BIS Certification for Plastic Feeding Bottles

BIS Certification for Plastic Feeding Bottles | IS 14625:2015 | BIS License Consultancy

Introduction

Plastic Feeding Bottles are specially designed containers used for feeding infants with milk and other suitable liquids. Because these products come into direct contact with food and are intended for infants, their material quality, safety, hygiene, durability and performance are extremely important. In India, Plastic Feeding Bottles are covered under Indian Standard IS 14625:2015 – Plastics Feeding Bottles (First Revision). BIS lists IS 14625:2015 under its mandatory BIS certification requirements for Plastic Feeding Bottles under the Infant Milk Substitutes, Feeding Bottles and Infant Foods (Regulation of Production, Supply and Distribution) Act, 1992. Manufacturers and businesses dealing with Plastic Feeding Bottles should therefore understand the applicable BIS certification, product testing, documentation, manufacturing facilities and BIS licence requirements before supplying the product in the Indian market.

What is IS 14625:2015?

IS 14625:2015 is the Indian Standard for Plastics Feeding Bottles. The BIS Product Manual for IS 14625:2015 provides certification guidance for manufacturers and prospective applicants under Scheme-I of the BIS Conformity Assessment Regulations. The standard addresses important aspects of plastic feeding bottles, including requirements related to:

Material
Design and dimensions
Manufacturing and workmanship
Wall thickness
Capacity
Transparency
Leakage resistance
Drop resistance
Ageing resistance
Compressive deformation resistance
Migration and chemical safety
Printing and marking
Packing and marking

These requirements are intended to ensure that feeding bottles manufactured and supplied in India meet the applicable quality and safety requirements.

Is BIS Certification Mandatory for Plastic Feeding Bottles?

Yes. BIS specifically lists IS 14625 – Plastic Feeding Bottles under the products subject to mandatory BIS certification. The applicable regulatory reference is the Infant Milk Substitutes, Feeding Bottles and Infant Foods (Regulation of Production, Supply and Distribution) Act, 1992. Therefore, manufacturers of products covered by the applicable scope of IS 14625 need to obtain the required BIS licence and comply with the relevant certification requirements.

Scope of IS 14625:2015

IS 14625:2015 covers Plastic Feeding Bottles manufactured using specified plastic materials. The BIS product manual identifies materials such as Polypropylene (PP), Polyethersulfone (PES) and other applicable materials covered by the standard. The manufacturer has to declare the type of material proposed to be included in the licence scope. The product manual also requires manufacturers to submit drawings of the sizes of Plastic Feeding Bottles and declare the minimum wall thickness for the sizes proposed to be covered under the licence.

Key Requirements for Plastic Feeding Bottles

1. Material Requirements

The material used for manufacturing the feeding bottle must meet the applicable requirements of IS 14625. Material identification and chemical-safety requirements are important because the bottle comes into contact with milk or other feeding liquids.

2. Design, Shape and Dimensions

The bottle must comply with the applicable requirements for design, shape, dimensions and construction. Manufacturers should maintain appropriate product drawings and specifications for the bottle sizes proposed for BIS certification.

3. Wall Thickness and Capacity

The standard includes requirements relating to wall thickness and bottle capacity. BIS laboratory testing information for IS 14625 includes testing for wall thickness and capacity among the applicable test requirements.

4. Leakage Resistance

Feeding bottles must demonstrate appropriate resistance against leakage. Leakage testing is specifically identified in the current BIS laboratory information for IS 14625.

5. Drop Test

The product needs to meet the applicable requirements for resistance to dropping. This is important because feeding bottles may be accidentally dropped during normal handling and use.

6. Ageing Resistance

The standard includes requirements for ageing resistance. BIS laboratory information identifies ageing-resistance testing for IS 14625.

7. Compressive Deformation Resistance

Plastic feeding bottles are also evaluated for resistance to compressive deformation according to the applicable requirements.

8. Chemical and Migration Requirements

Since the bottle is intended to come into contact with feeding substances, chemical safety is a major part of the standard. Current BIS laboratory information for IS 14625 includes tests relating to migration of specified elements and specific migration requirements.

9. Printing and Marking

Where printing is provided on the container, the applicable requirements relating to the resistance of printed containers must be fulfilled. BIS laboratory information identifies testing for product resistance of printed containers under IS 14625.

BIS Testing Requirements for Plastic Feeding Bottles

Testing is one of the most important stages of BIS certification. The current BIS LIMS information for IS 14625:2015 – Plastics Feeding Bottles (First Revision) identifies several testing areas, including:

Physical requirements
Wall thickness
Capacity
Transparency
Leakage test
Drop test
Ageing resistance
Compressive deformation resistance
Resistance of printed containers
Material identification
Migration testing
Migration of specified elements
Specific migration
Packing and marking

The exact testing programme depends on the applicable product configuration, material, scope and requirements of the current standard.

BIS Product Grouping for IS 14625

Product grouping is an important part of the BIS licensing process for Plastic Feeding Bottles. According to the BIS product manual, the manufacturer must declare the type of material intended to be covered in the scope of the licence. A sample of each type of material is required to be tested for consideration of grant of licence or inclusion of that material/type in the licence scope. The manufacturer also needs to provide drawings covering the relevant bottle sizes and declare the minimum wall thickness for the sizes proposed for inclusion. This makes correct product grouping and scope planning particularly important for manufacturers with multiple bottle materials, designs or sizes.

BIS Certification Process for Plastic Feeding Bottles

The BIS certification process generally involves the following stages:

Step 1 – BIS Applicability Assessment

First, the manufacturer should determine whether the product falls within the applicable scope of IS 14625:2015. The product material, design, size and intended application should be reviewed before beginning the application process.

Step 2 – Review of Manufacturing Facility

The manufacturing facility should be assessed for:

Production machinery
Raw-material handling
Moulding facilities
Quality-control arrangements
Testing facilities
Inspection facilities
Skilled manpower
Calibration arrangements

Step 3 – Documentation Preparation

The required technical and business documents are prepared for the BIS application. These may include:

Factory layout
Manufacturing process flow
Product drawings
Raw-material details
Machinery details
Testing equipment details
Calibration certificates
Quality-control documents
Test reports, where applicable
Company documents
Authorized signatory documents
Applicable statutory documents

Step 4 – Product Testing

Samples are tested according to the applicable requirements of IS 14625. The BIS Product Manual specifies a sample size of 60 bottles in its certification guidance, subject to the applicable product and testing requirements.

Step 5 – BIS Application Filing

After preparing the required information and documentation, the manufacturer submits the BIS application through the applicable BIS certification process.

Step 6 – Factory Inspection

BIS may assess the manufacturing premises, production facilities, testing arrangements and quality-control system. The manufacturer should be prepared to demonstrate that the required facilities and controls are available and operational.

Step 7 – Compliance and BIS Licence

After satisfactory completion of the applicable assessment, testing and compliance requirements, BIS may grant the licence for use of the BIS Standard Mark within the approved scope.

Important Documents for BIS Licence

Manufacturers should maintain proper documentation for the BIS certification process. Commonly required documents may include:

Company registration documents
Factory address and details
Manufacturing process flow chart
Factory layout
Product drawings
Raw-material specifications
Material details
Machinery list
Testing equipment list
Calibration certificates
Quality-control records
Internal test records
Product test reports
Authorized signatory documents
Applicable legal/statutory documents

The exact document requirements can vary depending on the applicant, manufacturing setup and applicable BIS requirements.

Manufacturing and Testing Facilities

The manufacturer must have the necessary manufacturing and testing facilities for the types proposed to be included in the BIS licence. The BIS grouping guidelines specifically state that the firm should have the necessary manufacturing and testing facilities for the types included in the licence. Therefore, manufacturers should verify their factory infrastructure before submitting the BIS application.

BIS Certification for Indian Manufacturers

For Indian manufacturers, obtaining BIS certification involves demonstrating that the manufacturing facility and product comply with the applicable requirements of IS 14625. A successful application requires coordination between: Product → Raw Material → Manufacturing → Testing → Documentation → BIS Application → Factory Assessment → Licence Proper preparation at each stage can help reduce delays and avoid avoidable non-compliances.

BIS Certification for Foreign Manufacturers

Foreign manufacturers supplying Plastic Feeding Bottles to the Indian market may also need to address the applicable BIS certification requirements. The BIS product manual notes that certification under Scheme-I can involve prospective applicants and includes reference to FMCS in the context of the product manual. Foreign manufacturers should therefore assess the applicability of IS 14625:2015 before exporting Plastic Feeding Bottles to India.

BIS License Consultancy for Plastic Feeding Bottles

Obtaining a BIS licence for Plastic Feeding Bottles involves more than simply submitting an application. Manufacturers need to correctly manage:

Standard applicability
Product scope
Material selection
Product grouping
Product drawings
Testing
Factory facilities
Documentation
BIS application
Factory inspection
Compliance requirements

Qualitance India provides professional BIS License Consultancy for Plastic Feeding Bottles under IS 14625:2015. Our consultancy support can include:

BIS applicability assessment
IS 14625 requirement review
Product scope assessment
Product grouping guidance
Documentation preparation
Laboratory testing coordination
BIS application support
Factory inspection preparation
Technical compliance support
BIS query assistance
Licence process support
Post-certification compliance guidance

Why Choose Qualitance India for BIS Certification?

For a product intended for infant feeding, compliance should be approached carefully and systematically. Qualitance India — Your Certification & Compliance Partner helps manufacturers understand the applicable Indian Standard and manage the BIS certification process from initial assessment through licensing. Our objective is to provide manufacturers with practical, professional and end-to-end BIS certification consultancy.

Frequently Asked Questions

Is BIS certification mandatory for Plastic Feeding Bottles?

Yes. BIS lists IS 14625:2015 – Plastic Feeding Bottles under mandatory BIS certification associated with the Infant Milk Substitutes, Feeding Bottles and Infant Foods (Regulation of Production, Supply and Distribution) Act, 1992.

What is the BIS standard for Plastic Feeding Bottles?

The applicable Indian Standard is IS 14625:2015 – Plastics Feeding Bottles (First Revision).

What materials can be used for Plastic Feeding Bottles?

The BIS product manual identifies materials such as PP and PES, along with other applicable materials covered by IS 14625. The manufacturer must declare the material type proposed for inclusion in the licence.

What tests are required for IS 14625?

Depending on the applicable product requirements, testing can include physical requirements, wall thickness, capacity, transparency, leakage, drop, ageing resistance, compressive deformation, printing resistance, material identification, migration and other chemical-safety tests.

How many samples are required for BIS certification?

The BIS Product Manual specifies 60 bottles as the product sample size in its certification guidance, subject to the applicable requirements.

Can Qualitance India help with BIS License for Plastic Feeding Bottles?

Yes. Qualitance India provides BIS License Consultancy for Plastic Feeding Bottles under IS 14625:2015, including documentation, testing coordination, application support and factory inspection preparation.

Conclusion

BIS Certification for Plastic Feeding Bottles under IS 14625:2015 is an important regulatory requirement for manufacturers covered by the applicable mandatory certification framework. Because Plastic Feeding Bottles are products intended for infant feeding, manufacturers need to pay particular attention to material safety, design, dimensions, wall thickness, leakage, durability, migration requirements, testing and manufacturing quality. A properly planned BIS certification process can help manufacturers achieve compliance efficiently and obtain the required BIS licence for their approved product scope. If you are a Plastic Feeding Bottle Manufacturer, Importer or Business supplying feeding bottles in India, it is important to assess your BIS requirements before starting commercial supply.

Need BIS Certification for Plastic Feeding Bottles?

Qualitance India can assist you with BIS License Consultancy for IS 14625:2015. Phone: +91-9310-615-170 Email: info@qualitanceindia.com Website: qualitanceindia.com Qualitance India — Your Certification & Compliance Partner.