BIS Certification for Sports Footwear for General Purpose – IS 15844 (Part 1):2023

Introduction

BIS Certification for Sports Footwear for General Purpose is a mandatory conformity requirement for products covered by IS 15844 (Part 1):2023 – Sports Footwear Part 1: General Purpose. BIS's current compulsory-certification listing includes IS 15844 (Part 1):2023 under the footwear quality-control framework.

IS 15844 (Part 1):2023 is the revised standard for general-purpose sports footwear. The earlier IS 15844:2010 sports-footwear standard was split into separate standards covering general-purpose, performance and professional sports footwear. BIS issued implementation guidance for the revised standards in 2023.

The BIS Product Manual states that certification under IS 15844 (Part 1):2023 operates under Scheme-I, and provides requirements relating to sampling, product grouping, testing equipment, scope of licence and the Scheme of Inspection and Testing.

BIS subsequently issued guidelines for Amendment No. 1 to IS 15844 (Part 1):2023. The amendment introduced important changes including separate categories for kids and adults, types for adult footwear, revised whole-footwear requirements and additional requirements relating to areas such as chemical requirements and lead content for PVC. BIS required implementation by 31 July 2024.

For manufacturers, import-related businesses and footwear companies dealing with covered products, understanding the applicable standard, product scope, testing requirements and BIS licensing procedure is essential for regulatory compliance.

About the Product

Sports Footwear for General Purpose refers to sports footwear intended for general or casual use rather than specialized performance or professional sporting applications.

The footwear can contain different combinations of:

Leather upper
Fabric upper
PU-coated material
Other upper materials
Lining
Insole
Midsole
Outsole
EVA
PU
Fasteners
Laces
Buckles
Eyelets
D-Rings
Ski Hooks
Metal trims
Velcro fasteners
Elastic tape
Counter stiffeners

The BIS Product Manual provides a detailed framework for defining the materials and construction features included within the licence scope.

What is BIS Certification?

BIS Certification is a conformity-assessment system administered by the Bureau of Indian Standards (BIS).

For products covered under compulsory certification, manufacturers must demonstrate conformity with the applicable Indian Standard and obtain the applicable BIS licence before using the Standard Mark in accordance with BIS requirements.

Sports Footwear for General Purpose under IS 15844 (Part 1):2023 is listed by BIS under compulsory certification.

Certification involves activities such as:

Application submission
Documentation
Product testing
Factory assessment
Quality-control verification
Sampling
Technical evaluation
Compliance with Scheme of Inspection and Testing
Grant of licence
Ongoing surveillance

What is IS 15844 (Part 1):2023?

IS 15844 (Part 1):2023 is titled:

Sports Footwear – Part 1: General Purpose

It is the first revision covering general-purpose sports footwear.

BIS's 2023 implementation guidance explains that the earlier IS 15844:2010 was split into:

IS 15844 (Part 1):2023 – Sports Footwear Part 1: General Purpose
IS 15844 (Part 2):2023 – Sports Footwear Part 2: Performance Sports Footwear
IS 15844 (Part 3):2024 – Sports Footwear for Professional Sports Footwear

The revised structure distinguishes general-purpose footwear from performance and professional sports footwear.

Scope of IS 15844 (Part 1):2023

The standard applies to general-purpose sports footwear within its defined product scope.

The BIS Product Manual identifies licence-scope parameters including:

Upper material
Lining
Insole
Outsole
Midsole
Counter stiffener
Velcro fastener
Elastic tape
Fasteners
Washability
Sizes

For upper materials, the Product Manual includes leather and non-leather options such as knitted/non-knitted fabric, coated/uncoated fabric and other materials with or without PU.

Categories Under Amendment No. 1

Amendment No. 1 made significant changes to the categorization of general-purpose sports footwear.

The general-purpose category was divided into:

1. Kids

Sports footwear intended for kids, with sizing referenced to IS 1638.

2. Adults

Adult sports footwear was further divided into:

Type 1
Type 2

BIS's implementation circular specifically explains these category and type changes.

The applicable category/type should therefore be properly identified before finalizing the BIS licence scope.

Products Covered

Depending on the applicable scope and construction, products can include:

General-purpose sports shoes
Casual sports shoes
General-purpose athletic-style footwear
Kids' general-purpose sports shoes
Adult general-purpose sports shoes
Sports footwear with leather upper
Sports footwear with fabric upper
Sports footwear with PU material
Sports footwear with EVA midsole
Sports footwear with PU outsole
Sports footwear with composite outsole
Sports footwear with multilayer outsole
Sports footwear with laces
Sports footwear with buckles
Sports footwear with eyelets
Sports footwear with Velcro
Washable sports footwear

The exact licence scope depends on the combinations of materials, components, categories, types and sizes proposed by the manufacturer.

Materials Covered in Licence Scope

The BIS Product Manual provides detailed material combinations.

Upper

Leather
Fabric
Knitted fabric
Non-knitted fabric
Coated fabric
Uncoated fabric
Other materials
PU-containing materials
Materials without PU

Lining

With lining
Without lining

Insole

With insole
Without insole

Outsole

Normal
Composite
Single layer
Multilayer
Cellular
Solid
PU
Other materials

Midsole

With midsole
Without midsole
EVA
Other materials

Other Components

Counter stiffener
Velcro fastener
Elastic tape
Laces
Buckles
Eyelets
D-Rings
Ski Hooks
Metal trims

These parameters are specifically reflected in the BIS Product Manual's licence-scope framework.

Enforcement / Implementation Date

BIS issued implementation guidance in 2023 for the revised footwear standards.

For the revised Sports Footwear standard, BIS stated that the new requirements were to be implemented from 1 July 2023, while products affected by recently revised standards, including IS 15844, received additional time up to 31 December 2023 to comply with the revised specifications.

Subsequently, Amendment No. 1 to IS 15844 (Part 1):2023 was issued, and BIS required licencees/applicants to implement that amendment by 31 July 2024. After that date, applications/grants could not proceed without consideration of the amendment.

Important: Website content should use the current amended requirements rather than relying only on the original 2023 implementation date.

Applicable QCO Details

Particular	Details
Product	Sports Footwear for General Purpose
Indian Standard	IS 15844 (Part 1):2023
Standard Title	Sports Footwear – Part 1: General Purpose
Certification	Mandatory
Certification Scheme	Scheme-I
BIS Mark	Standard Mark/ISI Mark as applicable
Product Category	General Purpose Sports Footwear
Kids Category	Applicable under Amendment No. 1
Adult Category	Type 1 and Type 2
Product Testing	Mandatory as applicable
Factory Assessment	Applicable
Product Grouping	As per BIS Product Manual

BIS's compulsory-certification list identifies IS 15844 (Part 1):2023 as a mandatory-certification product.

Who Needs BIS Certification?

BIS certification can be required for manufacturers producing covered sports footwear for general-purpose use.

This can include:

Sports footwear manufacturers
Sports shoe manufacturers
Footwear factories
Shoe manufacturing companies
Kids' sports shoe manufacturers
Adult sports footwear manufacturers
Leather sports shoe manufacturers
Synthetic sports shoe manufacturers
Fabric sports shoe manufacturers
PU footwear manufacturers
EVA footwear manufacturers
OEM footwear manufacturers
Eligible foreign manufacturers

The exact legal applicability should always be assessed against the current QCO and BIS product listing.

Eligibility Criteria

A manufacturer seeking BIS certification should have appropriate:

Manufacturing Facilities

Cutting facilities
Stitching facilities
Upper manufacturing facilities
Sole manufacturing facilities
Assembly facilities
Finishing facilities
Packaging facilities

Quality-Control Facilities

Inspection arrangements
Testing facilities or approved testing arrangements
Measuring equipment
Calibration system
Trained quality personnel

Documentation

Manufacturing process
Product specifications
Raw-material declarations
Testing records
Quality-control procedures
Product marking details
Factory records

Complete BIS Certification Process

Step 1 – Product Applicability Assessment

Confirm that the footwear falls under IS 15844 (Part 1):2023 – General Purpose.

Step 2 – Identify Category and Type

Determine whether the product is:

Kids
Adults Type 1
Adults Type 2

Step 3 – Identify Material Combination

Identify:

Upper
Lining
Insole
Midsole
Outsole
Fasteners
Other components

Step 4 – Product Grouping

Prepare product combinations according to BIS grouping guidelines.

Step 5 – Factory Assessment

Check manufacturing and testing readiness.

Step 6 – Documentation

Prepare BIS application documents and technical records.

Step 7 – Sample Selection

Select representative samples according to the applicable grouping.

The original BIS Product Manual specifies 3 pairs of shoes for each variety, consisting of 2 pairs for physical testing and 1 pair for chemical analysis.

Step 8 – Product Testing

Conduct applicable physical and chemical tests.

Step 9 – BIS Application

Submit the application through the applicable BIS process.

Step 10 – Application Scrutiny

BIS reviews the application and supporting information.

Step 11 – Factory Inspection

BIS assesses the manufacturing and quality-control arrangements.

Step 12 – Sample/Test Verification

Applicable samples and test results are evaluated.

Step 13 – Observation Closure

Address technical or documentation observations.

Step 14 – Grant of Licence

After satisfying applicable requirements, BIS can grant the licence.

Step 15 – Standard Mark Compliance

Use the Standard Mark according to licence conditions.

Step 16 – Continuous Compliance

Maintain testing, production control, records and surveillance compliance.

Required Documents

Common documents may include:

Company registration certificate
Factory registration documents
Factory address proof
Manufacturing licence, where applicable
Factory layout
Manufacturing process flow chart
Machinery list
Testing equipment list
Calibration certificates
Product specifications
Product catalogue
Product drawings/design details
Raw-material specifications
Raw-material declarations
Supplier details
Quality-control plan
Internal test reports
Finished-product inspection records
Product marking details
Packaging details
Trademark documents
Authorized signatory documents
BIS application documents
Undertakings/declarations as applicable

The final document list should be checked against the current BIS application requirements.

Testing Requirements

Testing is one of the most important stages of BIS certification for sports footwear.

BIS laboratory listings for IS 15844 (Part 1):2023 show a broad testing scope covering physical, performance and chemical requirements.

Important testing areas include:

1. Sampling and Conditioning

Samples are conditioned and prepared according to the applicable test method.

2. Construction

The footwear is checked against applicable construction requirements.

3. Whole Footwear Requirements

Depending on category/type and construction, testing can include:

Insole
Toe spring height
Upper-to-midsole/outsole bond performance
Upper-to-composite-sole bond performance
Interlayer bond strength
Energy absorption at seat region
Complete shoe flexing
Washability
Slip resistance

BIS's Amendment No. 1 revised the whole-footwear requirements and renamed the multilayer outsole/midsole bond requirement as interlayer bond strength for the applicable construction.

4. Upper Material Testing

Depending on material:

Flexing resistance
Tear strength
Colour fastness to rubbing
Stitch tear strength
Colour fastness to light
Breaking strength
Elongation at break
Other applicable properties

5. Sole Material Testing

Depending on material and construction:

Abrasion resistance
Flexing resistance
Hydrolysis resistance
Tear strength
Tensile strength
Elongation
Compression set
Heat shrinkage
Density
Other applicable requirements

6. Fastener Testing

Where applicable:

Lace breaking strength
Lace tag strength
Lace-to-lace abrasion
Colour fastness
Buckle/Ski Hook strength
Corrosion resistance

The BIS Product Manual identifies these testing areas and related equipment requirements.

7. Chemical Requirements

Chemical requirements can apply to footwear components and the whole footwear according to the amended requirements.

8. Lead Content

Amendment No. 1 introduced a lead-content requirement applicable to PVC on the whole footwear.

9. Other Chemical Parameters

BIS laboratory listings show testing for parameters including:

Formaldehyde
Organotin compounds
Polychlorophenols
pH
Phthalates
Chromium VI
Aromatic amines
Lead content

The exact chemical testing scope depends on the applicable product construction and current standard requirements.

Product Grouping Under IS 15844 Part 1

Product grouping is particularly important for sports footwear because a manufacturer may produce multiple combinations of:

Materials
Sizes
Upper constructions
Outsole constructions
Midsole materials
Fasteners
Washable/non-washable footwear
Kids/adult categories
Adult types

The BIS Product Manual provides grouping rules for these combinations.

For example:

If coloured leather is tested, non-coloured leather may be covered.
If knitted fabric is tested, non-knitted fabric may be covered.
If coated fabric is tested, non-coated fabric may be covered.
If material with PU is tested, material without PU may be covered.
If composite outsole is tested, normal outsole may be covered.
If multilayer outsole is tested, single-layer outsole may be covered.
If PU outsole is tested, applicable other-material outsole may be covered.

However, the exact grouping must be evaluated against the current BIS Product Manual and proposed licence scope.

Sampling Requirements

The BIS Product Manual specifies:

Sample size: 3 pairs of shoes for each variety

2 pairs: Physical testing
1 pair: Chemical analysis

For grant of licence or inclusion of varieties, the Product Manual also states that one sample of each applicable material combination of footwear parts may be drawn and tested according to the grouping guidelines.

Factory Inspection Process

During BIS factory assessment, the manufacturer should be prepared to demonstrate control over:

Raw Materials

Leather
Fabric
PU
EVA
Rubber/polymeric materials
Sole materials
Laces
Fasteners
Adhesives
Other components

Manufacturing

Cutting
Stitching
Upper preparation
Sole production
Sole attachment
Assembly
Finishing
Inspection
Packing

Quality Control

Incoming material inspection
In-process inspection
Finished-product testing
Batch records
Rejection records
Corrective actions
Calibration

Testing

The manufacturer should maintain applicable testing equipment or an acceptable testing arrangement according to BIS requirements.

The Product Manual provides a list of major test equipment for the standard.

Common Reasons for BIS Certification Rejection

Common compliance problems may include:

Incorrect standard selection
Incorrect product category
Incorrect adult type
Incomplete product scope
Incorrect grouping
Inadequate samples
Failed physical testing
Failed chemical testing
Failed bond-strength testing
Failed flexing test
Failed abrasion test
Failed slip-resistance test
Failed tear-strength test
Failed tensile testing
PVC lead-content non-compliance
Chemical non-compliance
Inadequate testing facilities
Calibration issues
Poor raw-material control
Incomplete manufacturing records
Incorrect product marking
Incomplete documentation
Factory inspection observations
Failure to close BIS observations
Non-implementation of applicable amendment requirements

BIS Certification Cost for Sports Footwear

There is no single fixed BIS certification cost for all sports footwear manufacturers.

The total cost can vary depending on:

Number of footwear varieties
Number of material combinations
Kids/adult categories
Adult Type 1/Type 2
Number of sizes
Product grouping
Number of tests
Laboratory charges
BIS application charges
Inspection expenses
Testing equipment
Calibration
Consultancy
Re-testing, if required

BIS LIMS listings show that testing charges vary by laboratory and by individual test parameters, so an accurate quotation should be prepared after reviewing the actual footwear construction and proposed licence scope.

BIS Certification Timeline

The certification timeline can depend on:

Product complexity
Number of varieties
Product grouping
Sample readiness
Laboratory availability
Test results
Documentation
Factory readiness
BIS scrutiny
Inspection scheduling
Technical observations
Re-testing requirements

Manufacturers can reduce avoidable delays by completing factory preparation, documentation and testing arrangements before submitting the application.

Benefits of BIS Certification

Regulatory Compliance

Helps manufacturers comply with mandatory BIS requirements applicable to covered sports footwear.

Product Quality

Encourages systematic control of footwear materials and performance characteristics.

Customer Confidence

BIS certification can improve confidence among buyers and distributors.

Market Acceptance

Compliance supports lawful supply of covered products in the Indian market.

Better Quality Control

Manufacturers establish documented testing and inspection procedures.

Brand Credibility

The applicable Standard Mark can strengthen product credibility when used according to BIS licence conditions.

Improved Manufacturing Control

The BIS process encourages better control of:

Raw materials
Production
Testing
Traceability
Finished products

Why Choose Qualitance India?

Qualitance India provides professional BIS Certification Consultancy for sports footwear manufacturers and footwear companies.

Our BIS Consultancy Services Include:

✓ Product Applicability Assessment ✓ IS 15844 Part 1 Requirement Guidance ✓ Kids/Adult Category Assessment ✓ Adult Type 1/Type 2 Scope Guidance ✓ Product Grouping Support ✓ BIS Documentation Support ✓ Testing Coordination ✓ Laboratory Coordination ✓ Sample Preparation Guidance ✓ BIS Application Assistance ✓ Factory Inspection Preparation ✓ Quality-Control Documentation ✓ Technical Query Assistance ✓ ISI Mark Compliance Guidance ✓ End-to-End BIS Certification Support

Contact Qualitance India

Phone: +91-9310-615-170 Email: info@qualitanceindia.com Website: https://qualitanceindia.com/

Qualitance India – Improving Quality and Competence

Step-by-Step BIS Certification Flow Chart

Product Identification ↓ IS 15844 Part 1 Applicability Check ↓ General Purpose Category Confirmation ↓ Kids / Adult Identification ↓ Adult Type 1 / Type 2 Identification ↓ Material Combination Assessment ↓ Product Grouping ↓ Factory Readiness Assessment ↓ Documentation Preparation ↓ Sample Selection ↓ Product Testing ↓ BIS Application Submission ↓ Application Scrutiny ↓ Factory Inspection ↓ Technical Observation Closure ↓ BIS Licence Grant ↓ ISI/Standard Mark Compliance ↓ Regular Testing & Surveillance

25 SEO FAQs

1. Is BIS Certification mandatory for sports footwear?

Yes. BIS currently lists IS 15844 (Part 1):2023 – Sports Footwear Part 1 General Purpose under compulsory certification.

2. What is IS 15844 Part 1:2023?

It is the Indian Standard titled Sports Footwear – Part 1: General Purpose.

3. What does IS 15844 Part 1 cover?

It covers sports footwear for general-purpose applications within the scope and categories defined by the standard.

4. What is the difference between Part 1 and Part 2?

Part 1 covers General Purpose Sports Footwear, while Part 2 covers Performance Sports Footwear. BIS also separately lists Part 3 for professional sports footwear.

5. Is IS 15844 Part 1 certification mandatory in India?

Yes, BIS's current compulsory-certification listing identifies the product as subject to mandatory certification.

6. What categories are covered after Amendment No. 1?

General-purpose sports footwear is divided into Kids and Adults, with adult footwear divided into Type 1 and Type 2.

7. What materials can be used in sports footwear?

The licence scope can include leather, fabric, PU and other materials, along with different lining, insole, outsole and midsole configurations.

8. What tests are required for sports footwear?

Testing can include construction, toe spring, bond performance, energy absorption, shoe flexing, washability, slip resistance, material properties and chemical requirements.

9. Is chemical testing required?

Yes, applicable chemical requirements form part of the certification framework.

10. Is lead testing required?

Amendment No. 1 introduced lead-content requirements applicable to PVC on the whole footwear.

11. What is the sample size for IS 15844 Part 1?

The BIS Product Manual specifies 3 pairs per variety, with 2 pairs for physical testing and 1 pair for chemical analysis.

12. Is factory inspection required?

Factory assessment forms part of the applicable BIS certification process.

13. What documents are required?

Documents can include factory details, manufacturing process, machinery, testing equipment, calibration records, product specifications, raw-material declarations, quality-control records and marking information.

14. Can kids' sports shoes be included in the BIS licence?

Yes, the amended standard specifically provides a Kids category.

15. Can adult sports shoes be covered?

Yes. Adult sports footwear is divided into Type 1 and Type 2 under Amendment No. 1.

16. Can leather sports shoes be certified?

Yes, leather is included as an upper-material option within the BIS Product Manual scope.

17. Can fabric sports shoes be certified?

Yes. Fabric, including knitted/non-knitted and coated/uncoated configurations, is included within the scope framework.

18. Can PU sports shoes be certified?

Yes, PU-containing materials and PU outsoles are included in the Product Manual's material/grouping framework.

19. What is product grouping in sports footwear BIS certification?

Product grouping determines how different material combinations and footwear varieties can be represented within the licence scope based on representative testing.

20. How much does BIS certification for sports footwear cost?

The cost depends on varieties, materials, testing requirements, laboratory charges, inspection, application expenses and other applicable costs.

21. How long does sports footwear BIS certification take?

The timeline varies depending on documentation, testing, factory readiness, laboratory availability, inspection and BIS observations.

22. What is the BIS Mark for sports footwear?

The applicable Standard Mark/ISI Mark may be used according to the BIS licence and applicable marking requirements.

23. Is testing available for IS 15844 Part 1?

Yes. BIS LIMS lists laboratories and testing scopes for IS 15844 Part 1:2023.

24. When was Amendment No. 1 implemented?

BIS required implementation of Amendment No. 1 by 31 July 2024.

25. How can I get BIS Certification for Sports Footwear?

Confirm the standard and product category, identify materials and varieties, prepare product grouping and documentation, conduct required testing, submit the BIS application, complete factory assessment and satisfy all applicable BIS requirements.

FAQ Schema Content

Recommended Schema: FAQPage

Use the 25 FAQs above as visible FAQ content and create matching FAQ structured data.

The structured-data answers should match the visible answers on the webpage.

Service Schema Suggestion

Schema Type: Service

Service Name: BIS Certification Consultancy for Sports Footwear for General Purpose

Service Type: BIS Certification Consultancy

Standard: IS 15844 (Part 1):2023

Provider: Qualitance India

Area Served: India

Description: BIS certification consultancy for sports footwear manufacturers as per IS 15844 (Part 1):2023, including product scope assessment, product grouping, documentation, testing coordination, BIS application and factory inspection support.

Organization Schema Suggestion

Schema Type: Organization

Organization Name: Qualitance India

Tagline: Improving Quality and Competence

Telephone: +91-9310-615-170

Email: info@qualitanceindia.com

Website: https://qualitanceindia.com/

Breadcrumb Schema Suggestion

Home → BIS Certification → Footwear BIS Certification → Sports Footwear Certification → IS 15844 Part 1:2023

Article Schema Suggestion

Schema Type: Article / BlogPosting

Headline: BIS Certification for Sports Footwear for General Purpose – IS 15844 (Part 1):2023

Author: Qualitance India

Publisher: Qualitance India

Article Section: BIS Certification / Footwear Certification

Keywords: BIS Certification for Sports Footwear, IS 15844 Part 1:2023, Sports Shoe BIS Certification, Sports Footwear BIS Licence

Internal Linking Strategy

Is blog ko website ke relevant BIS pages ke saath internally link karein.

Recommended Anchor Text

BIS Certification Process
BIS Certification Cost
BIS Certification Documents
BIS Product Testing
BIS Factory Inspection
Footwear BIS Certification
Sports Shoe BIS Certification
BIS QCO Compliance
ISI Mark Certification
BIS Certification Consultancy

External Authority References – BIS/QCO

For website E-E-A-T and compliance credibility, official BIS sources ko primary references rakhein:

BIS Scheme-I / Compulsory Certification List
BIS IS 15844 (Part 1):2023 Standard Page
BIS Product Manual for IS 15844 (Part 1):2023
BIS 2023 Footwear Implementation Guidance
BIS Amendment No. 1 Implementation Guidelines
BIS LIMS Testing Scope
Applicable Footwear Quality Control Orders
BIS Scheme of Inspection and Testing

BIS's current compulsory-certification list identifies IS 15844 (Part 1):2023 under footwear products.

Related BIS Services

BIS Certification for Sports Footwear
BIS Certification for Sports Shoes
BIS Certification for Performance Sports Footwear
BIS Certification for Professional Sports Footwear
BIS Certification for Leather Footwear
BIS Certification for Footwear Products
BIS ISI Mark Certification
BIS Product Testing
BIS Factory Inspection Assistance
BIS Documentation Support
BIS Application Assistance
BIS QCO Compliance
BIS Testing Coordination

Related Blog Suggestions

BIS Certification for Sports Footwear – Complete Guide
IS 15844 Part 1:2023 – Complete Guide
BIS Certification for Sports Shoes in India
BIS Certification Process for Sports Footwear
BIS Certification Cost for Sports Shoes
Documents Required for Sports Footwear BIS Certification
IS 15844 Part 1 Testing Requirements
Sports Footwear Product Grouping Under BIS
BIS Factory Inspection for Sports Shoe Manufacturers
BIS Certification for Kids Sports Shoes
BIS Certification for Adult Sports Shoes
IS 15844 Part 1 Amendment No. 1 Explained
Difference Between IS 15844 Part 1 and Part 2
Sports Footwear BIS Testing Laboratory
Sports Shoe Slip Resistance Testing
Sports Shoe Flexing Resistance Testing
Sports Footwear Bond Strength Testing
Sports Shoe Chemical Testing Requirements
BIS Certification for PU Sports Shoes
BIS Certification for Leather Sports Shoes
BIS Certification for Fabric Sports Shoes
Sports Footwear ISI Mark Requirements
Common Reasons for Sports Footwear BIS Rejection
How to Prepare Sports Shoe Factory for BIS Inspection
BIS Certification Guide for Footwear Manufacturers

Strong Lead Generation CTA

Need BIS Certification for Sports Footwear?

Are you a Sports Footwear Manufacturer, Sports Shoe Manufacturer, Kids Sports Shoe Manufacturer, Adult Sports Shoe Manufacturer or Footwear Company looking for BIS certification support?

Qualitance India can assist you with:

✓ IS 15844 Part 1 Applicability Assessment ✓ Kids/Adult Category Assessment ✓ Adult Type 1/Type 2 Scope Guidance ✓ Product Grouping ✓ BIS Documentation ✓ Testing Coordination ✓ Laboratory Coordination ✓ Sample Preparation ✓ BIS Application Assistance ✓ Factory Inspection Preparation ✓ Quality-Control Documentation ✓ Technical Query Support ✓ ISI Mark Compliance ✓ End-to-End BIS Certification Consultancy

Get Expert BIS Certification Support

Call / WhatsApp: +91-9310-615-170 Email: info@qualitanceindia.com Website: https://qualitanceindia.com/

Qualitance India – Improving Quality and Competence

Conclusion

BIS Certification for Sports Footwear for General Purpose is an important mandatory compliance requirement for covered footwear products under IS 15844 (Part 1):2023. BIS's current compulsory-certification listing includes this standard under the applicable footwear certification framework.

IS 15844 (Part 1):2023 provides requirements for general-purpose sports footwear and covers different combinations of upper materials, lining, insoles, midsoles, outsoles, fasteners and other footwear components.

The standard has also undergone Amendment No. 1, which introduced important changes to product categories, adult types, whole-footwear requirements, chemical requirements and marking. BIS required implementation of the amendment by 31 July 2024.

For manufacturers, the certification process involves product applicability assessment, material and category identification, product grouping, sample selection, testing, documentation, BIS application, factory inspection and ongoing compliance.

With professional assistance from Qualitance India, manufacturers can receive end-to-end support for BIS documentation, product testing, product grouping, application submission, factory inspection preparation and ISI Mark compliance.