BIS Certification for Whirlpool Baths and Whirlpool Spas – IS 302 (Part 1):2024 | IEC 60335-1:2020
Introduction
Whirlpool Baths and Whirlpool Spas are electrical appliances that combine water, electrical components, pumps, heating systems and control equipment. Because these appliances are used in close proximity to water and people, electrical safety, protection against electric shock, temperature control, mechanical safety and proper construction are important considerations.
For appliances covered under the applicable product scope, IS 302 (Part 1):2024 / IEC 60335-1:2020 provides the general safety requirements for household and similar electrical appliances. BIS identifies IS 302 (Part 1):2024 as the seventh revision, with IEC 60335-1:2020 as the identical/equivalent international standard.
BIS's current Scheme-I product list specifically includes Whirlpool Baths and Whirlpool Spas under the electrical-appliance certification framework.
For manufacturers and businesses supplying these products in India, understanding the applicable standard, testing requirements, documentation, product grouping and certification process is important before applying for a BIS licence.
About Whirlpool Baths and Whirlpool Spas
A Whirlpool Bath or Whirlpool Spa is an appliance designed to provide water-based bathing or hydrotherapy through systems such as:
- Water circulation
- Water jets
- Air jets
- Pumps
- Electric heaters
- Control panels
- Sensors
- Electrical switching devices
- Other electrical components
Depending on the design, these appliances can be installed in:
- Residential bathrooms
- Hotels
- Resorts
- Spas
- Wellness centres
- Health and recreational facilities
- Commercial establishments
The electrical construction of these products needs to be evaluated carefully because the appliance combines water and electricity.
What is IS 302 (Part 1):2024?
IS 302 (Part 1):2024 / IEC 60335-1:2020 is titled:
Household and Similar Electrical Appliances – Safety – Part 1: General Requirements
It is the seventh revision of the Indian Standard and is identified by BIS as identical under dual numbering with IEC 60335-1:2020.
The standard establishes general safety requirements applicable to household and similar electrical appliances.
The BIS Product Manual for IS 302 (Part 1):2024 is used as reference material for certification under Scheme-I of the BIS Conformity Assessment Regulations, 2018.
Whirlpool Baths and Whirlpool Spas Under BIS
BIS's current Scheme-I listing specifically includes:
Whirlpool Baths and Whirlpool Spas
under the product categories covered by the electrical appliance safety framework.
Therefore, manufacturers should determine the exact construction and intended use of their appliance and identify all applicable BIS requirements before beginning the certification process.
Applicable Standard
The primary standard mentioned for this product category is:
IS 302 (Part 1):2024
Corresponding international standard:
IEC 60335-1:2020
The BIS standard database identifies the standard as:
- IS Number: IS 302 (Part 1):2024
- IEC: 60335-1:2020
- Revision: Seventh Revision
- Technical Department: Electrotechnical Department
- Product Group: Electrical Appliances and Accessories
- Sub Group: Domestic Appliances
- Aspect: Safety Standard
Applicable Certification Framework
The BIS Product Manual states that certification under this standard is operated under Scheme-I of the BIS Conformity Assessment Regulations, 2018.
BIS also provides specific guidelines concerning implementation of the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2024 and the revised IS 302 (Part 1):2024 / IEC 60335-1:2020.
Manufacturers should verify the latest applicable implementation requirements before placing products on the Indian market.
Products Covered
The relevant product category includes:
Whirlpool Baths
and
Whirlpool Spas
Depending on the product design, these may include electrically operated:
- Whirlpool bath systems
- Whirlpool spa systems
- Water-jet systems
- Air-jet systems
- Heated whirlpool systems
- Pump-operated systems
- Electrically controlled spa systems
The exact applicability should be assessed based on the construction and intended use of the particular appliance.
Important Safety Areas
Whirlpool Baths and Whirlpool Spas involve several safety considerations.
Important areas can include:
Protection Against Electric Shock
The appliance should provide appropriate protection against accidental contact with live electrical parts.
Water and Electrical Safety
Electrical components must be appropriately protected considering the presence of water.
Leakage Current
The appliance is evaluated for applicable leakage-current requirements.
Electric Strength
Electrical insulation must withstand the applicable electric-strength test.
Temperature Rise
Temperature rise of relevant components is evaluated under specified operating conditions.
Mechanical Safety
The construction should withstand applicable mechanical stresses.
Abnormal Operation
The appliance may need to be evaluated under abnormal operating conditions.
Moisture Resistance
The appliance's construction must provide appropriate protection against moisture according to applicable requirements.
Marking and Instructions
Required product markings and instructions must be provided.
Construction of Whirlpool Spas
A typical electrically operated Whirlpool Spa may contain:
- Water pump
- Electric motor
- Heating element
- Water circulation system
- Jet assembly
- Air blower
- Control panel
- Temperature sensor
- Safety thermostat
- Electrical wiring
- Switches
- Printed circuit boards
- Enclosures
- Insulation
- Earthing system
The actual components depend on the product design.
The BIS Product Manual for IS 302 Part 1 identifies components as per Clause 24 among the raw-material/component considerations.
Electrical Components
Manufacturers should maintain proper control over components used in the appliance.
These can include:
- Motors
- Pumps
- Heating elements
- Thermostats
- Switches
- Controllers
- Sensors
- Wiring
- Plugs
- Terminals
- Protective devices
- Insulation materials
The suitability of components should be evaluated against the applicable requirements.
Marking Requirements
Proper product marking is an important part of certification.
Depending on the applicable requirements, product identification can include information such as:
- Manufacturer's name or trademark
- Model/reference
- Rated voltage
- Rated frequency
- Rated power/current
- Other applicable ratings
- Required warnings
- Applicable certification marking
The exact marking requirements should be checked against the latest applicable edition and BIS certification conditions.
Instructions and User Information
Because Whirlpool Baths and Whirlpool Spas involve water and electricity, clear instructions are important.
Instructions may need to address:
- Installation
- Electrical connection
- Earthing
- Operating conditions
- Water requirements
- Cleaning
- Maintenance
- Safety precautions
- Warning information
- Servicing
- Restrictions on use
The applicable instructions must comply with the requirements of the standard and the product's actual construction.
Testing Requirements
Testing for Whirlpool Baths and Whirlpool Spas under the applicable IS 302 Part 1 framework can involve a range of safety tests.
Important areas include:
- General requirements
- Marking and instructions
- Protection against electric shock
- Starting of motor operation
- Power input
- Current input
- Heating
- Leakage current
- Electric strength
- Transient overvoltage
- Moisture-related safety
- Abnormal operation
- Mechanical strength
- Construction
- Internal wiring
- Components
- Earthing
- Clearances and creepage distances
- Resistance to heat and fire
The exact test programme depends on the appliance construction and applicable clauses.
BIS LIMS currently lists Whirlpool Baths and Whirlpool Spas as a specific testing category under IS 302 Part 1.
BIS Laboratory Testing Cost
Current BIS LIMS information shows a listed testing charge of ₹30,000 excluding taxes for Whirlpool Baths and Whirlpool Spas under the relevant laboratory scope.
Another BIS testing-charge document lists Whirlpool Baths and Whirlpool Spas at ₹45,000 for the indicated laboratory/product scope.
Therefore, laboratory charges can vary depending on:
- Laboratory
- Test scope
- Product construction
- Applicable requirements
- Additional testing
- Product variants
The actual testing cost should be confirmed with the selected BIS-recognized laboratory before sample submission.
Factory Requirements
Manufacturers should have appropriate facilities for:
- Appliance assembly
- Electrical wiring
- Pump installation
- Heating-element installation
- Control-system assembly
- Safety-device installation
- Functional testing
- Electrical safety testing
- Inspection
- Final assembly
- Product identification
- Packaging
The exact manufacturing requirements depend on the design and production process.
Testing Equipment
A manufacturer should maintain suitable inspection and testing arrangements.
Depending on the product, this may include equipment for:
- Voltage measurement
- Current measurement
- Power measurement
- Leakage-current testing
- Electric-strength testing
- Insulation testing
- Earthing verification
- Temperature measurement
- Functional testing
- Dimensional inspection
Testing equipment should be appropriately maintained and calibrated where required.
Documents Required
Documents commonly required for BIS certification can include:
- Company registration documents
- Factory address proof
- Factory layout
- Manufacturing process flow
- Machinery list
- Product specifications
- Product drawings
- Circuit diagrams
- Wiring diagrams
- PCB details
- Component details
- Critical component list
- Rating information
- User manual
- Product photographs
- Internal test reports
- Testing equipment list
- Calibration certificates
- Quality-control documents
- Inspection records
- Trademark documents where applicable
- Authorized signatory documents
The exact documents depend on the product design and application scope.
BIS Certification Process
1. Product Assessment
The Whirlpool Bath or Whirlpool Spa is assessed to determine the applicable BIS requirements.
2. Standard Review
Applicable requirements of IS 302 (Part 1):2024 / IEC 60335-1:2020 are identified.
3. Technical Documentation
Drawings, circuit diagrams, specifications and component details are prepared.
4. Factory Assessment
Manufacturing and testing facilities are reviewed.
5. Sample Preparation
Representative production samples are prepared.
6. Laboratory Testing
Samples are submitted to the appropriate BIS-recognized laboratory.
7. Test Report
The laboratory prepares the applicable test report.
8. BIS Application
The manufacturer submits the certification application with the required documents.
9. BIS Scrutiny
BIS reviews the application and supporting information.
10. Factory Inspection
The manufacturing facility is assessed as applicable.
11. Observation Closure
Any observations or non-conformities are addressed.
12. Licence Grant
After successful completion of applicable requirements, the BIS licence can be granted.
13. Standard Mark
The manufacturer uses the BIS Standard Mark according to the licence conditions.
Factory Inspection
During factory assessment, BIS may review:
Manufacturing Process
Whether the appliance is manufactured according to the submitted specifications.
Electrical Assembly
Inspection of wiring, connections and electrical components.
Safety Components
Verification of applicable protective devices.
Testing Facilities
Availability of appropriate inspection and testing equipment.
Calibration
Verification of calibration records.
Quality Control
Review of incoming, in-process and finished-product inspection.
Traceability
Checking model, batch and production records.
Product Marking
Verification of required product information.
User Instructions
Checking availability and adequacy of product instructions.
Product Grouping
Product grouping is important when a manufacturer has multiple models or variants.
Different Whirlpool Baths and Whirlpool Spas may differ in:
- Rated voltage
- Rated power
- Heating capacity
- Pump configuration
- Number of jets
- Control system
- Motor type
- Installation method
- Electrical construction
The applicable grouping should be determined based on the actual product design and BIS grouping requirements.
The current BIS Product Manual refers applicants to Annex A1 for grouping guidelines.
Manufacturers should not assume that one tested model automatically covers every model.
Who Needs BIS Certification?
The applicable certification requirements can affect manufacturers of:
- Whirlpool Baths
- Whirlpool Spas
- Electrically operated spa systems
- Electrically heated whirlpool systems
- Pump-operated whirlpool systems
- Similar covered electrical appliances
Manufacturers supplying these products in India should determine whether their specific product falls within the applicable BIS/QCO scope.
Eligibility Requirements
A manufacturer should generally have:
- Manufacturing premises
- Suitable assembly facilities
- Electrical testing arrangements
- Product drawings
- Circuit diagrams
- Quality-control procedures
- Inspection equipment
- Testing equipment
- Calibration arrangements
- Raw-material/component control
- Production records
- Finished-product inspection
- Product identification system
Common Reasons for Certification Delays
Manufacturers may face delays because of:
- Incorrect product classification
- Incomplete technical documentation
- Incorrect circuit diagrams
- Missing component information
- Inadequate electrical safety testing
- Leakage-current test failure
- Electric-strength test failure
- Heating test failure
- Earthing problems
- Incorrect creepage/clearance distances
- Inadequate moisture protection
- Incorrect markings
- Incomplete user instructions
- Missing calibration records
- Factory not ready for inspection
- Incomplete quality-control records
Proper technical preparation before application can help reduce unnecessary delays.
BIS Certification Cost
The total certification cost depends on:
- BIS application charges
- Laboratory testing
- Number of models
- Product grouping
- Factory inspection
- Sample transportation
- Retesting
- Testing equipment
- Documentation
- Consultancy charges
Laboratory charges alone can vary. Current BIS LIMS information shows a listed ₹30,000 excluding taxes testing charge for one Whirlpool Baths and Whirlpool Spas scope, while another BIS listing shows ₹45,000 for the indicated scope.
The final cost should therefore be calculated after reviewing the exact product models and technical specifications.
Certification Timeline
The timeline depends on:
- Technical-document readiness
- Factory readiness
- Sample availability
- Laboratory schedule
- Testing
- BIS application scrutiny
- Factory inspection
- Observation closure
- Test-report evaluation
A product-specific timeline can be estimated after reviewing the manufacturer's product and factory details.
Benefits of BIS Certification
Regulatory Compliance
Helps manufacturers comply with applicable Indian requirements.
Electrical Safety
Testing helps identify potential electrical and construction-related safety issues.
Customer Confidence
BIS certification provides confidence regarding conformity with the applicable standard.
Market Acceptance
Certification supports supply where BIS compliance is required.
Product Quality
The process encourages systematic production and inspection.
Better Manufacturing Control
Documented testing and inspection help maintain consistent product quality.
Business Credibility
Certification can strengthen confidence among distributors, dealers and institutional customers.
Why Choose Qualitance India?
Qualitance India provides BIS certification consultancy for manufacturers of electrical appliances and other products covered by Indian Standards.
For Whirlpool Baths and Whirlpool Spas as per IS 302 (Part 1):2024 / IEC 60335-1:2020, assistance can include:
- Product applicability assessment
- Standard requirement review
- Technical-document review
- Product grouping guidance
- Component assessment
- Laboratory coordination
- Sample preparation guidance
- BIS application assistance
- Factory inspection preparation
- Quality-control documentation
- Test report coordination
- Observation closure assistance
- BIS licence support
Qualitance India
Phone: +91-9310-615-170
Email: info@qualitanceindia.com
Website: https://qualitanceindia.com/
BIS Certification Process
Product Identification
↓
IS 302 (Part 1):2024 Requirement Review
↓
Technical Documentation
↓
Product Grouping
↓
Sample Preparation
↓
Laboratory Testing
↓
BIS Application
↓
BIS Scrutiny
↓
Factory Inspection
↓
Test Report Evaluation
↓
Observation Closure
↓
BIS Licence
↓
Standard Mark Compliance
Frequently Asked Questions
1. What is the standard for Whirlpool Baths and Whirlpool Spas?
The applicable general safety standard is IS 302 (Part 1):2024 / IEC 60335-1:2020. BIS specifically lists Whirlpool Baths and Whirlpool Spas under the relevant electrical appliance product categories.
2. What does IS 302 Part 1:2024 cover?
It provides general safety requirements for household and similar electrical appliances.
3. Is Whirlpool Spa BIS certification required?
Whirlpool Baths and Whirlpool Spas are included in BIS's current Scheme-I product list. Manufacturers should verify the applicable QCO and product scope for their specific model.
4. What is IEC 60335-1:2020?
IEC 60335-1:2020 is the corresponding international standard for general safety requirements of household and similar electrical appliances. BIS identifies it as the identical standard under dual numbering with IS 302 Part 1:2024.
5. What tests are performed on Whirlpool Spas?
Testing can include electrical safety, heating, leakage current, electric strength, mechanical safety, construction, marking and other applicable requirements.
6. Is leakage-current testing required?
Leakage-current testing is among the electrical safety tests identified in BIS laboratory information for the IS 302 Part 1 framework.
7. Is electric-strength testing required?
Yes, electric-strength testing is among the applicable safety evaluations.
8. Is heating testing required?
Yes. BIS laboratory information identifies heating and temperature-related testing under the applicable IS 302 Part 1 testing framework.
9. What documents are required?
Documents can include circuit diagrams, product drawings, component details, specifications, factory documents, testing information and quality-control records.
10. Is factory inspection required?
Factory assessment can form part of the applicable BIS certification process under Scheme-I.
11. What is the laboratory testing cost?
Current BIS LIMS information lists ₹30,000 excluding taxes for one Whirlpool Baths and Whirlpool Spas testing scope. Another current listing shows ₹45,000 for the indicated scope.
12. Can multiple Whirlpool Spa models be included in one licence?
The possibility depends on the applicable product grouping, construction, ratings and technical similarities between models.
13. Are pumps and motors important during certification?
Yes. Pumps, motors and other electrical components can affect the applicable safety evaluation.
14. Are heating elements tested?
Where the appliance incorporates electrical heating, the applicable heating and safety requirements need to be assessed.
15. Is earthing checked?
Where applicable, earthing and protection against electric shock form part of the electrical safety evaluation.
16. Are user instructions required?
Yes. Appropriate marking and instructions are part of the applicable safety requirements.
17. Can imported Whirlpool Spas be covered?
The applicable BIS requirements depend on the product, manufacturer and regulatory framework. Importers should verify the requirements before importing or selling the product.
18. What is the current version of IS 302 Part 1?
The current standard is IS 302 (Part 1):2024 / IEC 60335-1:2020, seventh revision.
19. Does BIS have a Product Manual for this standard?
Yes. BIS has published a Product Manual for IS 302 (Part 1):2024 / IEC 60335-1:2020, including certification-related guidance.
20. Can Qualitance India help with Whirlpool Spa BIS certification?
Yes. Qualitance India can assist with applicability assessment, documentation, testing coordination, BIS application and factory inspection preparation.
People Also Ask
Is BIS certification mandatory for Whirlpool Spas in India?
Whirlpool Baths and Whirlpool Spas are listed by BIS under the applicable Scheme-I electrical appliance framework. The exact mandatory requirement should be verified against the latest QCO and the specific product.
What is IS 302 Part 1 2024?
It is the Indian Standard for general safety requirements of household and similar electrical appliances and is aligned with IEC 60335-1:2020.
What tests are required for Whirlpool Baths?
Tests can cover electrical safety, heating, leakage current, electric strength, construction, mechanical safety, marking and other applicable requirements.
What is the BIS testing cost for Whirlpool Spas?
Current BIS laboratory listings show different charges depending on the laboratory and scope, including ₹30,000 and ₹45,000 excluding applicable taxes.
Can a Whirlpool Bath manufacturer obtain a BIS licence?
Yes, manufacturers whose products fall within the applicable BIS/QCO scope can apply through the relevant BIS certification process.
Website Image Text
WHIRLPOOL BATHS & WHIRLPOOL SPAS
IS 302 (PART 1):2024
IEC 60335-1:2020
BIS CERTIFICATION CONSULTANCY
Qualitance India
+91-9310-615-170
info@qualitanceindia.com
qualitanceindia.com
Image ALT Text
- BIS Certification for Whirlpool Baths
- BIS Certification for Whirlpool Spas
- Whirlpool Bath IS 302 Part 1:2024
- Whirlpool Spa IEC 60335-1:2020
- BIS Licence for Whirlpool Spa
- Whirlpool Bath Testing for BIS Certification
- Whirlpool Spa Electrical Safety Testing
- Whirlpool Spa BIS Certification India
- Whirlpool Bath ISI Mark Certification
- BIS Certification for Electrical Appliances
- Whirlpool Spa Laboratory Testing
- Whirlpool Bath Manufacturer BIS Licence
- IS 302 Part 1:2024 BIS Certification
- Whirlpool Spa Safety Testing
- Qualitance India Whirlpool Spa Certification
Related Services
- BIS Certification Consultancy
- BIS Certification for Electrical Appliances
- BIS Licence for Household Electrical Appliances
- BIS Product Testing
- BIS Factory Inspection
- ISI Mark Certification
- BIS Certification for Electric Appliances
- BIS Certification under IS 302 Part 1
- Electrical Safety Testing
- BIS Certification for Spa Equipment
Related Topics for Your Website
- BIS Certification for Fabric Steamers – IS 302 Part 1:2024
- BIS Certification for Sauna Heating Appliances – IS 302 Part 1:2024
- BIS Certification for Oral Hygiene Appliances – IS 302 Part 1:2024
- BIS Certification for Electrical Appliances for Aquariums and Garden Ponds
- BIS Certification for Surface-Cleaning Appliances
- BIS Certification for Commercial Electric Dishwashing Machines
- BIS Certification for Clothes Dryers and Towel Rails
- BIS Certification for Vaporizers
- BIS Certification for Air-Cleaning Appliances
- BIS Certification for Household and Similar Electrical Appliances
Need BIS Certification for Whirlpool Baths and Whirlpool Spas?
If you manufacture Whirlpool Baths or Whirlpool Spas and require assistance with IS 302 (Part 1):2024 / IEC 60335-1:2020, Qualitance India can assist with product assessment, technical documentation, laboratory testing, BIS application and factory inspection preparation.
Qualitance India
Phone: +91-9310-615-170
Email: info@qualitanceindia.com
Website: https://qualitanceindia.com/
Contact our team to discuss your BIS certification requirement for Whirlpool Baths and Whirlpool Spas.
Conclusion
Whirlpool Baths and Whirlpool Spas combine water systems with electrical components such as pumps, motors, heaters, controllers and safety devices. Proper evaluation of electrical and construction safety is therefore essential.
IS 302 (Part 1):2024 / IEC 60335-1:2020 provides the general safety requirements applicable to household and similar electrical appliances, while BIS specifically lists Whirlpool Baths and Whirlpool Spas under its current Scheme-I product framework.
Manufacturers should carefully review their product construction, technical documentation, components, testing requirements, product grouping and factory quality-control arrangements before applying for certification.
Qualitance India can assist manufacturers throughout the BIS certification process for Whirlpool Baths and Whirlpool Spas as per IS 302 (Part 1):2024 / IEC 60335-1:2020.