Blog – Page 28 – Qualitance India

BIS Certification for Indicating Bolts for Use in Public Baths and Lavatories – IS 4621:1975

Introduction Indicating bolts are specially designed door-locking mechanisms used in public baths and lavatories to indicate whether a toilet or washroom is occupied or vacant. These bolts are commonly found on doors in places such as public washrooms, railway coaches, aircraft, malls, commercial buildings and other high-traffic facilities. IS 4621:1975 specifies requirements for indicating bolts […]

BIS Certification for Marine Plywood as per IS 710:2010 (ISI)

Introduction Marine plywood is a specially manufactured plywood product designed for applications where the material may be exposed to moisture, humidity, wet conditions and demanding environments. IS 710:2010 – Marine Plywood – Specification was the Indian Standard specifying requirements for materials, manufacture and performance of marine plywood intended for applications such as the construction, repair […]

BIS Certification for Portable Fire Extinguishers as per IS 15683:2018

Introduction Portable fire extinguishers are important safety equipment used for controlling and suppressing fires at an early stage. Because these products are directly related to fire safety, their construction, reliability, performance and safety need to meet defined requirements. IS 15683:2018 – Portable Fire Extinguishers – Performance and Construction – Specification specifies requirements relating to the […]

BIS Certification for Step Bolts for Steel Structures | IS 10238:2001 | BIS Licence

Introduction BIS Certification for Step Bolts for Steel Structures is an important compliance requirement for manufacturers whose products fall under the applicable BIS certification and Quality Control Order framework. IS 10238:2001 is the Indian Standard titled “Fasteners – Threaded Steel Fasteners – Step Bolts for Steel Structures – Specification.” BIS includes this standard under its […]

BIS Certification for Insulated Flask for Domestic Use | IS 17790:2022 | BIS Licence

Introduction BIS Certification for Insulated Flask for Domestic Use is required under the applicable Indian Standard and Quality Control Order framework for products covered by IS 17790:2022. IS 17790:2022 is titled “Insulated Flask for Domestic Use — Specification.” BIS describes the standard as covering minimum requirements for domestic insulated stainless-steel flasks used for storing and […]

BIS Certification for Jute Bags for Packing 50 Kg Foodgrains | IS 12650:2018

Introduction BIS Certification for Jute Bags for Packing 50 Kg Foodgrains is an important regulatory requirement for manufacturers dealing with jute bags covered under IS 12650:2018. The official BIS standard identifies IS 12650:2018 as “Textiles – Jute bags for packing 50 kg foodgrains – Specification (Third Revision)”. BIS’s product-specific information also lists this standard, while […]

BIS Certification for Hand-held Blender | IS 302 (Part 2/Section 14) | Complete Guide

Introduction A Hand-held Blender BIS Certification is an important compliance requirement for manufacturers of hand-held electric kitchen appliances covered under the applicable BIS requirements. The relevant standard is IS 302 (Part 2/Section 14), titled Safety of Household and Similar Electrical Appliances – Part 2: Particular Requirements – Section 14: Electric Kitchen Machines. BIS’s Product Manual […]

BIS Certification for Acetone | IS 170:2004 | Acetone Specification

Introduction Acetone BIS Certification is an important regulatory compliance requirement for manufacturers and suppliers dealing with Acetone covered under the applicable Indian Standard and Quality Control Order. IS 170:2004 specifies requirements for Acetone. BIS’s Product Manual for IS 170:2004 was prepared for certification under Scheme-I of the BIS Conformity Assessment Regulations, 2018. The manual specifies […]

BIS Certification for Butterfly Valves for General Purposes | IS 13095:1991

Introduction BIS Certification for Butterfly Valves is an important compliance consideration for manufacturers whose butterfly valves fall under the applicable BIS certification requirements. IS 13095:1991 is titled “Butterfly Valves for General Purposes.” The standard covers double-flanged and wafer-type butterfly valves, including metal-seated and resilient-seated valves made from materials such as cast iron, ductile iron and […]

BIS Certification for PVC Sandal | IS 6721:1972 | BIS Licence & ISI Mark

Introduction BIS Certification for PVC Sandal is an important regulatory requirement for manufacturers whose products fall within the applicable BIS/QCO framework. IS 6721:1972 is titled “Specification for PVC Sandal.” BIS’s current compulsory-certification listing includes IS 6721:1972 under the footwear certification framework. BIS has also issued clarification regarding the transition to IS 6721:2023 – Sandal and […]