Introduction

Appliances for Skin Exposure to Optical Radiation are electrical appliances designed to expose the user's skin to optical radiation generated, emitted, reflected or transmitted by the appliance. These products may use technologies involving UV, visible light, infrared or other optical radiation sources for applications related to beauty, wellness, skincare or similar purposes.

The Bureau of Indian Standards (BIS) has included Appliances for Skin Exposure to Optical Radiation in the illustrative product list associated with IS 302 (Part 1):2024 | IEC 60335-1:2020 under the regulatory framework for the safety of household, commercial and similar electrical appliances. The official BIS Scheme-I information lists this category under the IS 302 (Part 1):2024 framework.

For manufacturers, importers and businesses dealing in these products, understanding the applicable BIS certification requirements is essential for regulatory planning and market access in India.

Qualitance India provides professional BIS Certification Consultancy for Appliances for Skin Exposure to Optical Radiation, assisting businesses with product applicability assessment, technical documentation, laboratory testing coordination, BIS application support and certification-related compliance.

Implementation Date: 01 August 2026

Important Regulatory Note: The date provided for this service page is 01 August 2026, as specified in your brief. However, the current BIS "Upcoming QCOs" page lists the broader IS 302 (Part 1):2024 electrical-appliance category with a 01 October 2026 implementation date for the general category. It is therefore advisable to verify the exact product-specific transition provision before publishing the date as a definitive legal deadline.

About Appliances for Skin Exposure to Optical Radiation

Appliances for Skin Exposure to Optical Radiation are electrical products that use an optical radiation source to expose the skin to controlled radiation.

Depending on the product design and intended application, these appliances may use:

UV radiation
Visible light
LED light
Infrared radiation
Other optical radiation sources

These products may be used in:

Beauty salons
Skin-care clinics
Wellness centres
Dermatology-related environments
Personal-care applications
Household environments
Commercial establishments

The exact applicability of BIS certification depends on the product's design, intended use, electrical characteristics, radiation source and applicable regulatory requirements.

Manufacturers should therefore complete a product-specific compliance assessment rather than assuming that every light-based or optical device falls under the same certification category.

What is BIS Certification for Appliances for Skin Exposure to Optical Radiation?

BIS Certification is a conformity assessment mechanism administered by the Bureau of Indian Standards (BIS).

For products covered by a mandatory Quality Control Order, manufacturers are required to demonstrate conformity with applicable Indian Standards and fulfill the prescribed BIS certification requirements before the product can be legally placed on the Indian market.

The BIS official Scheme-I page lists Appliances for Skin Exposure to Optical Radiation within the illustrative product categories associated with IS 302 (Part 1):2024 | IEC 60335-1:2020.

For businesses dealing with optical-radiation skin appliances, BIS compliance may involve:

Product applicability assessment
Applicable standard review
Technical documentation
Product testing
BIS application
Factory inspection, where applicable
Quality-control verification
Grant of BIS licence
Compliance with applicable ISI Mark requirements

Applicable Standard: IS 302 (Part 1):2024 | IEC 60335-1:2020

The general standard applicable to the listed product category is:

IS 302 (Part 1):2024 | IEC 60335-1:2020

The standard is titled:

Household and Similar Electrical Appliances — Safety — Part 1: General Requirements

The BIS official Scheme-I listing identifies IS 302 (Part 1):2024 with IEC 60335-1:2020 and includes Appliances for Skin Exposure to Optical Radiation in its illustrative product list.

The general safety requirements may address areas including:

Protection against electric shock
Marking and instructions
Protection against access to live parts
Power input and current
Temperature rise
Leakage current
Electric strength
Moisture resistance
Abnormal operation
Mechanical strength
Construction
Internal wiring
External flexible cords
Earthing
Creepage distances
Clearances
Resistance to heat and fire
Components
Endurance
Radiation-related safety considerations, where applicable

For appliances that expose the skin to optical radiation, additional attention should be given to the nature of the radiation source and the product's intended operation.

Scope of BIS Certification for Appliances for Skin Exposure to Optical Radiation

The compliance assessment for these products may involve evaluation of the complete appliance, including:

Electrical input
Rated voltage
Rated power
Optical radiation source
Light-emitting components
UV source, where applicable
LED source, where applicable
Infrared source, where applicable
Control system
Timers
Sensors
Safety interlocks
Protective shields
Enclosures
Electrical insulation
Temperature control
User instructions
Warning labels
Product construction

The exact compliance scope should always be determined based on the actual technical construction and intended application of the product.

Products That May Fall Under This Category

Depending on their design and intended use, the following types of products may require assessment:

UV Skin Exposure Appliances

Devices designed to expose the skin to UV radiation for specific applications.

Light-Based Skin Treatment Appliances

Electrical appliances using controlled light sources for skin-related applications.

LED-Based Skin Appliances

Devices using LED light sources for beauty or skincare-related applications.

Infrared Skin Exposure Appliances

Products using infrared radiation for applicable personal-care or wellness purposes.

Phototherapy-Type Appliances

Light-based devices intended for controlled exposure of the skin.

Beauty and Skin Treatment Light Appliances

Electrical appliances using optical radiation for beauty or skincare applications.

Other Similar Optical Radiation Appliances

Products with comparable functionality may also require evaluation depending on their construction and regulatory classification.

Important: Products marketed as medical devices may also be subject to separate regulatory requirements administered by the relevant authorities. BIS applicability should not be treated as a substitute for any separate medical-device or healthcare regulatory approval that may apply.

Implementation Date: 01 August 2026

The implementation date specified for this service page is:

01 August 2026

Manufacturers, importers and businesses dealing with applicable Appliances for Skin Exposure to Optical Radiation should begin their compliance planning in advance.

However, the latest official BIS upcoming-QCO information currently lists the broader IS 302 (Part 1):2024 | IEC 60335-1:2020 electrical-appliance category with an implementation date of 01 October 2026 for the general category. Therefore, businesses should verify the latest applicable QCO, amendments and transition provisions before relying on 01 August 2026 as a statutory deadline.

This distinction is important for accurate regulatory communication and should be reviewed before final publication.

Applicable QCO Details

The relevant regulatory framework is associated with the:

Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order

The BIS official Scheme-I page currently references the 2024, 2025 and 2026 QCO framework for electrical appliances under IS 302 (Part 1):2024. The official list specifically includes Appliances for Skin Exposure to Optical Radiation among the illustrative products.

The broader category covers applicable electrical appliances intended for household, commercial or similar applications within the specified voltage limits, including applicable DC-supplied and battery-operated appliances.

Businesses should verify:

Latest QCO notification
Amendments
Transition provisions
Enterprise category
Exemptions, if applicable
Product-specific applicability

before manufacturing, importing or selling covered products in India.

Who Needs BIS Certification?

BIS compliance may be relevant to:

Indian manufacturers
Foreign manufacturers
Overseas exporters supplying India
Importers
OEM manufacturers
ODM manufacturers
Private-label brands
Beauty equipment manufacturers
Skin-care appliance manufacturers
Light-based appliance manufacturers
Optical radiation appliance manufacturers
Beauty salon equipment suppliers

Where mandatory BIS certification applies, the manufacturer must complete the applicable certification process before commercial market placement.

Eligibility Criteria for BIS Certification

A manufacturer seeking applicable BIS certification should generally have:

Clearly identified manufacturing premises
Suitable production infrastructure
Quality-control procedures
Required testing facilities
Technical personnel
Product samples
Product specifications
Circuit diagrams
Technical drawings
Bill of Materials
Optical radiation source details
Control-system details
Product labels
User instructions

Foreign manufacturers may have additional requirements depending on the applicable BIS certification route.

Complete BIS Certification Process

Step 1: Product Applicability Assessment

First, determine whether the product qualifies as an Appliance for Skin Exposure to Optical Radiation under the applicable BIS framework.

The assessment may consider:

Product function
Intended use
Radiation source
Rated voltage
Rated power
AC/DC operation
Battery operation
Product construction
User exposure
Commercial or household application

Step 2: Standard Identification

The applicable general standard is:

IS 302 (Part 1):2024 | IEC 60335-1:2020

Any relevant product-specific requirements must also be considered where applicable.

Step 3: Technical Documentation

The manufacturer should prepare:

Product specification
Technical datasheet
Circuit diagram
Wiring diagram
Product drawings
Bill of Materials
Optical source details
LED/UV/infrared source specifications
Control system details
Safety interlock details
Timer details
Product photographs
Rating label
User manual
Manufacturing process flow
Quality-control plan

Step 4: Sample Preparation

Representative samples should be prepared for applicable testing.

The samples should match the product models and technical specifications submitted during the certification process.

Step 5: Laboratory Testing

The product may undergo applicable safety and performance testing.

Testing may consider:

Protection against electric shock
Power input
Current
Temperature rise
Leakage current
Electric strength
Insulation
Moisture resistance
Abnormal operation
Mechanical strength
Construction
Internal wiring
External flexible cords
Earthing
Creepage and clearance
Heat and fire resistance
Applicable optical-radiation safety requirements

The exact test plan depends on the product design and applicable testing requirements.

BIS laboratory scope information lists Appliances for Skin Exposure to Optical Radiation as a product category under the IS 302 (Part 1):2024 testing framework.

Step 6: BIS Application

The manufacturer submits the applicable BIS application with:

Manufacturer details
Factory information
Product details
Brand details
Model information
Technical documentation
Test reports
Quality-control information

Step 7: Factory Inspection

Where required, BIS may inspect the manufacturing facility.

The inspection may verify:

Production facilities
Manufacturing process
Quality-control system
Testing facilities
Calibration records
Raw-material inspection
In-process inspection
Final product testing

Step 8: Technical Evaluation

BIS may review the submitted documentation, laboratory reports and inspection findings.

If observations are raised, the manufacturer may need to provide clarification or corrective action.

Step 9: Grant of BIS Licence

After successful completion of the applicable requirements, BIS may grant the licence to the eligible manufacturer.

The manufacturer must then follow the applicable requirements for using the BIS Standard Mark.

Step 10: Ongoing Compliance

After certification, manufacturers should maintain:

Consistent product quality
Approved production processes
Quality-control records
Routine testing
Calibration
Correct marking
Technical documentation
Applicable surveillance compliance

Any changes to the optical radiation source, LED modules, UV source, infrared source, controller, power supply or critical safety components should be evaluated for their impact on certification.

Required Documents

Common documents may include:

Company registration documents
Factory registration details
Factory address proof
Factory layout
Manufacturing process flow chart
Product technical specifications
Product datasheet
Circuit diagram
Wiring diagram
Product photographs
Rating label artwork
Bill of Materials
Optical radiation source specifications
LED/UV/infrared source details
Control-system details
Safety interlock details
Timer specifications
User manual
Quality-control plan
Testing equipment list
Calibration certificates
In-house test records
Authorized signatory details
Trademark or brand authorization documents, where applicable

The final document list may vary according to the product and BIS certification procedure.

Testing Requirements

Appliances for Skin Exposure to Optical Radiation require careful compliance evaluation because the product intentionally exposes the user's skin to optical radiation.

Electrical Safety Testing

The appliance should provide appropriate protection against electric shock during normal and foreseeable use.

Temperature Rise

Relevant components and accessible surfaces may need to be assessed for safe operating temperatures.

Leakage Current

Applicable leakage current testing may be conducted to evaluate electrical safety.

Electric Strength

Electric strength testing may be required to verify insulation integrity.

Insulation

The electrical insulation system should be suitable for the expected operating conditions.

Abnormal Operation

The appliance may be evaluated under abnormal or foreseeable fault conditions.

Optical Radiation Safety

The characteristics of the radiation source and the intended exposure conditions should be assessed against applicable requirements.

Protection and Interlocks

Where applicable, protective covers, shields, sensors and safety interlocks should function correctly.

Marking and Instructions

Appropriate warnings, operating instructions and safety information should be provided.

The precise testing requirements must be established based on the product's technology and applicable BIS testing scope.

Factory Inspection Process

During a BIS factory inspection, the manufacturer may need to demonstrate the ability to consistently manufacture compliant products.

The inspection may cover:

Raw-material control
Optical source quality
Electrical components
Assembly process
Wiring
Safety controls
Protective mechanisms
Final product testing
Quality-control records
Testing equipment
Calibration
Traceability
Non-conforming product control

Manufacturers should ensure that required facilities and records are ready before inspection.

Common Reasons for BIS Certification Rejection or Delay

Common issues may include:

Incorrect product classification
Incorrect standard selection
Incomplete documentation
Inconsistent technical specifications
Laboratory test failure
Electrical safety issues
Excessive temperature rise
Insulation failure
Leakage current failure
Electric strength failure
Inadequate protective mechanisms
Optical radiation-related non-conformity
Incorrect product marking
Missing testing equipment
Expired calibration certificates
Incomplete quality-control records
Factory inspection observations
Incorrect model grouping
Uncontrolled changes to critical components

A technical pre-assessment before formal application can help reduce avoidable delays.

BIS Certification Cost Factors

The overall cost may depend on:

BIS government fees
Laboratory testing charges
Number of models
Number of variants
Product complexity
Testing requirements
Factory inspection
Additional testing
Documentation
Consultancy charges

Testing charges vary by laboratory and applicable test scope. BIS laboratory scope documents list Appliances for Skin Exposure to Optical Radiation under IS 302 (Part 1):2024, with laboratory-specific charges that should be confirmed from the latest applicable quotation.

BIS Certification Timeline

The certification timeline depends on:

Product complexity
Documentation readiness
Laboratory availability
Test results
Factory readiness
Inspection scheduling
BIS observations
Corrective actions

Businesses should begin the process well before the applicable implementation date to allow sufficient time for testing, documentation and certification activities.

Benefits of BIS Certification

Applicable BIS certification can provide:

Regulatory compliance
Improved electrical safety
Better product quality
Increased customer confidence
Stronger brand reputation
Better market acceptance
Reduced compliance risks
Improved business credibility
Greater market access

For products involving intentional skin exposure to optical radiation, appropriate safety compliance is particularly important for protecting users and maintaining confidence in the product.

Why Choose Qualitance India?

Qualitance India provides professional BIS Certification Consultancy for electrical and electronic products.

Our support may include:

Product applicability assessment
Standard identification
Technical documentation support
BIS application assistance
Laboratory testing coordination
Factory inspection preparation
BIS query support
Certification follow-up
Post-certification compliance guidance

We help manufacturers understand the BIS certification process and prepare their products and documentation for applicable regulatory requirements.

Step-by-Step BIS Certification Flow Chart

Product Identification
↓
BIS Applicability Assessment
↓
IS 302 (Part 1):2024 Requirement Review
↓
Optical Radiation & Technical Evaluation
↓
Documentation Preparation
↓
Sample Preparation
↓
Laboratory Testing
↓
Test Report Review
↓
BIS Application Submission
↓
Factory Inspection, Where Applicable
↓
Corrective Action, If Required
↓
BIS Technical Evaluation
↓
Grant of BIS Licence
↓
ISI Mark Compliance
↓
Ongoing Quality Control & Surveillance

20 SEO FAQs

1. What is BIS Certification for Appliances for Skin Exposure to Optical Radiation?

It is the applicable BIS conformity assessment requirement for covered electrical appliances that expose the skin to optical radiation. The category is included in the illustrative list under the IS 302 (Part 1):2024 framework.

2. What is the applicable standard?

The applicable general standard is IS 302 (Part 1):2024 | IEC 60335-1:2020.

3. What is the implementation date for this product category?

The implementation date specified in this service brief is 01 August 2026. However, the current official BIS upcoming-QCO page lists 01 October 2026 for the broader IS 302 (Part 1):2024 category, so the exact product-specific date should be verified against the latest applicable notification.

4. Which products may be covered?

Products using optical radiation for skin exposure, including certain UV, LED, infrared and light-based skin appliances, may require assessment depending on their design and intended application.

5. Is BIS certification mandatory for UV skin appliances?

Where the product falls under a mandatory BIS/QCO category, applicable BIS certification requirements must be fulfilled before market placement.

6. Do LED skin treatment appliances require BIS certification?

The product should be assessed based on its function, construction and applicable BIS regulatory scope.

7. Does BIS certification apply to infrared skin appliances?

Potentially, depending on the product's intended use, construction and applicable regulatory requirements.

8. Is laboratory testing required?

Testing may be required as part of the applicable BIS certification process.

9. Is factory inspection required?

Factory inspection depends on the applicable BIS conformity assessment procedure.

10. What documents are required?

Technical specifications, circuit diagrams, BOM, optical source details, product drawings, factory documents and applicable test reports may be required.

11. How much does BIS certification cost?

The cost depends on the product, number of models, laboratory testing, BIS fees, inspection and other applicable expenses.

12. How long does BIS certification take?

The timeline varies according to testing, documentation, laboratory availability and BIS processing.

13. Can imported optical radiation appliances be sold in India without BIS certification?

If the product is subject to mandatory BIS certification, the applicable certification requirements must be fulfilled before legal market placement.

14. Can multiple models be included under one BIS licence?

Model grouping depends on applicable BIS guidelines and the technical similarity of the products.

15. What happens if the product fails testing?

The manufacturer may need to correct the identified issue and complete applicable re-testing.

16. Why is optical radiation safety important?

Because these products intentionally expose the skin to optical radiation, appropriate controls and safety requirements are important to minimize potential risks.

17. Are beauty-care light devices covered under BIS requirements?

Some beauty-care light-based appliances may fall within relevant BIS categories, but product-specific applicability should be assessed.

18. Does BIS certification increase customer confidence?

Yes. Compliance with applicable BIS requirements can demonstrate a manufacturer's commitment to product safety and quality.

19. Can Qualitance India help with BIS testing?

Yes. Qualitance India can assist with applicable laboratory testing coordination and BIS certification consultancy.

20. How can I start BIS Certification for an Optical Radiation Appliance?

Begin with a product applicability assessment, followed by standard review, documentation, laboratory testing and the applicable BIS certification process.

FAQ Schema Content

Use the above 20 visible FAQs as the basis for your website's FAQ Schema. The questions and answers in the schema should exactly match the FAQ content visible on the webpage.

Do not create hidden FAQ content only for search engines. Keep the schema consistent with the actual page content.

Featured Snippet Optimized Answer

What is BIS Certification for Appliances for Skin Exposure to Optical Radiation?

BIS Certification for Appliances for Skin Exposure to Optical Radiation is the applicable conformity assessment requirement for covered electrical appliances designed to expose skin to optical radiation. The category is included in the illustrative product list under IS 302 (Part 1):2024 | IEC 60335-1:2020. Depending on the product, compliance evaluation may address electrical safety, temperature rise, insulation, leakage current, electric strength, construction, protective mechanisms and applicable optical-radiation safety considerations.

Voice Search Optimization

“Do Appliances for Skin Exposure to Optical Radiation require BIS certification in India?”

“What is the BIS standard for optical radiation appliances?”

“Is BIS certification required for UV skin treatment appliances?”

“Do LED skin treatment appliances require BIS certification?”

“How can I get BIS certification for optical radiation appliances?”

“What is the implementation date for Appliances for Skin Exposure to Optical Radiation?”

SEO Tags Naturally Integrated for Search

BIS Certification for Appliances for Skin Exposure to Optical Radiation, BIS Certification Consultancy for Optical Radiation Appliances, BIS Certification for UV Skin Appliances, BIS Certification for LED Skin Treatment Devices, BIS Certification for Infrared Skin Appliances, Optical Radiation Appliance BIS Licence, IS 302 Part 1:2024, IEC 60335-1:2020, BIS Certification for Skin Treatment Appliances, BIS Certification for Light-Based Skin Appliances, BIS Testing for Optical Radiation Appliances, BIS Laboratory Testing, BIS Factory Inspection, ISI Mark Certification, Electrical Appliance Certification, QCO 2026, BIS Consultant in India.

Image ALT Tags

BIS Certification for Appliances for Skin Exposure to Optical Radiation
BIS Certification Consultancy for Optical Radiation Appliances
IS 302 Part 1:2024 BIS Certification
BIS Certification for UV Skin Exposure Appliances
BIS Certification for LED Skin Treatment Appliances
BIS Certification for Infrared Skin Appliances
BIS Licence for Optical Radiation Appliances in India
ISI Mark Certification for Skin Exposure Appliances
BIS Testing for Optical Radiation Appliances
BIS Consultant for Skin Treatment Appliances
BIS Certification for Light-Based Skin Appliances
BIS Certification Consultancy Qualitance India
Optical Radiation Appliance BIS Certification Process
BIS Certification for Beauty and Skin Care Appliances
IS 302 Part 1:2024 Electrical Appliance Certification

Internal Linking Strategy

Naturally link this page to relevant Qualitance India service pages, such as:

BIS Certification under IS 302 (Part 1):2024
BIS Certification for Skin Beauty Care Appliances
BIS Certification for Sauna Heating Appliances and Infrared Cabins
BIS Certification for Electrical Shavers, Hair Clippers and Similar Appliances
BIS Certification for Massage Appliances
BIS Certification for Oral Hygiene Appliances
BIS Certification for Air-Cleaning Appliances
BIS Certification for Foot Warmers and Heating Mats
BIS Certification for Water-Bed Heaters
Complete BIS Certification Process in India
BIS Laboratory Testing Services
BIS Factory Inspection Consultancy

Use descriptive anchor text such as “BIS Certification for Skin Beauty Care Appliances” rather than generic anchors such as “Click Here.”

External Authority References

For regulatory information, prioritize official BIS sources:

Bureau of Indian Standards – Scheme-I (ISI Mark Scheme): The official BIS Scheme-I page lists IS 302 (Part 1):2024 and the illustrative product categories, including Appliances for Skin Exposure to Optical Radiation.

BIS Upcoming QCOs: Use the official BIS page to verify current implementation dates and regulatory updates.

BIS Laboratory Information Management System (LIMS): Use BIS LIMS to verify applicable laboratory testing scopes and current testing information.

Related BIS Services

BIS Certification for Skin Beauty Care Appliances
BIS Certification for Beauty Care Appliances Incorporating Lasers and Intense Light Sources
BIS Certification for Oral Hygiene Appliances
BIS Certification for Electrical Shavers and Hair Clippers
BIS Certification for Massage Appliances
BIS Certification for Sauna Heating Appliances and Infrared Cabins
BIS Certification for Appliances for Skin Exposure to Optical Radiation
BIS Certification for DC and Battery-Operated Personal Care Appliances
BIS Certification for Electrical Appliances under IS 302 (Part 1):2024

Related Blog Suggestions

BIS Certification for Skin Beauty Care Appliances – Complete Guide
BIS Certification for Beauty Care Appliances Incorporating Lasers and Intense Light Sources
IS 302 (Part 1):2024 – Complete BIS Certification Guide for Electrical Appliances
BIS Certification for UV and LED-Based Skin Treatment Appliances
BIS Certification for Infrared Skin Treatment Appliances
BIS Certification Cost and Timeline in India
BIS Laboratory Testing Process for Electrical Appliances
BIS Factory Inspection Process – Complete Guide
QCO 2026 for Electrical Appliances – Important Compliance Update
BIS Certification for Imported Electrical Appliances in India

Strong Lead Generation CTA

Need BIS Certification for Appliances for Skin Exposure to Optical Radiation?

Are you a manufacturer, importer, OEM or brand dealing in optical radiation appliances, UV devices, LED skin treatment products or similar electrical appliances?

Qualitance India can assist you with:

Contact Qualitance India Today

Phone: +91 93106 15170
Email: info@qualitanceindia.com
Website: qualitanceindia.com

Get Expert BIS Certification Consultancy for Appliances for Skin Exposure to Optical Radiation as per IS 302 (Part 1):2024.

SEO-Optimized Conclusion

Appliances for Skin Exposure to Optical Radiation represent an important category of electrical products used in beauty, skincare, wellness and similar applications. Because these products intentionally expose users to optical radiation, appropriate electrical safety, product construction and radiation-related safety considerations are important.

The BIS official Scheme-I product list includes Appliances for Skin Exposure to Optical Radiation within the illustrative categories associated with IS 302 (Part 1):2024 | IEC 60335-1:2020. Manufacturers and importers should therefore carefully evaluate their products against the latest BIS requirements and applicable QCO provisions.

For businesses preparing for the 01 August 2026 implementation date specified for this service page, early preparation can help provide sufficient time for product assessment, documentation, testing and certification activities. However, because the current official BIS upcoming-QCO page lists 01 October 2026 for the broader IS 302 (Part 1):2024 category, the exact product-specific implementation provision should be verified before treating 01 August 2026 as the final statutory deadline.

Qualitance India provides professional BIS Certification Consultancy to help manufacturers and businesses understand applicable requirements and navigate the certification process efficiently.

Prepare Your Optical Radiation Appliance for BIS Compliance. Contact Qualitance India for Professional BIS Certification Consultancy Today.

BIS Certification for Appliances for Skin Exposure to Optical Radiation as per IS 302 (Part 1):2024 | I