BIS Certification for PVC Sandal

BIS Certification for PVC Sandal | IS 6721:1972 | BIS Licence & ISI Mark

Updated on 31 October 2026 By Qualitance India Compliance Team

Introduction

BIS Certification for PVC Sandal is an important regulatory requirement for manufacturers whose products fall within the applicable BIS/QCO framework. IS 6721:1972 is titled “Specification for PVC Sandal.” BIS’s current compulsory-certification listing includes IS 6721:1972 under the footwear certification framework.

BIS has also issued clarification regarding the transition to IS 6721:2023 – Sandal and Slippers – Specification. For PVC sandals manufactured through injection moulding, BIS’s clarification states that the QCO applies to IS 6721:1972 from 1 July 2023, while sandals made from materials other than PVC or PVC sandals manufactured by processes other than injection moulding fall under the revised IS 6721:2023 framework from 1 January 2024.

Therefore, manufacturers should first determine the material and manufacturing process before selecting the applicable standard and certification route.

About the Product

PVC Sandal is footwear manufactured using polyvinyl chloride (PVC) material and covered by the specifications of IS 6721:1972 where applicable.

PVC sandals are commonly manufactured through injection moulding, producing a moulded footwear product with an integrated or assembled sandal structure.

The applicable product requirements can cover parameters related to:

Hardness
Tensile strength
Elongation at break
Tear strength
Density
Volatility
Lead content
Dimensions
Product construction and applicable requirements

BIS’s current laboratory information for IS 6721:1972 identifies these testing parameters.

What is BIS Certification?

BIS Certification is a conformity assessment system operated by the Bureau of Indian Standards.

For products covered under compulsory certification, manufacturers must demonstrate conformity with the relevant Indian Standard and satisfy BIS requirements before applying the applicable Standard Mark.

PVC Sandal is included in BIS’s current compulsory-certification listing under IS 6721:1972.

What is IS 6721:1972?

IS 6721:1972 is titled:

“Specification for PVC Sandal”

The BIS Product Manual for IS 6721:1972 is intended to guide Regional/Branch Offices, licence holders and prospective applicants regarding certification under Scheme-I.

The Product Manual identifies:

Product title
Product sampling guidelines
Raw-material information
Product grouping guidelines
Sample size
Testing equipment requirements
Certification requirements

For sampling, the Product Manual specifies one pair of sandals, along with test slabs made from the same composition as specified under the relevant clause.

Scope of IS 6721:1972

IS 6721:1972 specifies requirements for PVC Sandal.

The standard is particularly relevant to the applicable category of PVC sandals, including those manufactured by injection moulding, as clarified by BIS.

The product requirements include applicable physical, chemical and dimensional characteristics.

Products Covered

Depending on the applicable regulatory framework, the product category may include:

PVC sandals
Injection-moulded PVC sandals
Moulded PVC footwear falling under the applicable specification
PVC sandal variants covered by IS 6721:1972

Important Standard Applicability

BIS clarified that:

PVC sandal manufactured by injection moulding → IS 6721:1972

while:

PVC sandal manufactured through a process other than injection moulding → IS 6721:2023 framework

and:

Sandals made from materials other than PVC such as TPR/EVA/PU/TPU → IS 6721:2023 framework, subject to the applicable QCO provisions.

Enforcement / Implementation Date

BIS’s 2023 implementation guideline stated that IS 6721:1972 and the revised IS 6721:2023 were concurrently running during the transition period, with 31 December 2023 identified as the last date for implementation of the revised standard.

However, BIS subsequently clarified the applicability based on the material and manufacturing process. For PVC sandals manufactured by injection moulding, IS 6721:1972 continued to be the applicable reference under the relevant QCO clarification.

For a new application, always verify the exact product/process against the latest BIS/QCO position before filing.

Applicable QCO Details

The applicable footwear QCO framework is associated with the Footwear made from All Rubber and all Polymeric Material and its Components (Quality Control) Order and subsequent amendments/clarifications.

BIS’s current compulsory-certification listing includes IS 6721:1972 – PVC Sandal.

BIS clarification dated 27 July 2023 specifically states that the QCO applies to sandals made of PVC and manufactured by injection moulding as per IS 6721:1972 from 1 July 2023.

Who Needs BIS Certification?

BIS certification may be required for eligible manufacturers producing covered PVC sandals, including:

PVC sandal manufacturers
Injection-moulded footwear manufacturers
PVC footwear manufacturers
Moulded footwear manufacturers
Indian manufacturers
Eligible foreign manufacturers supplying the Indian market

BIS’s footwear FAQ also states that the certification framework applies to domestic and foreign manufacturers making footwear for consumers in India.

Eligibility Criteria

A manufacturer should generally have:

Manufacturing premises
Suitable injection-moulding machinery
PVC material handling facilities
Required production equipment
Quality-control arrangements
Testing facilities or testing arrangements
Calibrated measuring equipment
Trained personnel
Production records
Inspection records
Product identification and traceability
Appropriate storage facilities

The actual requirements depend upon the product scope and applicable BIS certification scheme.

Complete BIS Certification Process

Step 1 – Product Assessment

Identify the exact PVC sandal model manufactured by the factory.

Step 2 – Standard Applicability

Determine whether the product falls under IS 6721:1972 or the revised IS 6721:2023 framework.

Step 3 – Manufacturing Process Verification

Confirm whether the PVC sandal is manufactured by injection moulding.

Step 4 – Product Scope Assessment

Identify:

Sizes
Designs
Models
Material composition
Manufacturing process
Product grouping

Step 5 – Factory Assessment

Review machinery, production facilities and quality-control arrangements.

Step 6 – Documentation

Prepare the required BIS documents.

Step 7 – Sample Preparation

Prepare representative samples as per BIS requirements.

Step 8 – Laboratory Testing

Submit samples to an appropriate BIS-recognized laboratory.

Step 9 – BIS Application

Submit the application and required supporting documents.

Step 10 – Application Scrutiny

BIS examines the application and submitted information.

Step 11 – Factory Inspection

BIS assesses the manufacturing premises where applicable.

Step 12 – Observation Closure

Address any non-conformities or observations.

Step 13 – Licence Grant

After satisfactory completion, BIS may grant the licence.

Step 14 – ISI Mark

Use the BIS Standard Mark according to the applicable licence conditions.

Step 15 – Ongoing Compliance

Maintain production and quality-control requirements after certification.

Required Documents

Common documents may include:

Company registration documents
Factory registration
Factory address proof
Factory layout
Manufacturing process flow chart
Machinery list
Product specifications
Product drawings/design details
PVC raw-material details
Quality-control plan
Testing equipment list
Calibration certificates
Internal test reports
Product photographs
Packaging details
Marking details
Trademark documents
Authorized signatory documents
BIS application documents
Declarations and undertakings

The final document list should be confirmed based on the actual BIS application.

Testing Requirements

BIS LIMS currently lists IS 6721 (1972) – Specification for PVC Sandal in its laboratory testing scope.

The listed testing parameters include:

1. Hardness

Hardness of the PVC sandal material is evaluated according to the applicable test method.

2. Tensile Strength

The tensile strength of the relevant material is tested.

3. Density

Density is determined according to the applicable requirement.

4. Elongation at Break

The elongation characteristics of the material are evaluated.

5. Tear Strength

Tear strength is tested to determine resistance to tearing.

6. Volatility

Volatility percentage by mass is tested.

7. Lead Content

Lead content is evaluated as part of the applicable chemical requirements.

8. Dimension

Applicable dimensions of the sandal are checked.

These parameters are reflected in the current BIS LIMS testing information for IS 6721:1972.

BIS Testing Laboratory

BIS LIMS currently lists laboratories with testing scope for IS 6721:1972.

For example, National Test House – ER, Kolkata is listed for IS 6721:1972 with a testing charge shown as ₹11,000 excluding taxes for the listed scope.

Another BIS LIMS listing shows International Testing Centre, MSME Technology Development Centre, Meerut with IS 6721:1972 testing scope.

Testing charges may differ depending upon:

Laboratory
Testing scope
Sample requirements
Additional tests
Current BIS laboratory schedule

Therefore, the latest BIS LIMS listing should be checked before quoting the final testing budget.

BIS Certification Cost

The total cost of BIS certification depends on several factors:

Application charges
Laboratory testing charges
Inspection expenses
Product scope
Number of variants
Testing requirements
Documentation
Retesting, if required
Consultancy charges

For example, BIS LIMS currently shows ₹11,000 excluding taxes for one listed IS 6721:1972 laboratory scope, but this should not be treated as the complete BIS certification cost.

Factory Inspection Process

During factory inspection, BIS may review:

Manufacturing Machinery

Injection moulding machines and related production equipment.

Raw Materials

PVC/raw-material control and identification.

Manufacturing Process

Production process and process controls.

Product Quality

Finished sandals are checked against applicable requirements.

Testing Facilities

Availability and suitability of required testing arrangements.

Calibration

Calibration records of measuring instruments.

Quality Records

Production, inspection and test records.

Product Marking

Marking and packaging arrangements according to applicable requirements.

Common Reasons for Application Rejection or Delay

Incorrect standard selected
Wrong manufacturing process declared
Product falls under another standard
Incomplete documentation
Failed laboratory test
Excessive variation in dimensions
Failure in tensile strength
Failure in hardness
Failure in elongation
Excessive volatility
Lead-content non-conformity
Inadequate testing facilities
Expired calibration
Incomplete factory records
Incorrect product marking
Failure to close BIS observations

Timeline

The BIS certification timeline depends on:

Product readiness
Documentation
Sample availability
Laboratory availability
Testing results
BIS scrutiny
Factory inspection
Observation closure

Therefore, manufacturers should avoid promising a fixed certification timeline before evaluating the complete application.

Benefits of BIS Certification

Regulatory Compliance

Helps manufacturers comply with applicable mandatory BIS requirements.

Product Quality

Provides a structured framework for quality evaluation.

Customer Confidence

Builds trust among distributors, retailers and consumers.

Market Access

Supports compliant supply of regulated footwear products.

Brand Credibility

BIS certification strengthens product credibility.

Quality Control

Encourages systematic testing and manufacturing controls.

Why Choose Qualitance India?

Qualitance India provides end-to-end BIS Certification Consultancy for PVC Sandal manufacturers.

Our Services Include:

✓ BIS Applicability Assessment
✓ IS 6721 Standard Assessment
✓ Product Scope Assessment
✓ Documentation Support
✓ Testing Laboratory Coordination
✓ Sample Preparation Guidance
✓ BIS Application Assistance
✓ Factory Inspection Preparation
✓ Quality-Control Documentation
✓ Observation Closure Support
✓ ISI Mark Guidance
✓ End-to-End BIS Certification Support

Contact Qualitance India

Phone: +91-9310-615-170
Email: info@qualitanceindia.com
Website: qualitanceindia.com

QUALITANCE INDIA – IMPROVING QUALITY AND COMPETENCE

Step-by-Step Flow Chart

PVC Sandal Product Identification
↓
Material & Manufacturing Process Verification
↓
IS 6721:1972 / IS 6721:2023 Applicability Check
↓
Product Scope Assessment
↓
Factory Readiness Assessment
↓
Documentation Preparation
↓
Sample Preparation
↓
Laboratory Testing
↓
BIS Application Submission
↓
Application Scrutiny
↓
Factory Inspection
↓
Observation Closure
↓
BIS Licence Grant
↓
ISI Mark Compliance
↓
Ongoing BIS Compliance

25 SEO FAQs

1. What is BIS Certification for PVC Sandal?

BIS Certification is the conformity assessment required for PVC sandals covered under the applicable BIS/QCO framework.

2. What is IS 6721:1972?

IS 6721:1972 is the Indian Standard titled Specification for PVC Sandal.

3. Is BIS Certification mandatory for PVC Sandal?

PVC sandals covered by the applicable compulsory-certification/QCO framework require BIS certification. BIS’s current compulsory-certification list includes IS 6721:1972.

4. What is the applicable standard for PVC sandals?

The applicable standard depends on the material and manufacturing process. BIS has specifically clarified the applicability of IS 6721:1972 for PVC sandals manufactured through injection moulding.

5. Is IS 6721:1972 still applicable?

Yes, BIS’s current compulsory-certification listing continues to list IS 6721:1972, while the applicability must be assessed according to the latest BIS/QCO clarification.

6. What is IS 6721:2023?

IS 6721:2023 is the revised standard titled Sandal and Slippers – Specification, which amalgamated the earlier IS 6721:1972 and IS 11544:1986 standards.

7. Which PVC sandals come under IS 6721:1972?

BIS clarified that PVC sandals manufactured by injection moulding come under IS 6721:1972 under the applicable QCO framework.

8. What tests are required for PVC sandals?

Testing can include hardness, tensile strength, density, elongation at break, tear strength, volatility, lead content and dimensions.

9. Is hardness tested for PVC sandals?

Yes. Hardness is included in the BIS LIMS testing scope for IS 6721:1972.

10. Is tensile strength tested?

Yes. Tensile strength is one of the listed testing parameters.

11. Is lead content tested?

Yes. Lead content is included in the listed testing scope for IS 6721:1972.

12. Is dimension testing required?

Yes. Dimension is included in the BIS testing scope.

13. What documents are required for BIS Certification?

Documents generally include factory details, manufacturing process, machinery, product information, testing facilities, calibration records and quality-control documents.

14. Is factory inspection required?

Factory assessment may form part of the BIS certification process depending on the applicable certification procedure.

15. How much does PVC Sandal BIS testing cost?

BIS LIMS currently shows a listed testing charge of ₹11,000 excluding taxes for one National Test House – ER, Kolkata scope for IS 6721:1972.

16. Is ₹11,000 the complete BIS certification cost?

No. Laboratory testing is only one component. Application, inspection, documentation and other charges may also apply.

17. Can foreign manufacturers obtain BIS Certification?

Yes, eligible foreign manufacturers can obtain BIS certification under the applicable BIS foreign-manufacturer framework. BIS’s footwear FAQ covers both domestic and foreign manufacturers.

18. Can one BIS licence cover multiple factories?

BIS states that certification is granted to a manufacturing premises, not merely to the company. Separate certification is therefore required for each applicable manufacturing premises.

19. What is the BIS Standard Mark?

The BIS Standard Mark indicates conformity with the applicable Indian Standard under the conditions of the BIS licence.

20. What is the PVC Sandal QCO?

It is the applicable Quality Control Order framework regulating covered footwear products and their conformity with specified Indian Standards.

21. What is the BIS certification process for PVC sandals?

It generally includes product assessment, standard applicability, documentation, testing, application, factory assessment, observation closure and licence grant.

22. How long does BIS certification take?

The timeline depends on documentation, testing, factory readiness, BIS scrutiny and inspection scheduling.

23. What happens if the sample fails testing?

The manufacturer may need to investigate the non-conformity and follow the applicable BIS procedure for corrective action/retesting.

24. Can Qualitance India help with IS 6721 certification?

Yes. Qualitance India can support product assessment, documentation, testing coordination, BIS application and factory inspection preparation.

25. Why is standard applicability important for PVC sandals?

Because BIS has different applicability based on factors such as material and manufacturing process. Incorrectly selecting IS 6721:1972 instead of the applicable revised standard can create compliance problems.

FAQ Schema Content

Use these questions in the website FAQ section:

What is BIS Certification for PVC Sandal?
What is IS 6721:1972?
Is BIS Certification mandatory for PVC Sandal?
Which PVC sandals come under IS 6721:1972?
What is IS 6721:2023?
What tests are required for PVC Sandal?
Is lead content tested?
Is tensile strength tested?
What documents are required?
Is factory inspection required?
What is the BIS testing cost?
Can foreign manufacturers obtain BIS Certification?
Can multiple factories use one BIS licence?
How long does BIS Certification take?
How can Qualitance India help?

Service Schema Suggestion

Service Name: BIS Certification Consultancy for PVC Sandal

Service Type: BIS Certification Consultancy

Applicable Standard: IS 6721:1972

Product: PVC Sandal

Provider: Qualitance India

Area Served: India

Description: End-to-end BIS Certification Consultancy for applicable PVC Sandals under IS 6721:1972, including applicability assessment, documentation, testing coordination, BIS application and factory inspection support.

Organization Schema Suggestion

Organization Name: Qualitance India

Tagline: Improving Quality and Competence

Phone: +91-9310-615-170

Email: info@qualitanceindia.com

Website: qualitanceindia.com

Breadcrumb Schema Suggestion

Home → BIS Certification → Footwear Certification → PVC Sandal → IS 6721:1972

Article Schema Suggestion

Article Type: Article / BlogPosting

Headline: BIS Certification for PVC Sandal – IS 6721:1972

Author: Qualitance India

Publisher: Qualitance India

Article Section: BIS Certification / Footwear Certification

Keywords: BIS Certification for PVC Sandal, IS 6721:1972, PVC Sandal BIS Licence, PVC Footwear Certification

Internal Linking Strategy

Is page ko website ke related pages se internally link karein:

BIS Certification Consultancy
BIS Certification Process
BIS Certification Cost
BIS Certification Documents
BIS Product Testing
BIS Factory Inspection
ISI Mark Certification
Footwear BIS Certification
QCO Compliance Consultancy
Foreign Manufacturer BIS Certification
BIS Certification for Sports Footwear
BIS Certification for Rubber Footwear

Recommended Anchor Text

BIS Certification Process
BIS Certification Cost
BIS Testing Services
BIS Factory Inspection
ISI Mark Certification
Footwear BIS Certification
QCO Compliance
BIS Certification for PVC Footwear
BIS Certification for Sandal Manufacturers

External Authority References

For authority and E-E-A-T, official BIS sources link karein:

Related BIS Services

BIS Certification for PVC Sandal
BIS Certification for Sandal and Slippers
BIS Certification for Sports Footwear
BIS Certification for PVC Footwear
BIS Certification for Rubber Footwear
BIS Certification for Polymeric Footwear
BIS Product Testing
BIS Factory Inspection Assistance
BIS Documentation Support
ISI Mark Certification
QCO Compliance Consultancy
Foreign Manufacturer BIS Certification

Related Blog Suggestions

BIS Certification for PVC Sandal – Complete Guide
IS 6721:1972 – Complete BIS Certification Process
IS 6721:2023 vs IS 6721:1972 – Complete Difference
BIS Certification for Sandal and Slipper Manufacturers
PVC Sandal Testing Requirements as per IS 6721
Documents Required for PVC Sandal BIS Certification
BIS Certification Cost for PVC Sandal
BIS Testing Laboratory for PVC Sandal
Footwear QCO in India – Complete Guide
BIS Certification for Polymeric Footwear
BIS Certification for Sports Footwear
BIS Certification for Rubber Hawai Chappal
BIS Certification for PVC Industrial Boots
BIS Certification for Moulded Plastic Footwear
Latest BIS Footwear Standards and QCO Guide

Need BIS Certification for PVC Sandal?

Are you a PVC Sandal Manufacturer, Footwear Manufacturer, Injection Moulding Manufacturer or Footwear Exporter looking for BIS Certification?

Qualitance India can help you with complete BIS Certification consultancy.

Our Support Includes:

✓ Product & Standard Applicability Assessment
✓ IS 6721:1972 Assessment
✓ Documentation Support
✓ Testing Laboratory Coordination
✓ Sample Preparation Guidance
✓ BIS Application Assistance
✓ Factory Inspection Preparation
✓ Quality-Control Documentation
✓ Technical Observation Support
✓ ISI Mark Guidance
✓ End-to-End BIS Certification Support

Contact Us

📞 +91-9310-615-170
📧 info@qualitanceindia.com
🌐 qualitanceindia.com

QUALITANCE INDIA – IMPROVING QUALITY AND COMPETENCE

Conclusion

BIS Certification for PVC Sandal as per IS 6721:1972 is an important compliance requirement for the applicable category of PVC sandals. BIS’s current compulsory-certification listing includes IS 6721:1972 – PVC Sandal, while BIS has issued specific clarification regarding its applicability based on the manufacturing process and material.

For PVC sandals manufactured through injection moulding, BIS has specifically clarified applicability under IS 6721:1972. Manufacturers should nevertheless verify the latest QCO and BIS requirements before submitting a fresh application.

The certification process can involve product assessment, documentation, laboratory testing, BIS application, factory inspection, observation closure and licence grant. BIS LIMS currently lists testing parameters including hardness, tensile strength, density, elongation at break, tear strength, volatility, lead content and dimensions.

If you need professional assistance for PVC Sandal BIS Certification, IS 6721 applicability assessment, documentation, testing coordination or factory inspection preparation, Qualitance India can provide end-to-end consultancy support.

Need help with BIS certification for this product?

Get a free consultation from our compliance experts — we handle testing, documentation and the complete BIS process for you.

Get Free Consultation WhatsApp Us +91 93106 15170

Free PDF Download

BIS Certification Readiness Checklist 2026

Documents, testing & factory requirements in one place
Covers ISI Mark, CRS, FMCS & Hallmarking
Tick-box format — share it with your team