-Control Assessment ↓ Product Grouping ↓ Factory Readiness Assessment ↓ Documentation Preparation ↓ Sample Selection ↓ Product Testing ↓ BIS Application Submission ↓ Application Scrutiny ↓ Factory Inspection ↓ Technical Observation Closure ↓ BIS Licence Grant ↓ ISI/Standard Mark Compliance ↓ Regular Testing & Surveillance

25 SEO FAQs

1. Is BIS Certification mandatory for electric ceiling fans?

Yes. BIS currently lists IS 374:2019 – Electric Ceiling Type Fans under compulsory certification through the Electric Ceiling Type Fans Quality Control Order.

2. What is IS 374:2019?

IS 374:2019 is the Indian Standard for Electric Ceiling Type Fans.

3. What types of motors are covered under IS 374:2019?

The BIS Product Manual covers ceiling fans driven by squirrel cage induction motors (capacitor type) and brushless DC motors.

4. Are BLDC ceiling fans covered by BIS?

Yes. BLDC ceiling fans are included within the applicable scope of IS 374:2019.

5. Are speed regulators covered?

Yes. Fans can be covered with or without speed regulators, subject to the applicable licence scope.

6. Are remote-controlled ceiling fans covered?

Yes. The BIS Product Manual includes remote-control devices as an applicable scope parameter.

7. What fan sizes are covered?

The standard information published by BIS indicates fan sizes from 600 mm to 1500 mm.

8. What is the sample size for IS 374:2019?

The BIS Product Manual specifies 3 units as the product sample size.

9. What tests are required for ceiling fans?

Testing can include air performance, fan speed, power input, power factor, endurance, electrical safety, temperature rise, insulation, earthing, mechanical strength and other applicable requirements.

10. Is air delivery testing required?

Yes. Air performance/air delivery is an important performance test under IS 374:2019.

11. Is endurance testing required?

Yes. Endurance testing is included in the BIS testing framework for IS 374:2019.

12. Is harmonic distortion testing required?

Harmonic distortion testing is included in the applicable BIS testing scope, particularly relevant to electronic/BLDC fan configurations.

13. Is factory inspection required?

Factory assessment is part of the applicable BIS certification process.

14. What documents are required for BIS certification of ceiling fans?

Documents can include factory details, product specifications, drawings, manufacturing process, machinery details, testing equipment, calibration records, quality-control documents and marking information.

15. What is the BIS certification cost for ceiling fans?

The cost depends on the number of models, sizes, motor types, tests, laboratory charges, inspection and other applicable expenses.

16. How long does BIS certification take?

The timeline depends on testing, documentation, factory readiness, laboratory availability, BIS scrutiny and inspection scheduling.

17. Can a manufacturer get BIS certification for multiple fan sizes?

Yes, multiple sizes can potentially be included subject to the applicable product grouping and BIS licence scope.

18. Can both BLDC and induction motor fans be covered?

The standard covers both motor types, but the exact licence scope and grouping should be assessed for the manufacturer's products.

19. What is the BIS Mark for ceiling fans?

The applicable Standard Mark/ISI Mark can be used according to the BIS licence and marking requirements.

20. What QCO applies to electric ceiling fans?

The Electric Ceiling Type Fans (Quality Control) Order, 2023 applies, and BIS's current listing also records a 2026 amendment to the QCO.

21. What is S.O. 777(E) for ceiling fans?

S.O. 777(E), dated 13 February 2026, is listed by BIS as an amendment to the Electric Ceiling Type Fans Quality Control Order, 2023.

22. Can foreign manufacturers obtain BIS certification?

Eligible foreign manufacturers can apply under the applicable BIS foreign-manufacturer certification route, subject to the relevant BIS requirements.

23. Is testing available for IS 374:2019?

Yes. BIS LIMS lists laboratories and testing scopes for IS 374:2019.

24. Is BIS certification required before selling covered ceiling fans in India?

Manufacturers and other regulated parties should comply with the applicable mandatory BIS certification and QCO requirements before placing covered products on the Indian market.

25. How can I get BIS Certification for Electric Ceiling Fans?

You should first confirm applicability, identify the fan's motor type, size and accessories, prepare product grouping and documents, complete required testing, submit the BIS application, undergo factory assessment and satisfy applicable BIS requirements.

FAQ Schema Content

Recommended Schema: FAQPage

Use the 25 FAQs above as visible FAQ content and create matching FAQ structured data.

The FAQ structured-data answers should exactly reflect the visible answers on the webpage.

Service Schema Suggestion

Schema Type: Service

Service Name: BIS Certification Consultancy for Electric Ceiling Type Fans

Service Type: BIS Certification Consultancy

Standard: IS 374:2019

Provider: Qualitance India

Area Served: India

Description: BIS certification consultancy for electric ceiling type fan manufacturers as per IS 374:2019, including product scope assessment, product grouping, documentation, testing coordination, BIS application and factory inspection support.

Organization Schema Suggestion

Schema Type: Organization

Organization Name: Qualitance India

Tagline: Improving Quality and Competence

Telephone: +91-9310-615-170

Email: info@qualitanceindia.com

Website: https://qualitanceindia.com/

Breadcrumb Schema Suggestion

Home → BIS Certification → Electrical Products BIS Certification → Electric Ceiling Fan Certification → IS 374:2019

Article Schema Suggestion

Schema Type: Article / BlogPosting

Headline: BIS Certification for Electric Ceiling Type Fans – IS 374:2019

Author: Qualitance India

Publisher: Qualitance India

Article Section: BIS Certification / Electrical Products

Keywords: BIS Certification for Electric Ceiling Type Fans, IS 374:2019, Ceiling Fan BIS Certification, Ceiling Fan ISI Mark

Internal Linking Strategy

Is blog ko website ke relevant BIS service pages ke saath internally link karein.

Recommended Anchor Text

BIS Certification Process
BIS Certification Cost
BIS Certification Documents
BIS Product Testing
BIS Factory Inspection
Electrical Product BIS Certification
Ceiling Fan BIS Certification
BLDC Fan BIS Certification
BIS QCO Compliance
ISI Mark Certification

External Authority References – BIS/QCO

Website E-E-A-T improve karne ke liye official BIS sources ko primary external references rakhein:

BIS Scheme-I / Compulsory Certification List
BIS IS 374:2019 Product Information
BIS Product Manual for IS 374:2019
Electric Ceiling Type Fans Quality Control Order, 2023
2026 Amendment to Electric Ceiling Type Fans QCO
BIS LIMS Testing Scope
Applicable Scheme of Inspection and Testing

BIS's current compulsory-certification list is particularly important because it now records the 2026 QCO amendment as well.

Related BIS Services

BIS Certification for Electric Ceiling Fans
BIS Certification for BLDC Fans
BIS Certification for Electrical Appliances
BIS ISI Mark Certification
BIS Product Testing
BIS Factory Inspection Assistance
BIS Documentation Support
BIS Application Assistance
BIS QCO Compliance
BIS Testing Coordination
Foreign Manufacturer BIS Certification
Electrical Product Certification Consultancy

Related Blog Suggestions

BIS Certification for Electric Ceiling Fans – Complete Guide
IS 374:2019 – Complete BIS Certification Guide
BIS Certification Process for Ceiling Fans
BIS Certification Cost for Electric Ceiling Fans
Documents Required for Ceiling Fan BIS Certification
IS 374:2019 Testing Requirements
BIS Testing for Electric Ceiling Fans
Ceiling Fan Product Grouping Under BIS
BIS Factory Inspection for Fan Manufacturers
BLDC Fan BIS Certification in India
Difference Between BLDC and Conventional Ceiling Fan Certification
Ceiling Fan Air Delivery Testing
Ceiling Fan Endurance Testing
Ceiling Fan Power Consumption Testing
Ceiling Fan Power Factor Testing
Ceiling Fan Harmonic Distortion Testing
Ceiling Fan Electrical Safety Testing
Ceiling Fan ISI Mark Requirements
Electric Fan QCO 2023 Explained
Electric Ceiling Fan QCO Amendment 2026
BIS Certification for Fan Regulators
BIS Certification for Remote-Controlled Ceiling Fans
Common Reasons for Ceiling Fan BIS Rejection
How to Prepare Ceiling Fan Factory for BIS Inspection
BIS Certification Guide for Electrical Product Manufacturers

Strong Lead Generation CTA

Need BIS Certification for Electric Ceiling Fans?

Are you a Ceiling Fan Manufacturer, BLDC Fan Manufacturer, Electrical Appliance Manufacturer or OEM Fan Manufacturer looking for BIS certification support?

Qualitance India can assist you with:

✓ IS 374:2019 Applicability Assessment ✓ Product Scope Assessment ✓ Fan Size & Motor Type Assessment ✓ Product Grouping ✓ BLDC Fan Certification Guidance ✓ BIS Documentation ✓ Testing Coordination ✓ Laboratory Coordination ✓ Sample Preparation ✓ BIS Application Assistance ✓ Factory Inspection Preparation ✓ Quality-Control Documentation ✓ Technical Query Support ✓ ISI Mark Compliance ✓ End-to-End BIS Certification Consultancy

Get Expert BIS Certification Support

Call / WhatsApp: +91-9310-615-170 Email: info@qualitanceindia.com Website: https://qualitanceindia.com/

Qualitance India – Improving Quality and Competence

SEO-Optimized Conclusion

BIS Certification for Electric Ceiling Type Fans is a mandatory compliance requirement for covered products under IS 374:2019. BIS currently lists IS 374:2019 under compulsory certification through the Electric Ceiling Type Fans (Quality Control) Order, 2023, with a further amendment listed on 13 February 2026.

IS 374:2019 covers important requirements for electric ceiling fans, including construction, electrical safety, air performance, fan speed, power input, power factor, endurance and other applicable performance characteristics. The standard also covers ceiling fans using capacitor-type induction motors and BLDC motors.

The BIS certification process involves product applicability assessment, product grouping, documentation, sample testing, BIS application, factory inspection and continuing compliance.

For manufacturers planning to obtain or maintain BIS certification, proper preparation of technical documentation, product samples, testing arrangements and factory quality-control systems can significantly reduce avoidable delays.

Qualitance India provides end-to-end BIS Certification Consultancy for electric ceiling fan manufacturers, including documentation support, testing coordination, product grouping, BIS application assistance, factory inspection preparation and ISI Mark compliance guidance.